fedora core 6 1.2949 + vserver 2.2.0

[linux-2.6.git] / drivers / usb / host / Kconfig

diff --git a/drivers/usb/host/Kconfig b/drivers/usb/host/Kconfig
index be3fd9b..cc60759 100644 (file)
--- a/drivers/usb/host/Kconfig
+++ b/drivers/usb/host/Kconfig
@@ -6,7 +6,7 @@ comment "USB Host Controller Drivers"
 
 config USB_EHCI_HCD
        tristate "EHCI HCD (USB 2.0) support"
 
 config USB_EHCI_HCD
        tristate "EHCI HCD (USB 2.0) support"

-       depends on USB && PCI
+       depends on USB && USB_ARCH_HAS_EHCI

        ---help---
          The Enhanced Host Controller Interface (EHCI) is standard for USB 2.0
          "high speed" (480 Mbit/sec, 60 Mbyte/sec) host controller hardware.
        ---help---
          The Enhanced Host Controller Interface (EHCI) is standard for USB 2.0
          "high speed" (480 Mbit/sec, 60 Mbyte/sec) host controller hardware.


@@ -47,12 +47,29 @@ config USB_EHCI_ROOT_HUB_TT
          controller is needed.  It's safe to say "y" even if your
          controller doesn't support this feature.
 
          controller is needed.  It's safe to say "y" even if your
          controller doesn't support this feature.
 

-         This supports the EHCI implementation from TransDimension Inc.
+         This supports the EHCI implementation that's originally
+         from ARC, and has since changed hands a few times.
+
+config USB_EHCI_TT_NEWSCHED
+       bool "Improved Transaction Translator scheduling (EXPERIMENTAL)"
+       depends on USB_EHCI_HCD && EXPERIMENTAL
+       ---help---
+         This changes the periodic scheduling code to fill more of the low
+         and full speed bandwidth available from the Transaction Translator
+         (TT) in USB 2.0 hubs.  Without this, only one transfer will be
+         issued in each microframe, significantly reducing the number of
+         periodic low/fullspeed transfers possible.
+
+         If you have multiple periodic low/fullspeed devices connected to a
+         highspeed USB hub which is connected to a highspeed USB Host
+         Controller, and some of those devices will not work correctly
+         (possibly due to "ENOSPC" or "-28" errors), say Y.
+
+         If unsure, say N.

 
 config USB_ISP116X_HCD
        tristate "ISP116X HCD support"
        depends on USB
 
 config USB_ISP116X_HCD
        tristate "ISP116X HCD support"
        depends on USB

-       default N

        ---help---
          The ISP1160 and ISP1161 chips are USB host controllers. Enable this
          option if your board has this chip. If unsure, say N.
        ---help---
          The ISP1160 and ISP1161 chips are USB host controllers. Enable this
          option if your board has this chip. If unsure, say N.


@@ -66,6 +83,7 @@ config USB_OHCI_HCD
        tristate "OHCI HCD support"
        depends on USB && USB_ARCH_HAS_OHCI
        select ISP1301_OMAP if MACH_OMAP_H2 || MACH_OMAP_H3
        tristate "OHCI HCD support"
        depends on USB && USB_ARCH_HAS_OHCI
        select ISP1301_OMAP if MACH_OMAP_H2 || MACH_OMAP_H3

+       select I2C if ARCH_PNX4008

        ---help---
          The Open Host Controller Interface (OHCI) is a standard for accessing
          USB 1.1 host controller hardware.  It does more in hardware than Intel's
        ---help---
          The Open Host Controller Interface (OHCI) is a standard for accessing
          USB 1.1 host controller hardware.  It does more in hardware than Intel's


@@ -124,10 +142,37 @@ config USB_UHCI_HCD
          To compile this driver as a module, choose M here: the
          module will be called uhci-hcd.
 
          To compile this driver as a module, choose M here: the
          module will be called uhci-hcd.
 

+config USB_U132_HCD
+       tristate "Elan U132 Adapter Host Controller"
+       depends on USB && USB_FTDI_ELAN
+       default M
+       help
+         The U132 adapter is a USB to CardBus adapter specifically designed
+         for PC cards that contain an OHCI host controller. Typical PC cards
+         are the Orange Mobile 3G Option GlobeTrotter Fusion card. The U132
+         adapter will *NOT* work with PC cards that do not contain an OHCI
+         controller.
+
+         For those PC cards that contain multiple OHCI controllers only the
+         first one is used.
+
+         The driver consists of two modules, the "ftdi-elan" module is a
+         USB client driver that interfaces to the FTDI chip within ELAN's
+         USB-to-PCMCIA adapter, and this "u132-hcd" module is a USB host
+         controller driver that talks to the OHCI controller within the
+         CardBus cards that are inserted in the U132 adapter.
+
+         This driver has been tested with a CardBus OHCI USB adapter, and
+         worked with a USB PEN Drive inserted into the first USB port of
+         the PCCARD. A rather pointless thing to do, but useful for testing.
+
+         It is safe to say M here.
+
+         See also <http://www.elandigitalsystems.com/support/ufaq/u132linux.php>
+

 config USB_SL811_HCD
        tristate "SL811HS HCD support"
        depends on USB
 config USB_SL811_HCD
        tristate "SL811HS HCD support"
        depends on USB

-       default N

        help
          The SL811HS is a single-port USB controller that supports either
          host side or peripheral side roles.  Enable this option if your
        help
          The SL811HS is a single-port USB controller that supports either
          host side or peripheral side roles.  Enable this option if your


@@ -140,7 +185,6 @@ config USB_SL811_HCD
 config USB_SL811_CS
        tristate "CF/PCMCIA support for SL811HS HCD"
        depends on USB_SL811_HCD && PCMCIA
 config USB_SL811_CS
        tristate "CF/PCMCIA support for SL811HS HCD"
        depends on USB_SL811_HCD && PCMCIA

-       default N

        help
          Wraps a PCMCIA driver around the SL811HS HCD, supporting the RATOC
          REX-CFU1U CF card (often used with PDAs).  If unsure, say N.
        help
          Wraps a PCMCIA driver around the SL811HS HCD, supporting the RATOC
          REX-CFU1U CF card (often used with PDAs).  If unsure, say N.