+ u32 freq = params->frequency;
+
+ int i, a, n, pump;
+ u32 band, pll;
+
+
+ u32 osci[]={950000,1019000,1075000,1178000,1296000,1432000,
+ 1576000,1718000,1856000,2036000,2150000};
+ u32 bandsel[]={0,0x00020000,0x00040000,0x00100800,0x00101000,
+ 0x00102000,0x00104000,0x00108000,0x00110000,
+ 0x00120000,0x00140000};
+
+#define XTAL 1011100 /* Hz, really 1.0111 MHz and a /10 prescaler */
+ printk("cx24108 debug: entering SetTunerFreq, freq=%d\n",freq);
+
+ /* This is really the bit driving the tuner chip cx24108 */
+
+ if(freq<950000) freq=950000; /* kHz */
+ if(freq>2150000) freq=2150000; /* satellite IF is 950..2150MHz */
+
+ /* decide which VCO to use for the input frequency */
+ for(i=1;(i<sizeof(osci)/sizeof(osci[0]))&&(osci[i]<freq);i++);
+ printk("cx24108 debug: select vco #%d (f=%d)\n",i,freq);
+ band=bandsel[i];
+ /* the gain values must be set by SetSymbolrate */
+ /* compute the pll divider needed, from Conexant data sheet,
+ resolved for (n*32+a), remember f(vco) is f(receive) *2 or *4,
+ depending on the divider bit. It is set to /4 on the 2 lowest
+ bands */
+ n=((i<=2?2:1)*freq*10L)/(XTAL/100);
+ a=n%32; n/=32; if(a==0) n--;
+ pump=(freq<(osci[i-1]+osci[i])/2);
+ pll=0xf8000000|
+ ((pump?1:2)<<(14+11))|
+ ((n&0x1ff)<<(5+11))|
+ ((a&0x1f)<<11);
+ /* everything is shifted left 11 bits to left-align the bits in the
+ 32bit word. Output to the tuner goes MSB-aligned, after all */
+ printk("cx24108 debug: pump=%d, n=%d, a=%d\n",pump,n,a);
+ cx24110_pll_write(fe,band);
+ /* set vga and vca to their widest-band settings, as a precaution.
+ SetSymbolrate might not be called to set this up */
+ cx24110_pll_write(fe,0x500c0000);
+ cx24110_pll_write(fe,0x83f1f800);
+ cx24110_pll_write(fe,pll);
+/* writereg(client,0x56,0x7f);*/
+
+ return 0;