-#ifdef CONFIG_IEEE1394_PCILYNX_PORTS
-/* VFS functions for local bus / aux device access. Access to those
- * is implemented as a character device instead of block devices
- * because buffers are not wanted for this. Therefore llseek (from
- * VFS) can be used for these char devices with obvious effects.
- */
-static int mem_open(struct inode*, struct file*);
-static int mem_release(struct inode*, struct file*);
-static unsigned int aux_poll(struct file*, struct poll_table_struct*);
-static loff_t mem_llseek(struct file*, loff_t, int);
-static ssize_t mem_read (struct file*, char*, size_t, loff_t*);
-static ssize_t mem_write(struct file*, const char*, size_t, loff_t*);
-
-
-static struct file_operations aux_ops = {
- .owner = THIS_MODULE,
- .read = mem_read,
- .write = mem_write,
- .poll = aux_poll,
- .llseek = mem_llseek,
- .open = mem_open,
- .release = mem_release,
-};
-
-
-static void aux_setup_pcls(struct ti_lynx *lynx)
-{
- struct ti_pcl pcl;
-
- pcl.next = PCL_NEXT_INVALID;
- pcl.user_data = pcl_bus(lynx, lynx->dmem_pcl);
- put_pcl(lynx, lynx->dmem_pcl, &pcl);
-}
-
-static int mem_open(struct inode *inode, struct file *file)
-{
- int cid = iminor(inode);
- enum { t_rom, t_aux, t_ram } type;
- struct memdata *md;
-
- if (cid < PCILYNX_MINOR_AUX_START) {
- /* just for completeness */
- return -ENXIO;
- } else if (cid < PCILYNX_MINOR_ROM_START) {
- cid -= PCILYNX_MINOR_AUX_START;
- if (cid >= num_of_cards || !cards[cid].aux_port)
- return -ENXIO;
- type = t_aux;
- } else if (cid < PCILYNX_MINOR_RAM_START) {
- cid -= PCILYNX_MINOR_ROM_START;
- if (cid >= num_of_cards || !cards[cid].local_rom)
- return -ENXIO;
- type = t_rom;
- } else {
- /* WARNING: Know what you are doing when opening RAM.
- * It is currently used inside the driver! */
- cid -= PCILYNX_MINOR_RAM_START;
- if (cid >= num_of_cards || !cards[cid].local_ram)
- return -ENXIO;
- type = t_ram;
- }
-
- md = (struct memdata *)kmalloc(sizeof(struct memdata), SLAB_KERNEL);
- if (md == NULL)
- return -ENOMEM;
-
- md->lynx = &cards[cid];
- md->cid = cid;
-
- switch (type) {
- case t_rom:
- md->type = rom;
- break;
- case t_ram:
- md->type = ram;
- break;
- case t_aux:
- atomic_set(&md->aux_intr_last_seen,
- atomic_read(&cards[cid].aux_intr_seen));
- md->type = aux;
- break;
- }
-
- file->private_data = md;
-
- return 0;
-}
-
-static int mem_release(struct inode *inode, struct file *file)
-{
- kfree(file->private_data);
- return 0;
-}
-
-static unsigned int aux_poll(struct file *file, poll_table *pt)
-{
- struct memdata *md = (struct memdata *)file->private_data;
- int cid = md->cid;
- unsigned int mask;
-
- /* reading and writing is always allowed */
- mask = POLLIN | POLLRDNORM | POLLOUT | POLLWRNORM;
-
- if (md->type == aux) {
- poll_wait(file, &cards[cid].aux_intr_wait, pt);
-
- if (atomic_read(&md->aux_intr_last_seen)
- != atomic_read(&cards[cid].aux_intr_seen)) {
- mask |= POLLPRI;
- atomic_inc(&md->aux_intr_last_seen);
- }
- }
-
- return mask;
-}
-
-loff_t mem_llseek(struct file *file, loff_t offs, int orig)
-{
- loff_t newoffs;
-
- switch (orig) {
- case 0:
- newoffs = offs;
- break;
- case 1:
- newoffs = offs + file->f_pos;
- break;
- case 2:
- newoffs = PCILYNX_MAX_MEMORY + 1 + offs;
- break;
- default:
- return -EINVAL;
- }
-
- if (newoffs < 0 || newoffs > PCILYNX_MAX_MEMORY + 1) return -EINVAL;
-
- file->f_pos = newoffs;
- return newoffs;
-}
-
-/*
- * do not DMA if count is too small because this will have a serious impact
- * on performance - the value 2400 was found by experiment and may not work
- * everywhere as good as here - use mem_mindma option for modules to change
- */
-static short mem_mindma = 2400;
-module_param(mem_mindma, short, 0444);
-MODULE_PARM_DESC(mem_mindma, "Minimum amount of data required to use DMA");
-
-static ssize_t mem_dmaread(struct memdata *md, u32 physbuf, ssize_t count,
- int offset)
-{
- pcltmp_t pcltmp;
- struct ti_pcl *pcl;
- size_t retval;
- int i;
- DECLARE_WAITQUEUE(wait, current);
-
- count &= ~3;
- count = min(count, 53196);
- retval = count;
-
- if (reg_read(md->lynx, DMA_CHAN_CTRL(CHANNEL_LOCALBUS))
- & DMA_CHAN_CTRL_BUSY) {
- PRINT(KERN_WARNING, md->lynx->id, "DMA ALREADY ACTIVE!");
- }
-
- reg_write(md->lynx, LBUS_ADDR, md->type | offset);
-
- pcl = edit_pcl(md->lynx, md->lynx->dmem_pcl, &pcltmp);
- pcl->buffer[0].control = PCL_CMD_LBUS_TO_PCI | min(count, 4092);
- pcl->buffer[0].pointer = physbuf;
- count -= 4092;
-
- i = 0;
- while (count > 0) {
- i++;
- pcl->buffer[i].control = min(count, 4092);
- pcl->buffer[i].pointer = physbuf + i * 4092;
- count -= 4092;
- }
- pcl->buffer[i].control |= PCL_LAST_BUFF;
- commit_pcl(md->lynx, md->lynx->dmem_pcl, &pcltmp);
-
- set_current_state(TASK_INTERRUPTIBLE);
- add_wait_queue(&md->lynx->mem_dma_intr_wait, &wait);
- run_sub_pcl(md->lynx, md->lynx->dmem_pcl, 2, CHANNEL_LOCALBUS);
-
- schedule();
- while (reg_read(md->lynx, DMA_CHAN_CTRL(CHANNEL_LOCALBUS))
- & DMA_CHAN_CTRL_BUSY) {
- if (signal_pending(current)) {
- retval = -EINTR;
- break;
- }
- schedule();
- }
-
- reg_write(md->lynx, DMA_CHAN_CTRL(CHANNEL_LOCALBUS), 0);
- remove_wait_queue(&md->lynx->mem_dma_intr_wait, &wait);
-
- if (reg_read(md->lynx, DMA_CHAN_CTRL(CHANNEL_LOCALBUS))
- & DMA_CHAN_CTRL_BUSY) {
- PRINT(KERN_ERR, md->lynx->id, "DMA STILL ACTIVE!");
- }
-
- return retval;
-}
-
-static ssize_t mem_read(struct file *file, char *buffer, size_t count,
- loff_t *offset)
-{
- struct memdata *md = (struct memdata *)file->private_data;
- ssize_t bcount;
- size_t alignfix;
- loff_t off = *offset; /* avoid useless 64bit-arithmetic */
- ssize_t retval;
- void *membase;
-
- if ((off + count) > PCILYNX_MAX_MEMORY+1) {
- count = PCILYNX_MAX_MEMORY+1 - off;
- }
- if (count == 0 || off > PCILYNX_MAX_MEMORY) {
- return -ENOSPC;
- }
-
- switch (md->type) {
- case rom:
- membase = md->lynx->local_rom;
- break;
- case ram:
- membase = md->lynx->local_ram;
- break;
- case aux:
- membase = md->lynx->aux_port;
- break;
- default:
- panic("pcilynx%d: unsupported md->type %d in %s",
- md->lynx->id, md->type, __FUNCTION__);
- }
-
- down(&md->lynx->mem_dma_mutex);
-
- if (count < mem_mindma) {
- memcpy_fromio(md->lynx->mem_dma_buffer, membase+off, count);
- goto out;
- }
-
- bcount = count;
- alignfix = 4 - (off % 4);
- if (alignfix != 4) {
- if (bcount < alignfix) {
- alignfix = bcount;
- }
- memcpy_fromio(md->lynx->mem_dma_buffer, membase+off,
- alignfix);
- if (bcount == alignfix) {
- goto out;
- }
- bcount -= alignfix;
- off += alignfix;
- }
-
- while (bcount >= 4) {
- retval = mem_dmaread(md, md->lynx->mem_dma_buffer_dma
- + count - bcount, bcount, off);
- if (retval < 0) return retval;
-
- bcount -= retval;
- off += retval;
- }
-
- if (bcount) {
- memcpy_fromio(md->lynx->mem_dma_buffer + count - bcount,
- membase+off, bcount);
- }
-
- out:
- retval = copy_to_user(buffer, md->lynx->mem_dma_buffer, count);
- up(&md->lynx->mem_dma_mutex);
-
- if (retval) return -EFAULT;
- *offset += count;
- return count;
-}
-
-
-static ssize_t mem_write(struct file *file, const char *buffer, size_t count,
- loff_t *offset)
-{
- struct memdata *md = (struct memdata *)file->private_data;
-
- if (((*offset) + count) > PCILYNX_MAX_MEMORY+1) {
- count = PCILYNX_MAX_MEMORY+1 - *offset;
- }
- if (count == 0 || *offset > PCILYNX_MAX_MEMORY) {
- return -ENOSPC;
- }
-
- /* FIXME: dereferencing pointers to PCI mem doesn't work everywhere */
- switch (md->type) {
- case aux:
- if (copy_from_user(md->lynx->aux_port+(*offset), buffer, count))
- return -EFAULT;
- break;
- case ram:
- if (copy_from_user(md->lynx->local_ram+(*offset), buffer, count))
- return -EFAULT;
- break;
- case rom:
- /* the ROM may be writeable */
- if (copy_from_user(md->lynx->local_rom+(*offset), buffer, count))
- return -EFAULT;
- break;
- }
-
- file->f_pos += count;
- return count;
-}
-#endif /* CONFIG_IEEE1394_PCILYNX_PORTS */
-