- Support for the Wolfson Microelectronics WM8775 high
- performance stereo A/D Converter with a 4 channel input mixer.
-
- To compile this driver as a module, choose M here: the
- module will be called wm8775.
-
-config VIDEO_WM8739
- tristate "Wolfson Microelectronics WM8739 stereo audio ADC"
- depends on VIDEO_DEV && I2C && EXPERIMENTAL
- ---help---
- Support for the Wolfson Microelectronics WM8739
- stereo A/D Converter.
-
- To compile this driver as a module, choose M here: the
- module will be called wm8739.
-
-source "drivers/media/video/cx25840/Kconfig"
-
-config VIDEO_SAA711X
- tristate "Philips SAA7113/4/5 video decoders"
- depends on VIDEO_DEV && I2C && EXPERIMENTAL
- ---help---
- Support for the Philips SAA7113/4/5 video decoders.
-
- To compile this driver as a module, choose M here: the
- module will be called saa7115.
-
-config VIDEO_SAA7127
- tristate "Philips SAA7127/9 digital video encoders"
- depends on VIDEO_V4L2 && I2C && EXPERIMENTAL
- ---help---
- Support for the Philips SAA7127/9 digital video encoders.
-
- To compile this driver as a module, choose M here: the
- module will be called saa7127.
-
-config VIDEO_UPD64031A
- tristate "NEC Electronics uPD64031A Ghost Reduction"
- depends on VIDEO_V4L2 && I2C && EXPERIMENTAL
- ---help---
- Support for the NEC Electronics uPD64031A Ghost Reduction
- video chip. It is most often found in NTSC TV cards made for
- Japan and is used to reduce the 'ghosting' effect that can
- be present in analog TV broadcasts.
-
- To compile this driver as a module, choose M here: the
- module will be called upd64031a.
-
-config VIDEO_UPD64083
- tristate "NEC Electronics uPD64083 3-Dimensional Y/C separation"
- depends on VIDEO_V4L2 && I2C && EXPERIMENTAL
- ---help---
- Support for the NEC Electronics uPD64083 3-Dimensional Y/C
- separation video chip. It is used to improve the quality of
- the colors of a composite signal.
-
- To compile this driver as a module, choose M here: the
- module will be called upd64083.
-
-endmenu # encoder / decoder chips
-
-#
-# USB Multimedia device configuration
-#
-
-menu "V4L USB devices"
- depends on USB && VIDEO_DEV
-
-source "drivers/media/video/em28xx/Kconfig"
-
-config USB_DSBR
- tristate "D-Link USB FM radio support (EXPERIMENTAL)"
- depends on USB && VIDEO_V4L1 && EXPERIMENTAL
- ---help---
- Say Y here if you want to connect this type of radio to your
- computer's USB port. Note that the audio is not digital, and
- you must connect the line out connector to a sound card or a
- set of speakers.
-
- To compile this driver as a module, choose M here: the
- module will be called dsbr100.
-
-source "drivers/media/video/usbvideo/Kconfig"
-
-source "drivers/media/video/et61x251/Kconfig"
-
-config USB_OV511
- tristate "USB OV511 Camera support"
- depends on USB && VIDEO_V4L1
- ---help---
- Say Y here if you want to connect this type of camera to your
- computer's USB port. See <file:Documentation/video4linux/ov511.txt>
- for more information and for a list of supported cameras.
-
- To compile this driver as a module, choose M here: the
- module will be called ov511.
-
-config USB_SE401
- tristate "USB SE401 Camera support"
- depends on USB && VIDEO_V4L1
- ---help---
- Say Y here if you want to connect this type of camera to your
- computer's USB port. See <file:Documentation/video4linux/se401.txt>
- for more information and for a list of supported cameras.
-
- To compile this driver as a module, choose M here: the
- module will be called se401.
-
-source "drivers/media/video/sn9c102/Kconfig"
-
-config USB_STV680
- tristate "USB STV680 (Pencam) Camera support"
- depends on USB && VIDEO_V4L1
- ---help---
- Say Y here if you want to connect this type of camera to your
- computer's USB port. This includes the Pencam line of cameras.
- See <file:Documentation/video4linux/stv680.txt> for more information
- and for a list of supported cameras.
-
- To compile this driver as a module, choose M here: the
- module will be called stv680.
-
-config USB_W9968CF
- tristate "USB W996[87]CF JPEG Dual Mode Camera support"
- depends on USB && VIDEO_V4L1 && I2C
- select VIDEO_OVCAMCHIP
- ---help---
- Say Y here if you want support for cameras based on OV681 or
- Winbond W9967CF/W9968CF JPEG USB Dual Mode Camera Chips.
-
- This driver has an optional plugin, which is distributed as a
- separate module only (released under GPL). It allows to use higher
- resolutions and framerates, but cannot be included in the official
- Linux kernel for performance purposes.
-
- See <file:Documentation/video4linux/w9968cf.txt> for more info.
-
- To compile this driver as a module, choose M here: the
- module will be called w9968cf.
-
-source "drivers/media/video/zc0301/Kconfig"
-
-source "drivers/media/video/pwc/Kconfig"
-
-endmenu # V4L USB devices