- if (irq >= NR_IRQS)
- return -EINVAL;
- if (!handler)
- return -EINVAL;
-
- action = (struct irqaction *)
- kmalloc(sizeof(struct irqaction), GFP_ATOMIC);
- if (!action)
- return -ENOMEM;
-
- action->handler = handler;
- action->flags = irqflags;
- cpus_clear(action->mask);
- action->name = devname;
- action->next = NULL;
- action->dev_id = dev_id;
-
- retval = setup_irq(irq, action);
- if (retval)
- kfree(action);
- return retval;
-}
-
-EXPORT_SYMBOL(request_irq);
-
-/**
- * free_irq - free an interrupt
- * @irq: Interrupt line to free
- * @dev_id: Device identity to free
- *
- * Remove an interrupt handler. The handler is removed and if the
- * interrupt line is no longer in use by any driver it is disabled.
- * On a shared IRQ the caller must ensure the interrupt is disabled
- * on the card it drives before calling this function. The function
- * does not return until any executing interrupts for this IRQ
- * have completed.
- *
- * This function must not be called from interrupt context.
- */
-
-void free_irq(unsigned int irq, void *dev_id)
-{
- irq_desc_t *desc;
- struct irqaction **p;
- unsigned long flags;
-
- if (irq >= NR_IRQS)
- return;
-
- desc = irq_desc + irq;
- spin_lock_irqsave(&desc->lock,flags);
- p = &desc->action;
- for (;;) {
- struct irqaction * action = *p;
- if (action) {
- struct irqaction **pp = p;
- p = &action->next;
- if (action->dev_id != dev_id)
- continue;
-
- /* Found it - now remove it from the list of entries */
- *pp = action->next;
- if (!desc->action) {
- desc->status |= IRQ_DISABLED;
- desc->handler->shutdown(irq);
- }
- spin_unlock_irqrestore(&desc->lock,flags);
-
- /* Wait to make sure it's not being used on another CPU */
- synchronize_irq(irq);
- kfree(action);
- return;
- }
- printk("Trying to free free IRQ%d\n",irq);
- spin_unlock_irqrestore(&desc->lock,flags);
- return;
- }
-}
-
-EXPORT_SYMBOL(free_irq);
-
-/*
- * IRQ autodetection code..
- *
- * This depends on the fact that any interrupt that
- * comes in on to an unassigned handler will get stuck
- * with "IRQ_WAITING" cleared and the interrupt
- * disabled.
- */
-
-static DECLARE_MUTEX(probe_sem);
-
-/**
- * probe_irq_on - begin an interrupt autodetect
- *
- * Commence probing for an interrupt. The interrupts are scanned
- * and a mask of potential interrupt lines is returned.
- *
- */
-
-unsigned long probe_irq_on(void)
-{
- unsigned int i;
- irq_desc_t *desc;
- unsigned long val;
- unsigned long delay;
-
- down(&probe_sem);
- /*
- * something may have generated an irq long ago and we want to
- * flush such a longstanding irq before considering it as spurious.
- */
- for (i = NR_IRQS-1; i > 0; i--) {
- desc = irq_desc + i;
-
- spin_lock_irq(&desc->lock);
- if (!irq_desc[i].action)
- irq_desc[i].handler->startup(i);
- spin_unlock_irq(&desc->lock);
- }
-
- /* Wait for longstanding interrupts to trigger. */
- for (delay = jiffies + HZ/50; time_after(delay, jiffies); )
- /* about 20ms delay */ barrier();
-
- /*
- * enable any unassigned irqs
- * (we must startup again here because if a longstanding irq
- * happened in the previous stage, it may have masked itself)
- */
- for (i = NR_IRQS-1; i > 0; i--) {
- desc = irq_desc + i;
-
- spin_lock_irq(&desc->lock);
- if (!desc->action) {
- desc->status |= IRQ_AUTODETECT | IRQ_WAITING;
- if (desc->handler->startup(i))
- desc->status |= IRQ_PENDING;
- }
- spin_unlock_irq(&desc->lock);
- }
-
- /*
- * Wait for spurious interrupts to trigger
- */
- for (delay = jiffies + HZ/10; time_after(delay, jiffies); )
- /* about 100ms delay */ barrier();
-
- /*
- * Now filter out any obviously spurious interrupts
- */
- val = 0;
- for (i = 0; i < NR_IRQS; i++) {
- irq_desc_t *desc = irq_desc + i;
- unsigned int status;
-
- spin_lock_irq(&desc->lock);
- status = desc->status;
-
- if (status & IRQ_AUTODETECT) {
- /* It triggered already - consider it spurious. */
- if (!(status & IRQ_WAITING)) {
- desc->status = status & ~IRQ_AUTODETECT;
- desc->handler->shutdown(i);
- } else
- if (i < 32)
- val |= 1 << i;
- }
- spin_unlock_irq(&desc->lock);
- }
-
- return val;
-}
-
-EXPORT_SYMBOL(probe_irq_on);
-
-/*
- * Return a mask of triggered interrupts (this
- * can handle only legacy ISA interrupts).
- */
-
-/**
- * probe_irq_mask - scan a bitmap of interrupt lines
- * @val: mask of interrupts to consider
- *
- * Scan the ISA bus interrupt lines and return a bitmap of
- * active interrupts. The interrupt probe logic state is then
- * returned to its previous value.
- *
- * Note: we need to scan all the irq's even though we will
- * only return ISA irq numbers - just so that we reset them
- * all to a known state.
- */
-unsigned int probe_irq_mask(unsigned long val)
-{
- int i;
- unsigned int mask;
-
- mask = 0;
- for (i = 0; i < NR_IRQS; i++) {
- irq_desc_t *desc = irq_desc + i;
- unsigned int status;
-
- spin_lock_irq(&desc->lock);
- status = desc->status;
-
- if (status & IRQ_AUTODETECT) {
- if (i < 16 && !(status & IRQ_WAITING))
- mask |= 1 << i;
-
- desc->status = status & ~IRQ_AUTODETECT;
- desc->handler->shutdown(i);
- }
- spin_unlock_irq(&desc->lock);
- }
- up(&probe_sem);
-
- return mask & val;
-}
-
-/*
- * Return the one interrupt that triggered (this can
- * handle any interrupt source).
- */
-
-/**
- * probe_irq_off - end an interrupt autodetect
- * @val: mask of potential interrupts (unused)
- *
- * Scans the unused interrupt lines and returns the line which
- * appears to have triggered the interrupt. If no interrupt was
- * found then zero is returned. If more than one interrupt is
- * found then minus the first candidate is returned to indicate
- * there is doubt.
- *
- * The interrupt probe logic state is returned to its previous
- * value.
- *
- * BUGS: When used in a module (which arguably shouldnt happen)
- * nothing prevents two IRQ probe callers from overlapping. The
- * results of this are non-optimal.
- */
-
-int probe_irq_off(unsigned long val)
-{
- int i, irq_found, nr_irqs;
-
- nr_irqs = 0;
- irq_found = 0;
- for (i = 0; i < NR_IRQS; i++) {
- irq_desc_t *desc = irq_desc + i;
- unsigned int status;
-
- spin_lock_irq(&desc->lock);
- status = desc->status;
-
- if (status & IRQ_AUTODETECT) {
- if (!(status & IRQ_WAITING)) {
- if (!nr_irqs)
- irq_found = i;
- nr_irqs++;
- }
- desc->status = status & ~IRQ_AUTODETECT;
- desc->handler->shutdown(i);
- }
- spin_unlock_irq(&desc->lock);
- }
- up(&probe_sem);
-
- if (nr_irqs > 1)
- irq_found = -irq_found;
- return irq_found;
-}
-
-EXPORT_SYMBOL(probe_irq_off);
-
-/* this was setup_x86_irq but it seems pretty generic */
-int setup_irq(unsigned int irq, struct irqaction * new)
-{
- int shared = 0;
- unsigned long flags;
- struct irqaction *old, **p;
- irq_desc_t *desc = irq_desc + irq;
-
- /*
- * Some drivers like serial.c use request_irq() heavily,
- * so we have to be careful not to interfere with a
- * running system.
- */
- if (new->flags & SA_SAMPLE_RANDOM) {
- /*
- * This function might sleep, we want to call it first,
- * outside of the atomic block.
- * Yes, this might clear the entropy pool if the wrong
- * driver is attempted to be loaded, without actually
- * installing a new handler, but is this really a problem,
- * only the sysadmin is able to do this.
- */
- rand_initialize_irq(irq);
- }
-
- /*
- * The following block of code has to be executed atomically
- */
- spin_lock_irqsave(&desc->lock,flags);
- p = &desc->action;
- if ((old = *p) != NULL) {
- /* Can't share interrupts unless both agree to */
- if (!(old->flags & new->flags & SA_SHIRQ)) {
- spin_unlock_irqrestore(&desc->lock,flags);
- return -EBUSY;
- }
-
- /* add new interrupt at end of irq queue */
- do {
- p = &old->next;
- old = *p;
- } while (old);
- shared = 1;
- }
-
- *p = new;
-
- if (!shared) {
- desc->depth = 0;
- desc->status &= ~(IRQ_DISABLED | IRQ_AUTODETECT | IRQ_WAITING | IRQ_INPROGRESS);
- desc->handler->startup(irq);
- }
- spin_unlock_irqrestore(&desc->lock,flags);
-
- register_irq_proc(irq);
- return 0;
-}
-
-void __init init_generic_irq(void)