-
-
-/*
- * Exception handling. Something went wrong and we can't proceed. We
- * ought to tell the user, but since we don't have any guarantee that
- * we're even running on the right architecture, we do virtually nothing.
- *
- * If CONFIG_DEBUG_LL is set we try to print out something about the error
- * and hope for the best (useful if bootloader fails to pass a proper
- * machine ID for example).
- */
-
- .type __error_p, %function
-__error_p:
-#ifdef CONFIG_DEBUG_LL
- adr r0, str_p1
- bl printascii
- b __error
-str_p1: .asciz "\nError: unrecognized/unsupported processor variant.\n"
- .align
-#endif
-
- .type __error_a, %function
-__error_a:
-#ifdef CONFIG_DEBUG_LL
- mov r4, r1 @ preserve machine ID
- adr r0, str_a1
- bl printascii
- mov r0, r4
- bl printhex8
- adr r0, str_a2
- bl printascii
- adr r3, 3f
- ldmia r3, {r4, r5, r6} @ get machine desc list
- sub r4, r3, r4 @ get offset between virt&phys
- add r5, r5, r4 @ convert virt addresses to
- add r6, r6, r4 @ physical address space
-1: ldr r0, [r5, #MACHINFO_TYPE] @ get machine type
- bl printhex8
- mov r0, #'\t'
- bl printch
- ldr r0, [r5, #MACHINFO_NAME] @ get machine name
- add r0, r0, r4
- bl printascii
- mov r0, #'\n'
- bl printch
- add r5, r5, #SIZEOF_MACHINE_DESC @ next machine_desc
- cmp r5, r6
- blo 1b
- adr r0, str_a3
- bl printascii
- b __error
-str_a1: .asciz "\nError: unrecognized/unsupported machine ID (r1 = 0x"
-str_a2: .asciz ").\n\nAvailable machine support:\n\nID (hex)\tNAME\n"
-str_a3: .asciz "\nPlease check your kernel config and/or bootloader.\n"
- .align
-#endif
-
- .type __error, %function
-__error:
-#ifdef CONFIG_ARCH_RPC
-/*
- * Turn the screen red on a error - RiscPC only.
- */
- mov r0, #0x02000000
- mov r3, #0x11
- orr r3, r3, r3, lsl #8
- orr r3, r3, r3, lsl #16
- str r3, [r0], #4
- str r3, [r0], #4
- str r3, [r0], #4
- str r3, [r0], #4
-#endif
-1: mov r0, r0
- b 1b
-
-
-/*
- * Read processor ID register (CP#15, CR0), and look up in the linker-built
- * supported processor list. Note that we can't use the absolute addresses
- * for the __proc_info lists since we aren't running with the MMU on
- * (and therefore, we are not in the correct address space). We have to
- * calculate the offset.
- *
- * Returns:
- * r3, r4, r6 corrupted
- * r5 = proc_info pointer in physical address space
- * r9 = cpuid
- */
- .type __lookup_processor_type, %function
-__lookup_processor_type:
- adr r3, 3f
- ldmda r3, {r5, r6, r9}
- sub r3, r3, r9 @ get offset between virt&phys
- add r5, r5, r3 @ convert virt addresses to
- add r6, r6, r3 @ physical address space
- mrc p15, 0, r9, c0, c0 @ get processor id
-1: ldmia r5, {r3, r4} @ value, mask
- and r4, r4, r9 @ mask wanted bits
- teq r3, r4
- beq 2f
- add r5, r5, #PROC_INFO_SZ @ sizeof(proc_info_list)
- cmp r5, r6
- blo 1b
- mov r5, #0 @ unknown processor
-2: mov pc, lr
-
-/*
- * This provides a C-API version of the above function.
- */
-ENTRY(lookup_processor_type)
- stmfd sp!, {r4 - r6, r9, lr}
- bl __lookup_processor_type
- mov r0, r5
- ldmfd sp!, {r4 - r6, r9, pc}
-
-/*
- * Look in include/asm-arm/procinfo.h and arch/arm/kernel/arch.[ch] for
- * more information about the __proc_info and __arch_info structures.
- */
- .long __proc_info_begin
- .long __proc_info_end
-3: .long .
- .long __arch_info_begin
- .long __arch_info_end
-
-/*
- * Lookup machine architecture in the linker-build list of architectures.
- * Note that we can't use the absolute addresses for the __arch_info
- * lists since we aren't running with the MMU on (and therefore, we are
- * not in the correct address space). We have to calculate the offset.
- *
- * r1 = machine architecture number
- * Returns:
- * r3, r4, r6 corrupted
- * r5 = mach_info pointer in physical address space
- */
- .type __lookup_machine_type, %function
-__lookup_machine_type:
- adr r3, 3b
- ldmia r3, {r4, r5, r6}
- sub r3, r3, r4 @ get offset between virt&phys
- add r5, r5, r3 @ convert virt addresses to
- add r6, r6, r3 @ physical address space
-1: ldr r3, [r5, #MACHINFO_TYPE] @ get machine type
- teq r3, r1 @ matches loader number?
- beq 2f @ found
- add r5, r5, #SIZEOF_MACHINE_DESC @ next machine_desc
- cmp r5, r6
- blo 1b
- mov r5, #0 @ unknown machine
-2: mov pc, lr
-
-/*
- * This provides a C-API version of the above function.
- */
-ENTRY(lookup_machine_type)
- stmfd sp!, {r4 - r6, lr}
- mov r1, r0
- bl __lookup_machine_type
- mov r0, r5
- ldmfd sp!, {r4 - r6, pc}