- break;
- case audio_pausing:
- SC.cdsc_audiostatus=CDROM_AUDIO_PAUSED;
- break;
- case audio_completed:
- SC.cdsc_audiostatus=CDROM_AUDIO_COMPLETED;
- break;
- default:
- SC.cdsc_audiostatus=CDROM_AUDIO_NO_STATUS;
- break;
- }
- SC.cdsc_adr=current_drive->SubQ_ctl_adr;
- SC.cdsc_ctrl=current_drive->SubQ_ctl_adr>>4;
- SC.cdsc_trk=bcd2bin(current_drive->SubQ_trk);
- SC.cdsc_ind=bcd2bin(current_drive->SubQ_pnt_idx);
- if (SC.cdsc_format==CDROM_LBA)
- {
- SC.cdsc_absaddr.lba=msf2blk(current_drive->SubQ_run_tot);
- SC.cdsc_reladdr.lba=msf2blk(current_drive->SubQ_run_trk);
- }
- else /* not only if (SC.cdsc_format==CDROM_MSF) */
- {
- SC.cdsc_absaddr.msf.minute=(current_drive->SubQ_run_tot>>16)&0x00FF;
- SC.cdsc_absaddr.msf.second=(current_drive->SubQ_run_tot>>8)&0x00FF;
- SC.cdsc_absaddr.msf.frame=current_drive->SubQ_run_tot&0x00FF;
- SC.cdsc_reladdr.msf.minute=(current_drive->SubQ_run_trk>>16)&0x00FF;
- SC.cdsc_reladdr.msf.second=(current_drive->SubQ_run_trk>>8)&0x00FF;
- SC.cdsc_reladdr.msf.frame=current_drive->SubQ_run_trk&0x00FF;
- }
- memcpy((void *) arg, &SC, sizeof(struct cdrom_subchnl));
- msg(DBG_IOS,"CDROMSUBCHNL: %1X %02X %08X %08X %02X %02X %06X %06X\n",
- SC.cdsc_format,SC.cdsc_audiostatus,
- SC.cdsc_adr,SC.cdsc_ctrl,
- SC.cdsc_trk,SC.cdsc_ind,
- SC.cdsc_absaddr,SC.cdsc_reladdr);
- RETURN_UP(0);
-
- default:
- msg(DBG_IOC,"ioctl: unknown function request %04X\n", cmd);
- RETURN_UP(-EINVAL);
- } /* end switch(cmd) */
-}
-/*==========================================================================*/
-/*
- * Take care of the different block sizes between cdrom and Linux.
- */
-static void sbp_transfer(struct request *req)
-{
- long offs;
-
- while ( (req->nr_sectors > 0) &&
- (req->sector/4 >= current_drive->sbp_first_frame) &&
- (req->sector/4 <= current_drive->sbp_last_frame) )
- {
- offs = (req->sector - current_drive->sbp_first_frame * 4) * 512;
- memcpy(req->buffer, current_drive->sbp_buf + offs, 512);
- req->nr_sectors--;
- req->sector++;
- req->buffer += 512;
- }
-}
-/*==========================================================================*/
-/*
- * special end_request for sbpcd to solve CURRENT==NULL bug. (GTL)
- * GTL = Gonzalo Tornaria <tornaria@cmat.edu.uy>
- *
- * This is a kludge so we don't need to modify end_request.
- * We put the req we take out after INIT_REQUEST in the requests list,
- * so that end_request will discard it.
- *
- * The bug could be present in other block devices, perhaps we
- * should modify INIT_REQUEST and end_request instead, and
- * change every block device..
- *
- * Could be a race here?? Could e.g. a timer interrupt schedule() us?
- * If so, we should copy end_request here, and do it right.. (or
- * modify end_request and the block devices).
- *
- * In any case, the race here would be much small than it was, and
- * I couldn't reproduce..
- *
- * The race could be: suppose CURRENT==NULL. We put our req in the list,
- * and we are scheduled. Other process takes over, and gets into
- * do_sbpcd_request. It sees CURRENT!=NULL (it is == to our req), so
- * proceeds. It ends, so CURRENT is now NULL.. Now we awake somewhere in
- * end_request, but now CURRENT==NULL... oops!
- *
- */
-#undef DEBUG_GTL
-
-/*==========================================================================*/
-/*
- * I/O request routine, called from Linux kernel.
- */
-static void do_sbpcd_request(request_queue_t * q)
-{
- u_int block;
- u_int nsect;
- int status_tries, data_tries;
- struct request *req;
- struct sbpcd_drive *p;
-#ifdef DEBUG_GTL
- static int xx_nr=0;
- int xnr;
-#endif
-
- request_loop:
-#ifdef DEBUG_GTL
- xnr=++xx_nr;
-
- req = elv_next_request(q);
-
- if (!req)
- {
- printk( "do_sbpcd_request[%di](NULL), Pid:%d, Time:%li\n",
- xnr, current->pid, jiffies);
- printk( "do_sbpcd_request[%do](NULL) end 0 (null), Time:%li\n",
- xnr, jiffies);
- return;
- }
-
- printk(" do_sbpcd_request[%di](%p:%ld+%ld), Pid:%d, Time:%li\n",
- xnr, req, req->sector, req->nr_sectors, current->pid, jiffies);
-#endif
-
- req = elv_next_request(q); /* take out our request so no other */
- if (!req)
- return;
-
- if (req -> sector == -1)
- end_request(req, 0);
- spin_unlock_irq(q->queue_lock);
-
- down(&ioctl_read_sem);
- if (rq_data_dir(elv_next_request(q)) != READ)
- {
- msg(DBG_INF, "bad cmd %d\n", req->cmd[0]);
- goto err_done;
- }
- p = req->rq_disk->private_data;
-#if OLD_BUSY
- while (busy_audio) sbp_sleep(HZ); /* wait a bit */
- busy_data=1;
-#endif /* OLD_BUSY */
-
- if (p->audio_state==audio_playing) goto err_done;
- if (p != current_drive)
- switch_drive(p);
-
- block = req->sector; /* always numbered as 512-byte-pieces */
- nsect = req->nr_sectors; /* always counted as 512-byte-pieces */
-
- msg(DBG_BSZ,"read sector %d (%d sectors)\n", block, nsect);
-#if 0
- msg(DBG_MUL,"read LBA %d\n", block/4);
-#endif
-
- sbp_transfer(req);
- /* if we satisfied the request from the buffer, we're done. */
- if (req->nr_sectors == 0)
- {
-#ifdef DEBUG_GTL
- printk(" do_sbpcd_request[%do](%p:%ld+%ld) end 2, Time:%li\n",
- xnr, req, req->sector, req->nr_sectors, jiffies);
-#endif
- up(&ioctl_read_sem);
- spin_lock_irq(q->queue_lock);
- end_request(req, 1);
- goto request_loop;
- }
-
-#ifdef FUTURE
- i=prepare(0,0); /* at moment not really a hassle check, but ... */
- if (i!=0)
- msg(DBG_INF,"\"prepare\" tells error %d -- ignored\n", i);
-#endif /* FUTURE */
-
- if (!st_spinning) cc_SpinUp();
-
- for (data_tries=n_retries; data_tries > 0; data_tries--)
- {
- for (status_tries=3; status_tries > 0; status_tries--)
- {
- flags_cmd_out |= f_respo3;
- cc_ReadStatus();
- if (sbp_status() != 0) break;
- if (st_check) cc_ReadError();
- sbp_sleep(1); /* wait a bit, try again */
- }
- if (status_tries == 0)
- {
- msg(DBG_INF,"sbp_status: failed after 3 tries in line %d\n", __LINE__);
- break;
- }
-
- sbp_read_cmd(req);
- sbp_sleep(0);
- if (sbp_data(req) != 0)
- {
-#ifdef SAFE_MIXED
- current_drive->has_data=2; /* is really a data disk */
-#endif /* SAFE_MIXED */
-#ifdef DEBUG_GTL
- printk(" do_sbpcd_request[%do](%p:%ld+%ld) end 3, Time:%li\n",
- xnr, req, req->sector, req->nr_sectors, jiffies);
-#endif
- up(&ioctl_read_sem);
- spin_lock_irq(q->queue_lock);
- end_request(req, 1);
- goto request_loop;
- }
- }
-
- err_done:
-#if OLD_BUSY
- busy_data=0;
-#endif /* OLD_BUSY */
-#ifdef DEBUG_GTL
- printk(" do_sbpcd_request[%do](%p:%ld+%ld) end 4 (error), Time:%li\n",
- xnr, req, req->sector, req->nr_sectors, jiffies);
-#endif
- up(&ioctl_read_sem);
- sbp_sleep(0); /* wait a bit, try again */
- spin_lock_irq(q->queue_lock);
- end_request(req, 0);
- goto request_loop;
-}
-/*==========================================================================*/
-/*
- * build and send the READ command.
- */
-static void sbp_read_cmd(struct request *req)
-{
-#undef OLD
+ else if (fam1_drive)
+ {
+ drvcmd[0]=CMD1_READ; /* "read frames", new drives */
+ lba2msf(block,&drvcmd[1]); /* msf-bin format required */
+ drvcmd[4]=0;
+ drvcmd[5]=0;
+ drvcmd[6]=read_audio.nframes; /* # of frames */
+ }
+ else if (fam2_drive)
+ {
+ drvcmd[0]=CMD2_READ_XA2;
+ lba2msf(block,&drvcmd[1]); /* msf-bin format required */
+ drvcmd[4]=0;
+ drvcmd[5]=read_audio.nframes; /* # of frames */
+ drvcmd[6]=0x11; /* raw mode */
+ }
+ else if (famT_drive) /* CD-55A: not tested yet */
+ {
+ }
+ msg(DBG_AUD,"read_audio: before giving \"read\" command.\n");
+ flags_cmd_out=f_putcmd;
+ response_count=0;
+ i=cmd_out();
+ if (i<0) msg(DBG_INF,"error giving READ AUDIO command: %0d\n", i);
+ sbp_sleep(0);
+ msg(DBG_AUD,"read_audio: after giving \"read\" command.\n");
+ for (frame=1;frame<2 && !error_flag; frame++)
+ {
+ try=maxtim_data;
+ for (timeout=jiffies+9*HZ; ; )
+ {
+ for ( ; try!=0;try--)
+ {
+ j=inb(CDi_status);
+ if (!(j&s_not_data_ready)) break;
+ if (!(j&s_not_result_ready)) break;
+ if (fam0L_drive) if (j&s_attention) break;
+ }
+ if (try != 0 || time_after_eq(jiffies, timeout)) break;
+ if (data_retrying == 0) data_waits++;
+ data_retrying = 1;
+ sbp_sleep(1);
+ try = 1;
+ }
+ if (try==0)
+ {
+ msg(DBG_INF,"read_audio: sbp_data: CDi_status timeout.\n");
+ error_flag++;
+ break;
+ }
+ msg(DBG_AUD,"read_audio: sbp_data: CDi_status ok.\n");
+ if (j&s_not_data_ready)
+ {
+ msg(DBG_INF, "read_audio: sbp_data: DATA_READY timeout.\n");
+ error_flag++;
+ break;
+ }
+ msg(DBG_AUD,"read_audio: before reading data.\n");
+ error_flag=0;
+ p = current_drive->aud_buf;
+ if (sbpro_type==1) OUT(CDo_sel_i_d,1);
+ if (do_16bit)
+ {
+ u_short *p2 = (u_short *) p;