+
+/*
+ * Open a subchannel for sending arbitrary data to the system
+ * controller network via the system controller device associated with
+ * 'nasid'. Return the subchannel number or a negative error code.
+ */
+static inline int
+ia64_sn_irtr_open(nasid_t nasid)
+{
+ struct ia64_sal_retval rv;
+ SAL_CALL_REENTRANT(rv, SN_SAL_IROUTER_OP, SAL_IROUTER_OPEN, nasid,
+ 0, 0, 0, 0, 0);
+ return (int) rv.v0;
+}
+
+/*
+ * Close system controller subchannel 'subch' previously opened on 'nasid'.
+ */
+static inline int
+ia64_sn_irtr_close(nasid_t nasid, int subch)
+{
+ struct ia64_sal_retval rv;
+ SAL_CALL_REENTRANT(rv, SN_SAL_IROUTER_OP, SAL_IROUTER_CLOSE,
+ (u64) nasid, (u64) subch, 0, 0, 0, 0);
+ return (int) rv.status;
+}
+
+/*
+ * Read data from system controller associated with 'nasid' on
+ * subchannel 'subch'. The buffer to be filled is pointed to by
+ * 'buf', and its capacity is in the integer pointed to by 'len'. The
+ * referent of 'len' is set to the number of bytes read by the SAL
+ * call. The return value is either SALRET_OK (for bytes read) or
+ * SALRET_ERROR (for error or "no data available").
+ */
+static inline int
+ia64_sn_irtr_recv(nasid_t nasid, int subch, char *buf, int *len)
+{
+ struct ia64_sal_retval rv;
+ SAL_CALL_REENTRANT(rv, SN_SAL_IROUTER_OP, SAL_IROUTER_RECV,
+ (u64) nasid, (u64) subch, (u64) buf, (u64) len,
+ 0, 0);
+ return (int) rv.status;
+}
+
+/*
+ * Write data to the system controller network via the system
+ * controller associated with 'nasid' on suchannel 'subch'. The
+ * buffer to be written out is pointed to by 'buf', and 'len' is the
+ * number of bytes to be written. The return value is either the
+ * number of bytes written (which could be zero) or a negative error
+ * code.
+ */
+static inline int
+ia64_sn_irtr_send(nasid_t nasid, int subch, char *buf, int len)
+{
+ struct ia64_sal_retval rv;
+ SAL_CALL_REENTRANT(rv, SN_SAL_IROUTER_OP, SAL_IROUTER_SEND,
+ (u64) nasid, (u64) subch, (u64) buf, (u64) len,
+ 0, 0);
+ return (int) rv.v0;
+}
+
+/*
+ * Check whether any interrupts are pending for the system controller
+ * associated with 'nasid' and its subchannel 'subch'. The return
+ * value is a mask of pending interrupts (SAL_IROUTER_INTR_XMIT and/or
+ * SAL_IROUTER_INTR_RECV).
+ */
+static inline int
+ia64_sn_irtr_intr(nasid_t nasid, int subch)
+{
+ struct ia64_sal_retval rv;
+ SAL_CALL_REENTRANT(rv, SN_SAL_IROUTER_OP, SAL_IROUTER_INTR_STATUS,
+ (u64) nasid, (u64) subch, 0, 0, 0, 0);
+ return (int) rv.v0;
+}
+
+/*
+ * Enable the interrupt indicated by the intr parameter (either
+ * SAL_IROUTER_INTR_XMIT or SAL_IROUTER_INTR_RECV).
+ */
+static inline int
+ia64_sn_irtr_intr_enable(nasid_t nasid, int subch, u64 intr)
+{
+ struct ia64_sal_retval rv;
+ SAL_CALL_REENTRANT(rv, SN_SAL_IROUTER_OP, SAL_IROUTER_INTR_ON,
+ (u64) nasid, (u64) subch, intr, 0, 0, 0);
+ return (int) rv.v0;
+}
+
+/*
+ * Disable the interrupt indicated by the intr parameter (either
+ * SAL_IROUTER_INTR_XMIT or SAL_IROUTER_INTR_RECV).
+ */
+static inline int
+ia64_sn_irtr_intr_disable(nasid_t nasid, int subch, u64 intr)
+{
+ struct ia64_sal_retval rv;
+ SAL_CALL_REENTRANT(rv, SN_SAL_IROUTER_OP, SAL_IROUTER_INTR_OFF,
+ (u64) nasid, (u64) subch, intr, 0, 0, 0);
+ return (int) rv.v0;
+}
+
+/*
+ * Set up a node as the point of contact for system controller
+ * environmental event delivery.
+ */
+static inline int
+ia64_sn_sysctl_event_init(nasid_t nasid)
+{
+ struct ia64_sal_retval rv;
+ SAL_CALL_REENTRANT(rv, SN_SAL_SYSCTL_EVENT, (u64) nasid,
+ 0, 0, 0, 0, 0, 0);
+ return (int) rv.v0;
+}
+
+/*
+ * Ask the system controller on the specified nasid to reset
+ * the CX corelet clock. Only valid on TIO nodes.
+ */
+static inline int
+ia64_sn_sysctl_tio_clock_reset(nasid_t nasid)
+{
+ struct ia64_sal_retval rv;
+ SAL_CALL_REENTRANT(rv, SN_SAL_SYSCTL_OP, SAL_SYSCTL_OP_TIO_JLCK_RST,
+ nasid, 0, 0, 0, 0, 0);
+ if (rv.status != 0)
+ return (int)rv.status;
+ if (rv.v0 != 0)
+ return (int)rv.v0;
+
+ return 0;
+}
+
+/*
+ * Get the associated ioboard type for a given nasid.
+ */
+static inline s64
+ia64_sn_sysctl_ioboard_get(nasid_t nasid, u16 *ioboard)
+{
+ struct ia64_sal_retval isrv;
+ SAL_CALL_REENTRANT(isrv, SN_SAL_SYSCTL_OP, SAL_SYSCTL_OP_IOBOARD,
+ nasid, 0, 0, 0, 0, 0);
+ if (isrv.v0 != 0) {
+ *ioboard = isrv.v0;
+ return isrv.status;
+ }
+ if (isrv.v1 != 0) {
+ *ioboard = isrv.v1;
+ return isrv.status;
+ }
+
+ return isrv.status;
+}
+
+/**
+ * ia64_sn_get_fit_compt - read a FIT entry from the PROM header
+ * @nasid: NASID of node to read
+ * @index: FIT entry index to be retrieved (0..n)
+ * @fitentry: 16 byte buffer where FIT entry will be stored.
+ * @banbuf: optional buffer for retrieving banner
+ * @banlen: length of banner buffer
+ *
+ * Access to the physical PROM chips needs to be serialized since reads and
+ * writes can't occur at the same time, so we need to call into the SAL when
+ * we want to look at the FIT entries on the chips.
+ *
+ * Returns:
+ * %SALRET_OK if ok
+ * %SALRET_INVALID_ARG if index too big
+ * %SALRET_NOT_IMPLEMENTED if running on older PROM
+ * ??? if nasid invalid OR banner buffer not large enough
+ */
+static inline int
+ia64_sn_get_fit_compt(u64 nasid, u64 index, void *fitentry, void *banbuf,
+ u64 banlen)
+{
+ struct ia64_sal_retval rv;
+ SAL_CALL_NOLOCK(rv, SN_SAL_GET_FIT_COMPT, nasid, index, fitentry,
+ banbuf, banlen, 0, 0);
+ return (int) rv.status;
+}
+
+/*
+ * Initialize the SAL components of the system controller
+ * communication driver; specifically pass in a sizable buffer that
+ * can be used for allocation of subchannel queues as new subchannels
+ * are opened. "buf" points to the buffer, and "len" specifies its
+ * length.
+ */
+static inline int
+ia64_sn_irtr_init(nasid_t nasid, void *buf, int len)
+{
+ struct ia64_sal_retval rv;
+ SAL_CALL_REENTRANT(rv, SN_SAL_IROUTER_OP, SAL_IROUTER_INIT,
+ (u64) nasid, (u64) buf, (u64) len, 0, 0, 0);
+ return (int) rv.status;
+}
+
+/*
+ * Returns the nasid, subnode & slice corresponding to a SAPIC ID
+ *
+ * In:
+ * arg0 - SN_SAL_GET_SAPIC_INFO
+ * arg1 - sapicid (lid >> 16)
+ * Out:
+ * v0 - nasid
+ * v1 - subnode
+ * v2 - slice
+ */
+static inline u64
+ia64_sn_get_sapic_info(int sapicid, int *nasid, int *subnode, int *slice)
+{
+ struct ia64_sal_retval ret_stuff;
+
+ ret_stuff.status = 0;
+ ret_stuff.v0 = 0;
+ ret_stuff.v1 = 0;
+ ret_stuff.v2 = 0;
+ SAL_CALL_NOLOCK(ret_stuff, SN_SAL_GET_SAPIC_INFO, sapicid, 0, 0, 0, 0, 0, 0);
+
+/***** BEGIN HACK - temp til old proms no longer supported ********/
+ if (ret_stuff.status == SALRET_NOT_IMPLEMENTED) {
+ if (nasid) *nasid = sapicid & 0xfff;
+ if (subnode) *subnode = (sapicid >> 13) & 1;
+ if (slice) *slice = (sapicid >> 12) & 3;
+ return 0;
+ }
+/***** END HACK *******/
+
+ if (ret_stuff.status < 0)
+ return ret_stuff.status;
+
+ if (nasid) *nasid = (int) ret_stuff.v0;
+ if (subnode) *subnode = (int) ret_stuff.v1;
+ if (slice) *slice = (int) ret_stuff.v2;
+ return 0;
+}
+
+/*
+ * Returns information about the HUB/SHUB.
+ * In:
+ * arg0 - SN_SAL_GET_SN_INFO
+ * arg1 - 0 (other values reserved for future use)
+ * Out:
+ * v0
+ * [7:0] - shub type (0=shub1, 1=shub2)
+ * [15:8] - Log2 max number of nodes in entire system (includes
+ * C-bricks, I-bricks, etc)
+ * [23:16] - Log2 of nodes per sharing domain
+ * [31:24] - partition ID
+ * [39:32] - coherency_id
+ * [47:40] - regionsize
+ * v1
+ * [15:0] - nasid mask (ex., 0x7ff for 11 bit nasid)
+ * [23:15] - bit position of low nasid bit
+ */
+static inline u64
+ia64_sn_get_sn_info(int fc, u8 *shubtype, u16 *nasid_bitmask, u8 *nasid_shift,
+ u8 *systemsize, u8 *sharing_domain_size, u8 *partid, u8 *coher, u8 *reg)
+{
+ struct ia64_sal_retval ret_stuff;
+
+ ret_stuff.status = 0;
+ ret_stuff.v0 = 0;
+ ret_stuff.v1 = 0;
+ ret_stuff.v2 = 0;
+ SAL_CALL_NOLOCK(ret_stuff, SN_SAL_GET_SN_INFO, fc, 0, 0, 0, 0, 0, 0);
+
+/***** BEGIN HACK - temp til old proms no longer supported ********/
+ if (ret_stuff.status == SALRET_NOT_IMPLEMENTED) {
+ int nasid = get_sapicid() & 0xfff;
+#define SH_SHUB_ID_NODES_PER_BIT_MASK 0x001f000000000000UL
+#define SH_SHUB_ID_NODES_PER_BIT_SHFT 48
+ if (shubtype) *shubtype = 0;
+ if (nasid_bitmask) *nasid_bitmask = 0x7ff;
+ if (nasid_shift) *nasid_shift = 38;
+ if (systemsize) *systemsize = 10;
+ if (sharing_domain_size) *sharing_domain_size = 8;
+ if (partid) *partid = ia64_sn_sysctl_partition_get(nasid);
+ if (coher) *coher = nasid >> 9;
+ if (reg) *reg = (HUB_L((u64 *) LOCAL_MMR_ADDR(SH1_SHUB_ID)) & SH_SHUB_ID_NODES_PER_BIT_MASK) >>
+ SH_SHUB_ID_NODES_PER_BIT_SHFT;
+ return 0;
+ }
+/***** END HACK *******/
+
+ if (ret_stuff.status < 0)
+ return ret_stuff.status;
+
+ if (shubtype) *shubtype = ret_stuff.v0 & 0xff;
+ if (systemsize) *systemsize = (ret_stuff.v0 >> 8) & 0xff;
+ if (sharing_domain_size) *sharing_domain_size = (ret_stuff.v0 >> 16) & 0xff;
+ if (partid) *partid = (ret_stuff.v0 >> 24) & 0xff;
+ if (coher) *coher = (ret_stuff.v0 >> 32) & 0xff;
+ if (reg) *reg = (ret_stuff.v0 >> 40) & 0xff;
+ if (nasid_bitmask) *nasid_bitmask = (ret_stuff.v1 & 0xffff);
+ if (nasid_shift) *nasid_shift = (ret_stuff.v1 >> 16) & 0xff;
+ return 0;
+}
+
+/*
+ * This is the access point to the Altix PROM hardware performance
+ * and status monitoring interface. For info on using this, see
+ * include/asm-ia64/sn/sn2/sn_hwperf.h
+ */
+static inline int
+ia64_sn_hwperf_op(nasid_t nasid, u64 opcode, u64 a0, u64 a1, u64 a2,
+ u64 a3, u64 a4, int *v0)
+{
+ struct ia64_sal_retval rv;
+ SAL_CALL_NOLOCK(rv, SN_SAL_HWPERF_OP, (u64)nasid,
+ opcode, a0, a1, a2, a3, a4);
+ if (v0)
+ *v0 = (int) rv.v0;
+ return (int) rv.status;
+}
+
+static inline int
+ia64_sn_ioif_get_pci_topology(u64 buf, u64 len)
+{
+ struct ia64_sal_retval rv;
+ SAL_CALL_NOLOCK(rv, SN_SAL_IOIF_GET_PCI_TOPOLOGY, buf, len, 0, 0, 0, 0, 0);
+ return (int) rv.status;
+}
+
+/*
+ * BTE error recovery is implemented in SAL
+ */
+static inline int
+ia64_sn_bte_recovery(nasid_t nasid)
+{
+ struct ia64_sal_retval rv;
+
+ rv.status = 0;
+ SAL_CALL_NOLOCK(rv, SN_SAL_BTE_RECOVER, (u64)nasid, 0, 0, 0, 0, 0, 0);
+ if (rv.status == SALRET_NOT_IMPLEMENTED)
+ return 0;
+ return (int) rv.status;
+}
+
+static inline int
+ia64_sn_is_fake_prom(void)
+{
+ struct ia64_sal_retval rv;
+ SAL_CALL_NOLOCK(rv, SN_SAL_FAKE_PROM, 0, 0, 0, 0, 0, 0, 0);
+ return (rv.status == 0);
+}
+
+static inline int
+ia64_sn_get_prom_feature_set(int set, unsigned long *feature_set)
+{
+ struct ia64_sal_retval rv;
+
+ SAL_CALL_NOLOCK(rv, SN_SAL_GET_PROM_FEATURE_SET, set, 0, 0, 0, 0, 0, 0);
+ if (rv.status != 0)
+ return rv.status;
+ *feature_set = rv.v0;
+ return 0;
+}
+
+static inline int
+ia64_sn_set_os_feature(int feature)
+{
+ struct ia64_sal_retval rv;
+
+ SAL_CALL_NOLOCK(rv, SN_SAL_SET_OS_FEATURE_SET, feature, 0, 0, 0, 0, 0, 0);
+ return rv.status;
+}
+
+static inline int
+sn_inject_error(u64 paddr, u64 *data, u64 *ecc)
+{
+ struct ia64_sal_retval ret_stuff;
+ unsigned long irq_flags;
+
+ local_irq_save(irq_flags);
+ ia64_sal_oemcall_nolock(&ret_stuff, SN_SAL_INJECT_ERROR, paddr, (u64)data,
+ (u64)ecc, 0, 0, 0, 0);
+ local_irq_restore(irq_flags);
+ return ret_stuff.status;
+}