fedora core 6 1.2949 + vserver 2.2.0

[linux-2.6.git] / drivers / spi / Kconfig

diff --git a/drivers/spi/Kconfig b/drivers/spi/Kconfig
index 7a75fae..d895a1a 100644 (file)
--- a/drivers/spi/Kconfig
+++ b/drivers/spi/Kconfig
@@ -16,7 +16,7 @@ config SPI
          controller and a chipselect.  Most SPI slaves don't support
          dynamic device discovery; some are even write-only or read-only.
 
          controller and a chipselect.  Most SPI slaves don't support
          dynamic device discovery; some are even write-only or read-only.
 

-         SPI is widely used by microcontollers to talk with sensors,
+         SPI is widely used by microcontrollers to talk with sensors,

          eeprom and flash memory, codecs and various other controller
          chips, analog to digital (and d-to-a) converters, and more.
          MMC and SD cards can be accessed using SPI protocol; and for
          eeprom and flash memory, codecs and various other controller
          chips, analog to digital (and d-to-a) converters, and more.
          MMC and SD cards can be accessed using SPI protocol; and for


@@ -75,11 +75,45 @@ config SPI_BUTTERFLY
          inexpensive battery powered microcontroller evaluation board.
          This same cable can be used to flash new firmware.
 
          inexpensive battery powered microcontroller evaluation board.
          This same cable can be used to flash new firmware.
 

+config SPI_MPC83xx
+       tristate "Freescale MPC83xx SPI controller"
+       depends on SPI_MASTER && PPC_83xx && EXPERIMENTAL
+       select SPI_BITBANG
+       help
+         This enables using the Freescale MPC83xx SPI controller in master
+         mode.
+
+         Note, this driver uniquely supports the SPI controller on the MPC83xx
+         family of PowerPC processors.  The MPC83xx uses a simple set of shift
+         registers for data (opposed to the CPM based descriptor model).
+
+config SPI_PXA2XX
+       tristate "PXA2xx SSP SPI master"
+       depends on SPI_MASTER && ARCH_PXA && EXPERIMENTAL
+       help
+         This enables using a PXA2xx SSP port as a SPI master controller.
+         The driver can be configured to use any SSP port and additional
+         documentation can be found a Documentation/spi/pxa2xx.
+
+config SPI_S3C24XX_GPIO
+       tristate "Samsung S3C24XX series SPI by GPIO"
+       depends on SPI_MASTER && ARCH_S3C2410 && SPI_BITBANG && EXPERIMENTAL
+       help
+         SPI driver for Samsung S3C24XX series ARM SoCs using
+         GPIO lines to provide the SPI bus. This can be used where
+         the inbuilt hardware cannot provide the transfer mode, or
+         where the board is using non hardware connected pins.

 #
 # Add new SPI master controllers in alphabetical order above this line
 #
 
 
 #
 # Add new SPI master controllers in alphabetical order above this line
 #
 
 

+config SPI_S3C24XX
+       tristate "Samsung S3C24XX series SPI"
+       depends on SPI_MASTER && ARCH_S3C2410 && EXPERIMENTAL
+       help
+         SPI driver for Samsung S3C24XX series ARM SoCs
+

 #
 # There are lots of SPI device types, with sensors and memory
 # being probably the most widely used ones.
 #
 # There are lots of SPI device types, with sensors and memory
 # being probably the most widely used ones.