-#undef DEBUG_AEC_REGS
-
-static int aec62xx_get_info (char *buffer, char **addr, off_t offset, int count)
-{
- char *p = buffer;
- char *chipset_nums[] = {"error", "error", "error", "error",
- "error", "error", "850UF", "860",
- "860R", "865", "865R", "error" };
- int len;
- int i;
-
- for (i = 0; i < n_aec_devs; i++) {
- struct pci_dev *dev = aec_devs[i];
- unsigned long iobase = pci_resource_start(dev, 4);
- u8 c0 = 0, c1 = 0, art = 0;
-#ifdef DEBUG_AEC_REGS
- u8 uart = 0;
-#endif /* DEBUG_AEC_REGS */
-
- c0 = inb(iobase + 0x02);
- c1 = inb(iobase + 0x0a);
-
- p += sprintf(p, "\nController: %d\n", i);
- p += sprintf(p, "Chipset: AEC%s\n", chipset_nums[dev->device]);
-
- p += sprintf(p, "--------------- Primary Channel "
- "---------------- Secondary Channel "
- "-------------\n");
- (void) pci_read_config_byte(dev, 0x4a, &art);
- p += sprintf(p, " %sabled ",
- (art&0x02)?" en":"dis");
- p += sprintf(p, " %sabled\n",
- (art&0x04)?" en":"dis");
- p += sprintf(p, "--------------- drive0 --------- drive1 "
- "-------- drive0 ---------- drive1 ------\n");
- p += sprintf(p, "DMA enabled: %s %s ",
- (c0&0x20)?"yes":"no ",(c0&0x40)?"yes":"no ");
- p += sprintf(p, " %s %s\n",
- (c1&0x20)?"yes":"no ",(c1&0x40)?"yes":"no ");
-
- if (dev->device == PCI_DEVICE_ID_ARTOP_ATP850UF) {
- (void) pci_read_config_byte(dev, 0x54, &art);
- p += sprintf(p, "DMA Mode: %s(%s)",
- (c0&0x20)?((art&0x03)?"UDMA":" DMA"):" PIO",
- (art&0x02)?"2":(art&0x01)?"1":"0");
- p += sprintf(p, " %s(%s)",
- (c0&0x40)?((art&0x0c)?"UDMA":" DMA"):" PIO",
- (art&0x08)?"2":(art&0x04)?"1":"0");
- p += sprintf(p, " %s(%s)",
- (c1&0x20)?((art&0x30)?"UDMA":" DMA"):" PIO",
- (art&0x20)?"2":(art&0x10)?"1":"0");
- p += sprintf(p, " %s(%s)\n",
- (c1&0x40)?((art&0xc0)?"UDMA":" DMA"):" PIO",
- (art&0x80)?"2":(art&0x40)?"1":"0");
-#ifdef DEBUG_AEC_REGS
- (void) pci_read_config_byte(dev, 0x40, &art);
- p += sprintf(p, "Active: 0x%02x", art);
- (void) pci_read_config_byte(dev, 0x42, &art);
- p += sprintf(p, " 0x%02x", art);
- (void) pci_read_config_byte(dev, 0x44, &art);
- p += sprintf(p, " 0x%02x", art);
- (void) pci_read_config_byte(dev, 0x46, &art);
- p += sprintf(p, " 0x%02x\n", art);
- (void) pci_read_config_byte(dev, 0x41, &art);
- p += sprintf(p, "Recovery: 0x%02x", art);
- (void) pci_read_config_byte(dev, 0x43, &art);
- p += sprintf(p, " 0x%02x", art);
- (void) pci_read_config_byte(dev, 0x45, &art);
- p += sprintf(p, " 0x%02x", art);
- (void) pci_read_config_byte(dev, 0x47, &art);
- p += sprintf(p, " 0x%02x\n", art);
-#endif /* DEBUG_AEC_REGS */
- } else {
- /*
- * case PCI_DEVICE_ID_ARTOP_ATP860:
- * case PCI_DEVICE_ID_ARTOP_ATP860R:
- * case PCI_DEVICE_ID_ARTOP_ATP865:
- * case PCI_DEVICE_ID_ARTOP_ATP865R:
- */
- (void) pci_read_config_byte(dev, 0x44, &art);
- p += sprintf(p, "DMA Mode: %s(%s)",
- (c0&0x20)?((art&0x07)?"UDMA":" DMA"):" PIO",
- ((art&0x07)==0x07)?"6":
- ((art&0x06)==0x06)?"5":
- ((art&0x05)==0x05)?"4":
- ((art&0x04)==0x04)?"3":
- ((art&0x03)==0x03)?"2":
- ((art&0x02)==0x02)?"1":
- ((art&0x01)==0x01)?"0":"?");
- p += sprintf(p, " %s(%s)",
- (c0&0x40)?((art&0x70)?"UDMA":" DMA"):" PIO",
- ((art&0x70)==0x70)?"6":
- ((art&0x60)==0x60)?"5":
- ((art&0x50)==0x50)?"4":
- ((art&0x40)==0x40)?"3":
- ((art&0x30)==0x30)?"2":
- ((art&0x20)==0x20)?"1":
- ((art&0x10)==0x10)?"0":"?");
- (void) pci_read_config_byte(dev, 0x45, &art);
- p += sprintf(p, " %s(%s)",
- (c1&0x20)?((art&0x07)?"UDMA":" DMA"):" PIO",
- ((art&0x07)==0x07)?"6":
- ((art&0x06)==0x06)?"5":
- ((art&0x05)==0x05)?"4":
- ((art&0x04)==0x04)?"3":
- ((art&0x03)==0x03)?"2":
- ((art&0x02)==0x02)?"1":
- ((art&0x01)==0x01)?"0":"?");
- p += sprintf(p, " %s(%s)\n",
- (c1&0x40)?((art&0x70)?"UDMA":" DMA"):" PIO",
- ((art&0x70)==0x70)?"6":
- ((art&0x60)==0x60)?"5":
- ((art&0x50)==0x50)?"4":
- ((art&0x40)==0x40)?"3":
- ((art&0x30)==0x30)?"2":
- ((art&0x20)==0x20)?"1":
- ((art&0x10)==0x10)?"0":"?");
-#ifdef DEBUG_AEC_REGS
- (void) pci_read_config_byte(dev, 0x40, &art);
- p += sprintf(p, "Active: 0x%02x", HIGH_4(art));
- (void) pci_read_config_byte(dev, 0x41, &art);
- p += sprintf(p, " 0x%02x", HIGH_4(art));
- (void) pci_read_config_byte(dev, 0x42, &art);
- p += sprintf(p, " 0x%02x", HIGH_4(art));
- (void) pci_read_config_byte(dev, 0x43, &art);
- p += sprintf(p, " 0x%02x\n", HIGH_4(art));
- (void) pci_read_config_byte(dev, 0x40, &art);
- p += sprintf(p, "Recovery: 0x%02x", LOW_4(art));
- (void) pci_read_config_byte(dev, 0x41, &art);
- p += sprintf(p, " 0x%02x", LOW_4(art));
- (void) pci_read_config_byte(dev, 0x42, &art);
- p += sprintf(p, " 0x%02x", LOW_4(art));
- (void) pci_read_config_byte(dev, 0x43, &art);
- p += sprintf(p, " 0x%02x\n", LOW_4(art));
- (void) pci_read_config_byte(dev, 0x49, &uart);
- p += sprintf(p, "reg49h = 0x%02x ", uart);
- (void) pci_read_config_byte(dev, 0x4a, &uart);
- p += sprintf(p, "reg4ah = 0x%02x\n", uart);
-#endif /* DEBUG_AEC_REGS */
- }
- }
- /* p - buffer must be less than 4k! */
- len = (p - buffer) - offset;
- *addr = buffer + offset;
-
- return len > count ? count : len;
-}
-#endif /* defined(DISPLAY_AEC62xx_TIMINGS) && defined(CONFIG_PROC_FS) */