vserver 1.9.3

[linux-2.6.git] / drivers / video / Kconfig

diff --git a/drivers/video/Kconfig b/drivers/video/Kconfig
index 47be650..ab23abe 100644 (file)
--- a/drivers/video/Kconfig
+++ b/drivers/video/Kconfig
@@ -38,9 +38,20 @@ config FB
          (e.g. an accelerated X server) and that are not frame buffer
          device-aware may cause unexpected results. If unsure, say N.
 
          (e.g. an accelerated X server) and that are not frame buffer
          device-aware may cause unexpected results. If unsure, say N.
 

+config FB_MODE_HELPERS
+        bool "Enable Video Mode Handling Helpers"
+        depends on FB
+       default y
+       ---help---
+         This enables functions for handling video modes using the
+         Generalized Timing Formula and the EDID parser. A few drivers rely
+          on this feature such as the radeonfb, rivafb, and the i810fb. If
+         your driver does not take advantage of this feature, choosing Y will
+         just increase the kernel size by about 5K.
+

 config FB_CIRRUS
        tristate "Cirrus Logic support"
 config FB_CIRRUS
        tristate "Cirrus Logic support"

-       depends on FB && (AMIGA || PCI) && BROKEN
+       depends on FB && (ZORRO || PCI)

        ---help---
          This enables support for Cirrus Logic GD542x/543x based boards on
          Amiga: SD64, Piccolo, Picasso II/II+, Picasso IV, or EGS Spectrum.
        ---help---
          This enables support for Cirrus Logic GD542x/543x based boards on
          Amiga: SD64, Piccolo, Picasso II/II+, Picasso IV, or EGS Spectrum.


@@ -68,6 +79,19 @@ config FB_PM2_FIFO_DISCONNECT
        help
          Support the Permedia2 FIFO disconnect feature (see CONFIG_FB_PM2).
 
        help
          Support the Permedia2 FIFO disconnect feature (see CONFIG_FB_PM2).
 

+config FB_ARMCLCD
+       tristate "ARM PrimeCell PL110 support"
+       depends on FB && ARM && ARM_AMBA
+       help
+         This framebuffer device driver is for the ARM PrimeCell PL110
+         Colour LCD controller.  ARM PrimeCells provide the building
+         blocks for System on a Chip devices.
+
+         If you want to compile this as a module (=code which can be
+         inserted into and removed from the running kernel), say M
+         here and read <file:Documentation/modules.txt>.  The module
+         will be called amba-clcd.
+

 config FB_ACORN
        bool "Acorn VIDC support"
        depends on FB && ARM && ARCH_ACORN
 config FB_ACORN
        bool "Acorn VIDC support"
        depends on FB && ARM && ARCH_ACORN


@@ -93,7 +117,7 @@ config FB_SA1100
 
 config FB_CYBER2000
        tristate "CyberPro 2000/2010/5000 support"
 
 config FB_CYBER2000
        tristate "CyberPro 2000/2010/5000 support"

-       depends on FB && PCI
+       depends on FB && PCI && (BROKEN || !SPARC64)

        help
          This enables support for the Integraphics CyberPro 20x0 and 5000
          VGA chips used in the Rebel.com Netwinder and other machines.
        help
          This enables support for the Integraphics CyberPro 20x0 and 5000
          VGA chips used in the Rebel.com Netwinder and other machines.


@@ -225,6 +249,10 @@ config FB_CT65550
          This is the frame buffer device driver for the Chips & Technologies
          65550 graphics chip in PowerBooks.
 
          This is the frame buffer device driver for the Chips & Technologies
          65550 graphics chip in PowerBooks.
 

+config FB_ASILIANT
+       bool "Chips 69000 display support"
+       depends on FB && PCI
+

 config FB_IMSTT
        bool "IMS Twin Turbo display support"
        depends on FB && PCI
 config FB_IMSTT
        bool "IMS Twin Turbo display support"
        depends on FB && PCI


@@ -234,7 +262,7 @@ config FB_IMSTT
 
 config FB_S3TRIO
        bool "S3 Trio display support"
 
 config FB_S3TRIO
        bool "S3 Trio display support"

-       depends on FB && PPC
+       depends on FB && PPC && BROKEN

        help
          If you have a S3 Trio say Y. Say N for S3 Virge.
 
        help
          If you have a S3 Trio say Y. Say N for S3 Virge.
 


@@ -308,6 +336,14 @@ config FB_HGA
          As this card technology is 15 years old, most people will answer N
          here.
 
          As this card technology is 15 years old, most people will answer N
          here.
 

+config FB_HGA_ACCEL
+       bool "Hercules mono Acceleration functions (EXPERIMENTAL)"
+       depends on FB_HGA && EXPERIMENTAL
+       ---help---
+       This will compile the Hercules mono graphics with
+       acceleration functions.
+
+

 config VIDEO_SELECT
        bool
        depends on FB && X86
 config VIDEO_SELECT
        bool
        depends on FB && X86


@@ -319,6 +355,21 @@ config FB_SGIVW
        help
          SGI Visual Workstation support for framebuffer graphics.
 
        help
          SGI Visual Workstation support for framebuffer graphics.
 

+config FB_GBE
+       bool "SGI Graphics Backend frame buffer support"
+       depends on FB && (SGI_IP32 || X86_VISWS)
+       help
+         This is the frame buffer device driver for SGI Graphics Backend.
+         This chip is used in SGI O2 and Visual Workstation 320/540.
+
+config FB_GBE_MEM
+       int "Video memory size in MB"
+       depends on FB_GBE
+       default 8
+       help
+         This is the amount of memory reserved for the framebuffer,
+         which can be any value between 1MB and 8MB.
+

 config BUS_I2C
        bool
        depends on FB && VISWS
 config BUS_I2C
        bool
        depends on FB && VISWS


@@ -365,38 +416,21 @@ config FB_PVR2
          (<file:drivers/video/pvr2fb.c>). Please see the file
          <file:Documentation/fb/pvr2fb.txt>.
 
          (<file:drivers/video/pvr2fb.c>). Please see the file
          <file:Documentation/fb/pvr2fb.txt>.
 

-config FB_E1355
+config FB_EPSON1355

        bool "Epson 1355 framebuffer support"
        bool "Epson 1355 framebuffer support"

-       depends on FB && SUPERH
+       depends on FB && (SUPERH || ARCH_CEIVA)

        help
          Build in support for the SED1355 Epson Research Embedded RAMDAC
          LCD/CRT Controller (since redesignated as the S1D13505) as a
          framebuffer.  Product specs at
          <http://www.erd.epson.com/vdc/html/products.htm>.
 
        help
          Build in support for the SED1355 Epson Research Embedded RAMDAC
          LCD/CRT Controller (since redesignated as the S1D13505) as a
          framebuffer.  Product specs at
          <http://www.erd.epson.com/vdc/html/products.htm>.
 

-config E1355_REG_BASE
-       hex "Register Base Address"
-       depends on FB_E1355
-       default "a8000000"
-       help
-         Epson SED1355/S1D13505 LCD/CRT controller register base address.
-         See the manuals at
-         <http://www.erd.epson.com/vdc/html/contents/S1D13505.htm> for
-         discussion.
-
-config E1355_FB_BASE
-       hex "Framebuffer Base Address"
-       depends on FB_E1355
-       default "a8200000"
-       help
-         Epson SED1355/S1D13505 LCD/CRT controller memory base address.  See
-         the manuals at
-         <http://www.erd.epson.com/vdc/html/contents/S1D13505.htm> for
-         discussion.
-

 config FB_RIVA
        tristate "nVidia Riva support"
        depends on FB && PCI
 config FB_RIVA
        tristate "nVidia Riva support"
        depends on FB && PCI

+       select I2C_ALGOBIT if FB_RIVA_I2C
+       select I2C if FB_RIVA_I2C
+       select FB_MODE_HELPERS

        help
          This driver supports graphics boards with the nVidia Riva/Geforce
          chips.
        help
          This driver supports graphics boards with the nVidia Riva/Geforce
          chips.


@@ -405,9 +439,33 @@ config FB_RIVA
          To compile this driver as a module, choose M here: the
          module will be called rivafb.
 
          To compile this driver as a module, choose M here: the
          module will be called rivafb.
 

+config FB_RIVA_I2C
+       bool "Enable DDC Support"
+       depends on FB_RIVA
+       help
+         This enables I2C support for nVidia Chipsets.  This is used
+         only for getting EDID information from the attached display
+         allowing for robust video mode handling and switching.
+
+         Because fbdev-2.6 requires that drivers must be able to
+         independently validate video mode parameters, you should say Y
+         here.
+
+config FB_RIVA_DEBUG
+       bool "Lots of debug output from Riva(nVidia) driver"
+       depends on FB_RIVA
+       default n
+       help
+         Say Y here if you want the Riva driver to output all sorts
+         of debugging informations to provide to the maintainer when
+         something goes wrong.
+

 config FB_I810
        tristate "Intel 810/815 support (EXPERIMENTAL)"
 config FB_I810
        tristate "Intel 810/815 support (EXPERIMENTAL)"

-       depends on FB && AGP && AGP_INTEL && EXPERIMENTAL && PCI        
+       depends on FB && EXPERIMENTAL && PCI && X86 && !X86_64
+       select AGP
+       select AGP_INTEL
+       select FB_MODE_HELPERS

        help
          This driver supports the on-board graphics built in to the Intel 810 
           and 815 chipsets.  Say Y if you have and plan to use such a board.
        help
          This driver supports the on-board graphics built in to the Intel 810 
           and 815 chipsets.  Say Y if you have and plan to use such a board.


@@ -611,6 +669,7 @@ config FB_RADEON
        depends on FB && PCI
        select I2C_ALGOBIT if FB_RADEON_I2C
        select I2C if FB_RADEON_I2C
        depends on FB && PCI
        select I2C_ALGOBIT if FB_RADEON_I2C
        select I2C if FB_RADEON_I2C

+       select FB_MODE_HELPERS

        help
          Choose this option if you want to use an ATI Radeon graphics card as
          a framebuffer device.  There are both PCI and AGP versions.  You
        help
          Choose this option if you want to use an ATI Radeon graphics card as
          a framebuffer device.  There are both PCI and AGP versions.  You


@@ -716,6 +775,7 @@ config FB_SIS_315
 config FB_NEOMAGIC
        tristate "NeoMagic display support"
        depends on FB && PCI
 config FB_NEOMAGIC
        tristate "NeoMagic display support"
        depends on FB && PCI

+       select FB_MODE_HELPERS

        help
          This driver supports notebooks with NeoMagic PCI chips.
          Say Y if you have such a graphics card. 
        help
          This driver supports notebooks with NeoMagic PCI chips.
          Say Y if you have such a graphics card. 


@@ -743,6 +803,14 @@ config FB_3DFX
          To compile this driver as a module, choose M here: the
          module will be called tdfxfb.
 
          To compile this driver as a module, choose M here: the
          module will be called tdfxfb.
 

+config FB_3DFX_ACCEL
+       bool "3Dfx Banshee/Voodoo3 Acceleration functions (EXPERIMENTAL)"
+       depends on FB_3DFX && EXPERIMENTAL
+       ---help---
+       This will compile the 3Dfx Banshee/Voodoo3 frame buffer device
+       with acceleration functions.
+
+

 config FB_VOODOO1
        tristate "3Dfx Voodoo Graphics (sst1) support"
        depends on FB && PCI
 config FB_VOODOO1
        tristate "3Dfx Voodoo Graphics (sst1) support"
        depends on FB && PCI


@@ -772,6 +840,14 @@ config FB_TRIDENT
          To compile this driver as a module, choose M here: the
          module will be called tridentfb.
 
          To compile this driver as a module, choose M here: the
          module will be called tridentfb.
 

+config FB_TRIDENT_ACCEL
+       bool "Trident Acceleration functions (EXPERIMENTAL)"
+       depends on FB_TRIDENT && EXPERIMENTAL
+       ---help---
+       This will compile the Trident frame buffer device with
+       acceleration functions.
+
+

 config FB_PM3
        tristate "Permedia3 support"
        depends on FB && PCI && BROKEN
 config FB_PM3
        tristate "Permedia3 support"
        depends on FB && PCI && BROKEN


@@ -880,6 +956,37 @@ config FB_68328
          Say Y here if you want to support the built-in frame buffer of
          the Motorola 68328 CPU family.
 
          Say Y here if you want to support the built-in frame buffer of
          the Motorola 68328 CPU family.
 

+config FB_PXA
+       tristate "PXA LCD framebuffer support"
+       depends on FB && ARCH_PXA
+       ---help---
+         Frame buffer driver for the built-in LCD controller in the Intel
+         PXA2x0 processor.
+
+         This driver is also available as a module ( = code which can be
+         inserted and removed from the running kernel whenever you want). The
+         module will be called vfb. If you want to compile it as a module,
+         say M here and read <file:Documentation/modules.txt>.
+
+         If unsure, say N.
+
+config FB_PXA_PARAMETERS
+       bool "PXA LCD command line parameters"
+       default n
+       depends on FB_PXA
+       ---help---
+         Enable the use of kernel command line or module parameters
+         to configure the physical properties of the LCD panel when
+         using the PXA LCD driver.
+
+         This option allows you to override the panel parameters
+         supplied by the platform in order to support multiple
+         different models of flatpanel. If you will only be using a
+         single model of flatpanel then you can safely leave this
+         option disabled.
+
+         Documentation/fb/pxafb.txt describes the available parameters.
+

 config FB_VIRTUAL
        tristate "Virtual Frame Buffer support (ONLY FOR TESTING!)"
        depends on FB
 config FB_VIRTUAL
        tristate "Virtual Frame Buffer support (ONLY FOR TESTING!)"
        depends on FB