-#include <asm/sn/sn2/sn_hwperf.h>
-
-/*
- * 1/26/2006
- *
- * WAR for SGI PV 944642. For revA TIOCE, need to use the following recipe
- * (taken from the above PV) before and after accessing tioce internal MMR's
- * to avoid tioce lockups.
- *
- * The recipe as taken from the PV:
- *
- * if(mmr address < 0x45000) {
- * if(mmr address == 0 or 0x80)
- * mmr wrt or read address 0xc0
- * else if(mmr address == 0x148 or 0x200)
- * mmr wrt or read address 0x28
- * else
- * mmr wrt or read address 0x158
- *
- * do desired mmr access (rd or wrt)
- *
- * if(mmr address == 0x100)
- * mmr wrt or read address 0x38
- * mmr wrt or read address 0xb050
- * } else
- * do desired mmr access
- *
- * According to hw, we can use reads instead of writes to the above addres
- *
- * Note this WAR can only to be used for accessing internal MMR's in the
- * TIOCE Coretalk Address Range 0x0 - 0x07ff_ffff. This includes the
- * "Local CE Registers and Memories" and "PCI Compatible Config Space" address
- * spaces from table 2-1 of the "CE Programmer's Reference Overview" document.
- *
- * All registers defined in struct tioce will meet that criteria.
- */
-
-static void inline
-tioce_mmr_war_pre(struct tioce_kernel *kern, void *mmr_addr)
-{
- u64 mmr_base;
- u64 mmr_offset;
-
- if (kern->ce_common->ce_rev != TIOCE_REV_A)
- return;
-
- mmr_base = kern->ce_common->ce_pcibus.bs_base;
- mmr_offset = (u64)mmr_addr - mmr_base;
-
- if (mmr_offset < 0x45000) {
- u64 mmr_war_offset;
-
- if (mmr_offset == 0 || mmr_offset == 0x80)
- mmr_war_offset = 0xc0;
- else if (mmr_offset == 0x148 || mmr_offset == 0x200)
- mmr_war_offset = 0x28;
- else
- mmr_war_offset = 0x158;
-
- readq_relaxed((void __iomem *)(mmr_base + mmr_war_offset));
- }
-}
-
-static void inline
-tioce_mmr_war_post(struct tioce_kernel *kern, void *mmr_addr)
-{
- u64 mmr_base;
- u64 mmr_offset;
-
- if (kern->ce_common->ce_rev != TIOCE_REV_A)
- return;
-
- mmr_base = kern->ce_common->ce_pcibus.bs_base;
- mmr_offset = (u64)mmr_addr - mmr_base;
-
- if (mmr_offset < 0x45000) {
- if (mmr_offset == 0x100)
- readq_relaxed((void __iomem *)(mmr_base + 0x38));
- readq_relaxed((void __iomem *)(mmr_base + 0xb050));
- }
-}
-
-/* load mmr contents into a variable */
-#define tioce_mmr_load(kern, mmrp, varp) do {\
- tioce_mmr_war_pre(kern, mmrp); \
- *(varp) = readq_relaxed(mmrp); \
- tioce_mmr_war_post(kern, mmrp); \
-} while (0)
-
-/* store variable contents into mmr */
-#define tioce_mmr_store(kern, mmrp, varp) do {\
- tioce_mmr_war_pre(kern, mmrp); \
- writeq(*varp, mmrp); \
- tioce_mmr_war_post(kern, mmrp); \
-} while (0)
-
-/* store immediate value into mmr */
-#define tioce_mmr_storei(kern, mmrp, val) do {\
- tioce_mmr_war_pre(kern, mmrp); \
- writeq(val, mmrp); \
- tioce_mmr_war_post(kern, mmrp); \
-} while (0)
-
-/* set bits (immediate value) into mmr */
-#define tioce_mmr_seti(kern, mmrp, bits) do {\
- u64 tmp; \
- tioce_mmr_load(kern, mmrp, &tmp); \
- tmp |= (bits); \
- tioce_mmr_store(kern, mmrp, &tmp); \
-} while (0)
-
-/* clear bits (immediate value) into mmr */
-#define tioce_mmr_clri(kern, mmrp, bits) do { \
- u64 tmp; \
- tioce_mmr_load(kern, mmrp, &tmp); \
- tmp &= ~(bits); \
- tioce_mmr_store(kern, mmrp, &tmp); \
-} while (0)