fedora core 6 1.2949 + vserver 2.2.0

[linux-2.6.git] / drivers / usb / gadget / Kconfig

diff --git a/drivers/usb/gadget/Kconfig b/drivers/usb/gadget/Kconfig
index ff075a5..4097a86 100644 (file)
--- a/drivers/usb/gadget/Kconfig
+++ b/drivers/usb/gadget/Kconfig
@@ -7,7 +7,7 @@
 #
 #  - Host systems (like PCs) need CONFIG_USB (with "A" jacks).
 #  - Peripherals (like PDAs) need CONFIG_USB_GADGET (with "B" jacks).
 #
 #  - Host systems (like PCs) need CONFIG_USB (with "A" jacks).
 #  - Peripherals (like PDAs) need CONFIG_USB_GADGET (with "B" jacks).

-#  - Some systems have both kinds of of controller.
+#  - Some systems have both kinds of controllers.

 #
 # With help from a special transceiver and a "Mini-AB" jack, systems with
 # both kinds of controller can also support "USB On-the-Go" (CONFIG_USB_OTG).
 #
 # With help from a special transceiver and a "Mini-AB" jack, systems with
 # both kinds of controller can also support "USB On-the-Go" (CONFIG_USB_OTG).


@@ -26,7 +26,7 @@ config USB_GADGET
           you need a low level bus controller driver, and some software
           talking to it.  Peripheral controllers are often discrete silicon,
           or are integrated with the CPU in a microcontroller.  The more
           you need a low level bus controller driver, and some software
           talking to it.  Peripheral controllers are often discrete silicon,
           or are integrated with the CPU in a microcontroller.  The more

-          familiar host side controllers have names like like "EHCI", "OHCI",
+          familiar host side controllers have names like "EHCI", "OHCI",

           or "UHCI", and are usually integrated into southbridges on PC
           motherboards.
 
           or "UHCI", and are usually integrated into southbridges on PC
           motherboards.
 


@@ -69,11 +69,11 @@ choice
           often need board-specific hooks.
 
 config USB_GADGET_NET2280
           often need board-specific hooks.
 
 config USB_GADGET_NET2280

-       boolean "NetChip 2280"
+       boolean "NetChip 228x"

        depends on PCI
        select USB_GADGET_DUALSPEED
        help
        depends on PCI
        select USB_GADGET_DUALSPEED
        help

-          NetChip 2280 is a PCI based USB peripheral controller which
+          NetChip 2280 / 2282 is a PCI based USB peripheral controller which

           supports both full and high speed USB 2.0 data transfers.  
           
           It has six configurable endpoints, as well as endpoint zero
           supports both full and high speed USB 2.0 data transfers.  
           
           It has six configurable endpoints, as well as endpoint zero


@@ -187,10 +187,27 @@ config USB_OTG
 
           Select this only if your OMAP board has a Mini-AB connector.
 
 
           Select this only if your OMAP board has a Mini-AB connector.
 

+config USB_GADGET_AT91
+       boolean "AT91 USB Device Port"
+       depends on ARCH_AT91
+       select USB_GADGET_SELECTED
+       help
+          Many Atmel AT91 processors (such as the AT91RM2000) have a
+          full speed USB Device Port with support for five configurable
+          endpoints (plus endpoint zero).
+
+          Say "y" to link the driver statically, or "m" to build a
+          dynamically linked module called "at91_udc" and force all
+          gadget drivers to also be dynamically linked.
+
+config USB_AT91
+       tristate
+       depends on USB_GADGET_AT91
+       default USB_GADGET

 
 config USB_GADGET_DUMMY_HCD
        boolean "Dummy HCD (DEVELOPMENT)"
 
 config USB_GADGET_DUMMY_HCD
        boolean "Dummy HCD (DEVELOPMENT)"

-       depends on USB && EXPERIMENTAL
+       depends on (USB=y || (USB=m && USB_GADGET=m)) && EXPERIMENTAL

        select USB_GADGET_DUALSPEED
        help
          This host controller driver emulates USB, looping all data transfer
        select USB_GADGET_DUALSPEED
        help
          This host controller driver emulates USB, looping all data transfer


@@ -387,6 +404,20 @@ config USB_G_SERIAL
          which includes instructions and a "driver info file" needed to
          make MS-Windows work with this driver.
 
          which includes instructions and a "driver info file" needed to
          make MS-Windows work with this driver.
 

+config USB_MIDI_GADGET
+       tristate "MIDI Gadget (EXPERIMENTAL)"
+       depends on SND && EXPERIMENTAL
+       select SND_RAWMIDI
+       help
+         The MIDI Gadget acts as a USB Audio device, with one MIDI
+         input and one MIDI output. These MIDI jacks appear as
+         a sound "card" in the ALSA sound system. Other MIDI
+         connections can then be made on the gadget system, using
+         ALSA's aconnect utility etc.
+
+         Say "y" to link the driver statically, or "m" to build a
+         dynamically linked module called "g_midi".
+

 
 # put drivers that need isochronous transfer support (for audio
 # or video class gadget drivers), or specific hardware, here.
 
 # put drivers that need isochronous transfer support (for audio
 # or video class gadget drivers), or specific hardware, here.