fedora core 6 1.2949 + vserver 2.2.0

[linux-2.6.git] / drivers / char / Kconfig

diff --git a/drivers/char/Kconfig b/drivers/char/Kconfig
index 8b72a61..20ef466 100644 (file)
--- a/drivers/char/Kconfig
+++ b/drivers/char/Kconfig
@@ -62,6 +62,23 @@ config HW_CONSOLE
        depends on VT && !S390 && !UML
        default y
 
        depends on VT && !S390 && !UML
        default y
 

+config VT_HW_CONSOLE_BINDING
+       bool "Support for binding and unbinding console drivers"
+       depends on HW_CONSOLE
+       default n
+       ---help---
+         The virtual terminal is the device that interacts with the physical
+         terminal through console drivers. On these systems, at least one
+         console driver is loaded. In other configurations, additional console
+         drivers may be enabled, such as the framebuffer console. If more than
+         1 console driver is enabled, setting this to 'y' will allow you to
+         select the console driver that will serve as the backend for the
+         virtual terminals.
+
+        See <file:Documentation/console/console.txt> for more
+        information. For framebuffer console users, please refer to
+        <file:Documentation/fb/fbcon.txt>.
+

 config SERIAL_NONSTANDARD
        bool "Non-standard serial port support"
        ---help---
 config SERIAL_NONSTANDARD
        bool "Non-standard serial port support"
        ---help---


@@ -80,7 +97,7 @@ config SERIAL_NONSTANDARD
 
 config COMPUTONE
        tristate "Computone IntelliPort Plus serial support"
 
 config COMPUTONE
        tristate "Computone IntelliPort Plus serial support"

-       depends on SERIAL_NONSTANDARD
+       depends on SERIAL_NONSTANDARD && (ISA || EISA || PCI)

        ---help---
          This driver supports the entire family of Intelliport II/Plus
          controllers with the exception of the MicroChannel controllers and
        ---help---
          This driver supports the entire family of Intelliport II/Plus
          controllers with the exception of the MicroChannel controllers and


@@ -184,9 +201,24 @@ config MOXA_SMARTIO
          The module will be called mxser. If you want to do that, say M
          here.
 
          The module will be called mxser. If you want to do that, say M
          here.
 

+config MOXA_SMARTIO_NEW
+       tristate "Moxa SmartIO support v. 2.0 (EXPERIMENTAL)"
+       depends on SERIAL_NONSTANDARD && (PCI || EISA || ISA)
+       help
+         Say Y here if you have a Moxa SmartIO multiport serial card and/or
+         want to help develop a new version of this driver.
+
+         This is upgraded (1.9.1) driver from original Moxa drivers with
+         changes finally resulting in PCI probing.
+
+         Use at your own risk.
+
+         This driver can also be built as a module. The module will be called
+         mxser_new. If you want to do that, say M here.
+

 config ISI
        tristate "Multi-Tech multiport card support (EXPERIMENTAL)"
 config ISI
        tristate "Multi-Tech multiport card support (EXPERIMENTAL)"

-       depends on SERIAL_NONSTANDARD
+       depends on SERIAL_NONSTANDARD && PCI

        select FW_LOADER
        help
          This is a driver for the Multi-Tech cards which provide several
        select FW_LOADER
        help
          This is a driver for the Multi-Tech cards which provide several


@@ -280,7 +312,7 @@ config SPECIALIX_RTSCTS
 
 config SX
        tristate "Specialix SX (and SI) card support"
 
 config SX
        tristate "Specialix SX (and SI) card support"

-       depends on SERIAL_NONSTANDARD
+       depends on SERIAL_NONSTANDARD && (PCI || EISA || ISA)

        help
          This is a driver for the SX and SI multiport serial cards.
          Please read the file <file:Documentation/sx.txt> for details.
        help
          This is a driver for the SX and SI multiport serial cards.
          Please read the file <file:Documentation/sx.txt> for details.


@@ -291,7 +323,7 @@ config SX
 
 config RIO
        tristate "Specialix RIO system support"
 
 config RIO
        tristate "Specialix RIO system support"

-       depends on SERIAL_NONSTANDARD && BROKEN_ON_SMP && !64BIT
+       depends on SERIAL_NONSTANDARD

        help
          This is a driver for the Specialix RIO, a smart serial card which
          drives an outboard box that can support up to 128 ports.  Product
        help
          This is a driver for the Specialix RIO, a smart serial card which
          drives an outboard box that can support up to 128 ports.  Product


@@ -354,36 +386,6 @@ config AU1000_SERIAL_CONSOLE
          If you have an Alchemy AU1000 processor (MIPS based) and you want
          to use a console on a serial port, say Y.  Otherwise, say N.
 
          If you have an Alchemy AU1000 processor (MIPS based) and you want
          to use a console on a serial port, say Y.  Otherwise, say N.
 

-config QTRONIX_KEYBOARD
-       bool "Enable Qtronix 990P Keyboard Support"
-       depends on IT8712
-       help
-         Images of Qtronix keyboards are at
-         <http://www.qtronix.com/keyboard.html>.
-
-config IT8172_CIR
-       bool
-       depends on QTRONIX_KEYBOARD
-       default y
-
-config IT8172_SCR0
-       bool "Enable Smart Card Reader 0 Support "
-       depends on IT8712
-       help
-         Say Y here to support smart-card reader 0 (SCR0) on the Integrated
-         Technology Express, Inc. ITE8172 SBC.  Vendor page at
-         <http://www.ite.com.tw/ia/brief_it8172bsp.htm>; picture of the
-         board at <http://www.mvista.com/partners/semiconductor/ite.html>.
-
-config IT8172_SCR1
-       bool "Enable Smart Card Reader 1 Support "
-       depends on IT8712
-       help
-         Say Y here to support smart-card reader 1 (SCR1) on the Integrated
-         Technology Express, Inc. ITE8172 SBC.  Vendor page at
-         <http://www.ite.com.tw/ia/brief_it8172bsp.htm>; picture of the
-         board at <http://www.mvista.com/partners/semiconductor/ite.html>.
-

 config A2232
        tristate "Commodore A2232 serial support (EXPERIMENTAL)"
        depends on EXPERIMENTAL && ZORRO && BROKEN_ON_SMP
 config A2232
        tristate "Commodore A2232 serial support (EXPERIMENTAL)"
        depends on EXPERIMENTAL && ZORRO && BROKEN_ON_SMP


@@ -464,6 +466,8 @@ config LEGACY_PTYS
          security.  This option enables these legacy devices; on most
          systems, it is safe to say N.
 
          security.  This option enables these legacy devices; on most
          systems, it is safe to say N.
 

+config CRASH
+        tristate "Crash Utility memory driver"

 
 config LEGACY_PTY_COUNT
        int "Maximum number of legacy PTY in use"
 
 config LEGACY_PTY_COUNT
        int "Maximum number of legacy PTY in use"


@@ -478,6 +482,21 @@ config LEGACY_PTY_COUNT
          When not in use, each legacy PTY occupies 12 bytes on 32-bit
          architectures and 24 bytes on 64-bit architectures.
 
          When not in use, each legacy PTY occupies 12 bytes on 32-bit
          architectures and 24 bytes on 64-bit architectures.
 

+config BRIQ_PANEL
+       tristate 'Total Impact briQ front panel driver'
+       depends on PPC_CHRP
+       ---help---
+         The briQ is a small footprint CHRP computer with a frontpanel VFD, a
+         tristate led and two switches. It is the size of a CDROM drive.
+
+         If you have such one and want anything showing on the VFD then you
+         must answer Y here.
+
+         To compile this driver as a module, choose M here: the
+         module will be called briq_panel.
+
+         It's safe to say N here.
+

 config PRINTER
        tristate "Parallel printer support"
        depends on PARPORT
 config PRINTER
        tristate "Parallel printer support"
        depends on PARPORT


@@ -561,14 +580,38 @@ config TIPAR
 
          If unsure, say N.
 
 
          If unsure, say N.
 

+config HVC_DRIVER
+       bool
+       help
+         Users of pSeries machines that want to utilize the hvc console front-end
+         module for their backend console driver should select this option.
+         It will automatically be selected if one of the back-end console drivers
+         is selected.
+
+

 config HVC_CONSOLE
        bool "pSeries Hypervisor Virtual Console support"
        depends on PPC_PSERIES
 config HVC_CONSOLE
        bool "pSeries Hypervisor Virtual Console support"
        depends on PPC_PSERIES

+       select HVC_DRIVER

        help
          pSeries machines when partitioned support a hypervisor virtual
          console. This driver allows each pSeries partition to have a console
          which is accessed via the HMC.
 
        help
          pSeries machines when partitioned support a hypervisor virtual
          console. This driver allows each pSeries partition to have a console
          which is accessed via the HMC.
 

+config HVC_ISERIES
+       bool "iSeries Hypervisor Virtual Console support"
+       depends on PPC_ISERIES && !VIOCONS
+       select HVC_DRIVER
+       help
+         iSeries machines support a hypervisor virtual console.
+
+config HVC_RTAS
+       bool "IBM RTAS Console support"
+       depends on PPC_RTAS
+       select HVC_DRIVER
+       help
+         IBM Console device driver which makes use of RTAS
+

 config HVCS
        tristate "IBM Hypervisor Virtual Console Server support"
        depends on PPC_PSERIES
 config HVCS
        tristate "IBM Hypervisor Virtual Console Server support"
        depends on PPC_PSERIES


@@ -653,20 +696,7 @@ config NWFLASH
 
          If you're not sure, say N.
 
 
          If you're not sure, say N.
 

-config HW_RANDOM
-       tristate "Intel/AMD/VIA HW Random Number Generator support"
-       depends on (X86 || IA64) && PCI
-       ---help---
-         This driver provides kernel-side support for the Random Number
-         Generator hardware found on Intel i8xx-based motherboards,
-         AMD 76x-based motherboards, and Via Nehemiah CPUs.
-
-         Provides a character driver, used to read() entropy data.
-
-         To compile this driver as a module, choose M here: the
-         module will be called hw_random.
-
-         If unsure, say N.
+source "drivers/char/hw_random/Kconfig"

 
 config NVRAM
        tristate "/dev/nvram support"
 
 config NVRAM
        tristate "/dev/nvram support"


@@ -696,7 +726,7 @@ config NVRAM
 
 config RTC
        tristate "Enhanced Real Time Clock Support"
 
 config RTC
        tristate "Enhanced Real Time Clock Support"

-       depends on !PPC32 && !PARISC && !IA64 && !M68K && (!SPARC || PCI) && !FRV
+       depends on !PPC && !PARISC && !IA64 && !M68K && (!SPARC || PCI) && !FRV && !ARM && !SUPERH

        ---help---
          If you say Y here and create a character special file /dev/rtc with
          major number 10 and minor number 135 using mknod ("man mknod"), you
        ---help---
          If you say Y here and create a character special file /dev/rtc with
          major number 10 and minor number 135 using mknod ("man mknod"), you


@@ -780,18 +810,6 @@ config DS1302
          will get access to the real time clock (or hardware clock) built
          into your computer.
 
          will get access to the real time clock (or hardware clock) built
          into your computer.
 

-config S3C2410_RTC
-       bool "S3C2410 RTC Driver"
-       depends on ARCH_S3C2410
-       help
-         RTC (Realtime Clock) driver for the clock inbuilt into the
-         Samsung S3C2410. This can provide periodic interrupt rates
-         from 1Hz to 64Hz for user programs, and wakeup from Alarm.
-
-config RTC_VR41XX
-       tristate "NEC VR4100 series Real Time Clock Support"
-       depends on CPU_VR41XX
-

 config COBALT_LCD
        bool "Support for Cobalt LCD"
        depends on MIPS_COBALT
 config COBALT_LCD
        bool "Support for Cobalt LCD"
        depends on MIPS_COBALT


@@ -851,40 +869,8 @@ config SONYPI
 
 config TANBAC_TB0219
        tristate "TANBAC TB0219 base board support"
 
 config TANBAC_TB0219
        tristate "TANBAC TB0219 base board support"

-       depends TANBAC_TB022X
-
-menu "Ftape, the floppy tape device driver"
-
-config FTAPE
-       tristate "Ftape (QIC-80/Travan) support"
-       depends on BROKEN_ON_SMP && (ALPHA || X86)
-       ---help---
-         If you have a tape drive that is connected to your floppy
-         controller, say Y here.
-
-         Some tape drives (like the Seagate "Tape Store 3200" or the Iomega
-         "Ditto 3200" or the Exabyte "Eagle TR-3") come with a "high speed"
-         controller of their own. These drives (and their companion
-         controllers) are also supported if you say Y here.
-
-         If you have a special controller (such as the CMS FC-10, FC-20,
-         Mountain Mach-II, or any controller that is based on the Intel 82078
-         FDC like the high speed controllers by Seagate and Exabyte and
-         Iomega's "Ditto Dash") you must configure it by selecting the
-         appropriate entries from the "Floppy tape controllers" sub-menu
-         below and possibly modify the default values for the IRQ and DMA
-         channel and the IO base in ftape's configuration menu.
-
-         If you want to use your floppy tape drive on a PCI-bus based system,
-         please read the file <file:drivers/char/ftape/README.PCI>.
-
-         The ftape kernel driver is also available as a runtime loadable
-         module. To compile this driver as a module, choose M here: the
-         module will be called ftape.
-
-source "drivers/char/ftape/Kconfig"
-
-endmenu
+       depends on TANBAC_TB022X
+       select GPIO_VR41XX

 
 source "drivers/char/agp/Kconfig"
 
 
 source "drivers/char/agp/Kconfig"
 


@@ -921,12 +907,36 @@ config MWAVE
 config SCx200_GPIO
        tristate "NatSemi SCx200 GPIO Support"
        depends on SCx200
 config SCx200_GPIO
        tristate "NatSemi SCx200 GPIO Support"
        depends on SCx200

+       select NSC_GPIO

        help
          Give userspace access to the GPIO pins on the National
          Semiconductor SCx200 processors.
 
          If compiled as a module, it will be called scx200_gpio.
 
        help
          Give userspace access to the GPIO pins on the National
          Semiconductor SCx200 processors.
 
          If compiled as a module, it will be called scx200_gpio.
 

+config PC8736x_GPIO
+       tristate "NatSemi PC8736x GPIO Support"
+       depends on X86
+       default SCx200_GPIO     # mostly N
+       select NSC_GPIO         # needed for support routines
+       help
+         Give userspace access to the GPIO pins on the National
+         Semiconductor PC-8736x (x=[03456]) SuperIO chip.  The chip
+         has multiple functional units, inc several managed by
+         hwmon/pc87360 driver.  Tested with PC-87366
+
+         If compiled as a module, it will be called pc8736x_gpio.
+
+config NSC_GPIO
+       tristate "NatSemi Base GPIO Support"
+       depends on X86_32
+       # selected by SCx200_GPIO and PC8736x_GPIO
+       # what about 2 selectors differing: m != y
+       help
+         Common support used (and needed) by scx200_gpio and
+         pc8736x_gpio drivers.  If those drivers are built as
+         modules, this one will be too, named nsc_gpio
+

 config CS5535_GPIO
        tristate "AMD CS5535/CS5536 GPIO (Geode Companion Device)"
        depends on X86_32
 config CS5535_GPIO
        tristate "AMD CS5535/CS5536 GPIO (Geode Companion Device)"
        depends on X86_32


@@ -942,6 +952,7 @@ config GPIO_VR41XX
 
 config RAW_DRIVER
        tristate "RAW driver (/dev/raw/rawN) (OBSOLETE)"
 
 config RAW_DRIVER
        tristate "RAW driver (/dev/raw/rawN) (OBSOLETE)"

+       depends on BLOCK

        help
          The raw driver permits block devices to be bound to /dev/raw/rawN. 
          Once bound, I/O against /dev/raw/rawN uses efficient zero-copy I/O. 
        help
          The raw driver permits block devices to be bound to /dev/raw/rawN. 
          Once bound, I/O against /dev/raw/rawN uses efficient zero-copy I/O. 


@@ -967,7 +978,7 @@ config HPET
        help
          If you say Y here, you will have a miscdevice named "/dev/hpet/".  Each
          open selects one of the timers supported by the HPET.  The timers are
        help
          If you say Y here, you will have a miscdevice named "/dev/hpet/".  Each
          open selects one of the timers supported by the HPET.  The timers are

-         non-periodioc and/or periodic.
+         non-periodic and/or periodic.

 
 config HPET_RTC_IRQ
        bool "HPET Control RTC IRQ" if !HPET_EMULATE_RTC
 
 config HPET_RTC_IRQ
        bool "HPET Control RTC IRQ" if !HPET_EMULATE_RTC


@@ -1011,7 +1022,7 @@ source "drivers/char/tpm/Kconfig"
 
 config TELCLOCK
        tristate "Telecom clock driver for MPBL0010 ATCA SBC"
 
 config TELCLOCK
        tristate "Telecom clock driver for MPBL0010 ATCA SBC"

-       depends on EXPERIMENTAL
+       depends on EXPERIMENTAL && X86

        default n
        help
          The telecom clock device is specific to the MPBL0010 ATCA computer and
        default n
        help
          The telecom clock device is specific to the MPBL0010 ATCA computer and