+ callback_init_IRQ();
+
+ /* u-boot doesn't always set the board up correctly */
+ mc->memc_br5 = 0;
+ mc->memc_or5 = 0xfff00856;
+ mc->memc_br5 = 0x22000801;
+
+ sbc82xx_i8259_map = ioremap(0x22008000, 2);
+ if (!sbc82xx_i8259_map) {
+ printk(KERN_CRIT "Mapping i8259 interrupt controller failed\n");
+ return;
+ }
+
+ /* Set up the interrupt handlers for the i8259 IRQs */
+ for (i = NR_SIU_INTS; i < NR_SIU_INTS + 8; i++) {
+ irq_desc[i].handler = &sbc82xx_i8259_ic;
+ irq_desc[i].status |= IRQ_LEVEL;
+ }
+
+ /* make IRQ6 level sensitive */
+ ic->ic_siexr &= ~(1 << (14 - (SIU_INT_IRQ6 - SIU_INT_IRQ1)));
+ irq_desc[SIU_INT_IRQ6].status |= IRQ_LEVEL;
+
+ /* Initialise the i8259 */
+ sbc82xx_i8259_map[0] = 0x1b; /* ICW1: Level, no cascade, ICW4 */
+ sbc82xx_i8259_map[1] = 0x00; /* ICW2: vector base */
+ /* No ICW3 (no cascade) */
+ sbc82xx_i8259_map[1] = 0x01; /* ICW4: 8086 mode, normal EOI */
+
+ sbc82xx_i8259_map[0] = 0x0b; /* OCW3: Read IS register on RD# pulse */
+
+ sbc82xx_i8259_map[1] = sbc82xx_i8259_mask; /* Set interrupt mask */
+
+ /* Request cascade IRQ */
+ if (setup_irq(SIU_INT_IRQ6, &sbc82xx_i8259_irqaction)) {
+ printk("Installation of i8259 IRQ demultiplexer failed.\n");
+ }
+}
+
+static int sbc82xx_pci_map_irq(struct pci_dev *dev, unsigned char idsel,
+ unsigned char pin)
+{
+ static char pci_irq_table[][4] = {
+ /*
+ * PCI IDSEL/INTPIN->INTLINE
+ * A B C D
+ */
+ { SBC82xx_PIRQA, SBC82xx_PIRQB, SBC82xx_PIRQC, SBC82xx_PIRQD }, /* IDSEL 16 - PMC slot */
+ { SBC82xx_PC_IRQA, SBC82xx_PC_IRQB, -1, -1 }, /* IDSEL 17 - CardBus */
+ { SBC82xx_PIRQA, SBC82xx_PIRQB, SBC82xx_PIRQC, SBC82xx_PIRQD }, /* IDSEL 18 - PCI-X bridge */
+ };
+
+ const long min_idsel = 16, max_idsel = 18, irqs_per_slot = 4;
+
+ return PCI_IRQ_TABLE_LOOKUP;
+}
+
+static void __devinit quirk_sbc8260_cardbus(struct pci_dev *pdev)
+{
+ uint32_t ctrl;
+
+ if (pdev->bus->number != 0 || pdev->devfn != PCI_DEVFN(17, 0))
+ return;
+
+ printk(KERN_INFO "Setting up CardBus controller\n");
+
+ /* Set P2CCLK bit in System Control Register */
+ pci_read_config_dword(pdev, 0x80, &ctrl);
+ ctrl |= (1<<27);
+ pci_write_config_dword(pdev, 0x80, ctrl);
+
+ /* Set MFUNC up for PCI IRQ routing via INTA and INTB, and LEDs. */
+ pci_write_config_dword(pdev, 0x8c, 0x00c01d22);
+
+}
+DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_TI, PCI_DEVICE_ID_TI_1420, quirk_sbc8260_cardbus);
+
+void __init
+m82xx_board_init(void)
+{