vserver 1.9.5.x5

[linux-2.6.git] / arch / arm / mach-ixp4xx / Kconfig

diff --git a/arch/arm/mach-ixp4xx/Kconfig b/arch/arm/mach-ixp4xx/Kconfig
index 46b72e1..aacb5f9 100644 (file)
--- a/arch/arm/mach-ixp4xx/Kconfig
+++ b/arch/arm/mach-ixp4xx/Kconfig
@@ -13,22 +13,37 @@ config ARCH_AVILA
        help
          Say 'Y' here if you want your kernel to support the Gateworks
          Avila Network Platform. For more information on this platform,
        help
          Say 'Y' here if you want your kernel to support the Gateworks
          Avila Network Platform. For more information on this platform,

-         see Documentation/arm/IXP4xx.
+         see <file:Documentation/arm/IXP4xx>.

 
 config ARCH_ADI_COYOTE
        bool "Coyote"
        help
          Say 'Y' here if you want your kernel to support the ADI 
          Engineering Coyote Gateway Reference Platform. For more
 
 config ARCH_ADI_COYOTE
        bool "Coyote"
        help
          Say 'Y' here if you want your kernel to support the ADI 
          Engineering Coyote Gateway Reference Platform. For more

-         information on this platform, see Documentation/arm/IXP4xx.
+         information on this platform, see <file:Documentation/arm/IXP4xx>.

 
 config ARCH_IXDP425
        bool "IXDP425"
        help
          Say 'Y' here if you want your kernel to support Intel's 
          IXDP425 Development Platform (Also known as Richfield).  
 
 config ARCH_IXDP425
        bool "IXDP425"
        help
          Say 'Y' here if you want your kernel to support Intel's 
          IXDP425 Development Platform (Also known as Richfield).  

+         For more information on this platform, see <file:Documentation/arm/IXP4xx>.
+
+config MACH_IXDPG425
+       bool "IXDPG425"
+       help
+         Say 'Y' here if you want your kernel to support Intel's
+         IXDPG425 Development Platform (Also known as Montajade).
+         For more information on this platform, see <file:Documentation/arm/IXP4xx>.
+
+config MACH_IXDP465
+       bool "IXDP465"
+       help
+         Say 'Y' here if you want your kernel to support Intel's
+         IXDP465 Development Platform (Also known as BMP).

          For more information on this platform, see Documentation/arm/IXP4xx.
 
          For more information on this platform, see Documentation/arm/IXP4xx.
 

+

 #
 # IXCDP1100 is the exact same HW as IXDP425, but with a different machine 
 # number from the bootloader due to marketing monkeys, so we just enable it 
 #
 # IXCDP1100 is the exact same HW as IXDP425, but with a different machine 
 # number from the bootloader due to marketing monkeys, so we just enable it 


@@ -44,16 +59,42 @@ config ARCH_PRPMC1100
        help
          Say 'Y' here if you want your kernel to support the Motorola
          PrPCM1100 Processor Mezanine Module. For more information on
        help
          Say 'Y' here if you want your kernel to support the Motorola
          PrPCM1100 Processor Mezanine Module. For more information on

-         this platform, see Documentation/arm/IXP4xx.
+         this platform, see <file:Documentation/arm/IXP4xx>.

 
 #
 # Avila and IXDP share the same source for now. Will change in future
 #
 config ARCH_IXDP4XX
        bool
 
 #
 # Avila and IXDP share the same source for now. Will change in future
 #
 config ARCH_IXDP4XX
        bool

-       depends on ARCH_IXDP425 || ARCH_AVILA
+       depends on ARCH_IXDP425 || ARCH_AVILA || MACH_IXDP465
+       default y
+
+#
+# Certain registers and IRQs are only enabled if supporting IXP465 CPUs
+#
+config CPU_IXP46X
+       bool
+       depends on MACH_IXDP465

        default y
 
        default y
 

+config MACH_GTWX5715
+       bool "Gemtek WX5715 (Linksys WRV54G)"
+       depends on ARCH_IXP4XX
+       help
+               This board is currently inside the Linksys WRV54G Gateways.
+
+               IXP425 - 266mhz
+               32mb SDRAM
+               8mb Flash
+               miniPCI slot 0 does not have a card connector soldered to the board
+               miniPCI slot 1 has an ISL3880 802.11g card (Prism54)
+               npe0 is connected to a Kendin KS8995M Switch (4 ports)
+               npe1 is the "wan" port
+               "Console" UART is available on J11 as console
+               "High Speed" UART is n/c (as far as I can tell)
+               20 Pin ARM/Xscale JTAG interface on J2
+
+

 comment "IXP4xx Options"
 
 config IXP4XX_INDIRECT_PCI
 comment "IXP4xx Options"
 
 config IXP4XX_INDIRECT_PCI


@@ -64,7 +105,7 @@ config IXP4XX_INDIRECT_PCI
           1) A direct mapped window from 0x48000000 to 0x4bffffff (64MB).
              To access PCI via this space, we simply ioremap() the BAR
              into the kernel and we can use the standard read[bwl]/write[bwl]
           1) A direct mapped window from 0x48000000 to 0x4bffffff (64MB).
              To access PCI via this space, we simply ioremap() the BAR
              into the kernel and we can use the standard read[bwl]/write[bwl]

-             macros. This is the preffered method due to speed but it
+             macros. This is the preferred method due to speed but it

              limits the system to just 64MB of PCI memory. This can be 
              problamatic if using video cards and other memory-heavy devices.
           
              limits the system to just 64MB of PCI memory. This can be 
              problamatic if using video cards and other memory-heavy devices.