+static void idp_backlight_power(int on)
+{
+ if (on) {
+ IDP_CPLD_LCD |= (1<<1);
+ } else {
+ IDP_CPLD_LCD &= ~(1<<1);
+ }
+}
+
+static void idp_vlcd(int on)
+{
+ if (on) {
+ IDP_CPLD_LCD |= (1<<2);
+ } else {
+ IDP_CPLD_LCD &= ~(1<<2);
+ }
+}
+
+static void idp_lcd_power(int on, struct fb_var_screeninfo *var)
+{
+ if (on) {
+ IDP_CPLD_LCD |= (1<<0);
+ } else {
+ IDP_CPLD_LCD &= ~(1<<0);
+ }
+
+ /* call idp_vlcd for now as core driver does not support
+ * both power and vlcd hooks. Note, this is not technically
+ * the correct sequence, but seems to work. Disclaimer:
+ * this may eventually damage the display.
+ */
+
+ idp_vlcd(on);
+}
+
+static struct pxafb_mode_info sharp_lm8v31_mode = {
+ .pixclock = 270000,
+ .xres = 640,
+ .yres = 480,
+ .bpp = 16,
+ .hsync_len = 1,
+ .left_margin = 3,
+ .right_margin = 3,
+ .vsync_len = 1,
+ .upper_margin = 0,
+ .lower_margin = 0,
+ .sync = FB_SYNC_HOR_HIGH_ACT | FB_SYNC_VERT_HIGH_ACT,
+ .cmap_greyscale = 0,
+};
+
+static struct pxafb_mach_info sharp_lm8v31 = {
+ .modes = &sharp_lm8v31_mode,
+ .num_modes = 1,
+ .cmap_inverse = 0,
+ .cmap_static = 0,
+ .lccr0 = LCCR0_SDS,
+ .lccr3 = LCCR3_PCP | LCCR3_Acb(255),
+ .pxafb_backlight_power = &idp_backlight_power,
+ .pxafb_lcd_power = &idp_lcd_power
+};
+
+static int idp_mci_init(struct device *dev, irq_handler_t idp_detect_int, void *data)
+{
+ /* setup GPIO for PXA25x MMC controller */
+ pxa_gpio_mode(GPIO6_MMCCLK_MD);
+ pxa_gpio_mode(GPIO8_MMCCS0_MD);
+
+ return 0;
+}
+
+static struct pxamci_platform_data idp_mci_platform_data = {
+ .ocr_mask = MMC_VDD_32_33|MMC_VDD_33_34,
+ .init = idp_mci_init,
+};