-/*
- * Cache strategies
- */
-
-/* The NULL strategy leaves everything up to the controller. This tends to be a
- * pessimal but functional choice.
- */
-#define CACHE_NULL 0
-/* Prefetch data when reading. We continually attempt to load the next 32 sectors
- * into the controller cache.
- */
-#define CACHE_PREFETCH 1
-/* Prefetch data when reading. We sometimes attempt to load the next 32 sectors
- * into the controller cache. When an I/O is less <= 8K we assume its probably
- * not sequential and don't prefetch (default)
- */
-#define CACHE_SMARTFETCH 2
-/* Data is written to the cache and then out on to the disk. The I/O must be
- * physically on the medium before the write is acknowledged (default without
- * NVRAM)
- */
-#define CACHE_WRITETHROUGH 17
-/* Data is written to the cache and then out on to the disk. The controller
- * is permitted to write back the cache any way it wants. (default if battery
- * backed NVRAM is present). It can be useful to set this for swap regardless of
- * battery state.
- */
-#define CACHE_WRITEBACK 18
-/* Optimise for under powered controllers, especially on RAID1 and RAID0. We
- * write large I/O's directly to disk bypassing the cache to avoid the extra
- * memory copy hits. Small writes are writeback cached
- */
-#define CACHE_SMARTBACK 19
-/* Optimise for under powered controllers, especially on RAID1 and RAID0. We
- * write large I/O's directly to disk bypassing the cache to avoid the extra
- * memory copy hits. Small writes are writethrough cached. Suitable for devices
- * lacking battery backup
- */
-#define CACHE_SMARTTHROUGH 20
-
-/*
- * Ioctl structures
- */
-
-#define BLKI2OGRSTRAT _IOR('2', 1, int)
-#define BLKI2OGWSTRAT _IOR('2', 2, int)
-#define BLKI2OSRSTRAT _IOW('2', 3, int)
-#define BLKI2OSWSTRAT _IOW('2', 4, int)
-
-/*
- * I2O Function codes
- */
-
-/*
- * Executive Class
- */
-#define I2O_CMD_ADAPTER_ASSIGN 0xB3
-#define I2O_CMD_ADAPTER_READ 0xB2
-#define I2O_CMD_ADAPTER_RELEASE 0xB5
-#define I2O_CMD_BIOS_INFO_SET 0xA5
-#define I2O_CMD_BOOT_DEVICE_SET 0xA7
-#define I2O_CMD_CONFIG_VALIDATE 0xBB
-#define I2O_CMD_CONN_SETUP 0xCA
-#define I2O_CMD_DDM_DESTROY 0xB1
-#define I2O_CMD_DDM_ENABLE 0xD5
-#define I2O_CMD_DDM_QUIESCE 0xC7
-#define I2O_CMD_DDM_RESET 0xD9
-#define I2O_CMD_DDM_SUSPEND 0xAF
-#define I2O_CMD_DEVICE_ASSIGN 0xB7
-#define I2O_CMD_DEVICE_RELEASE 0xB9
-#define I2O_CMD_HRT_GET 0xA8
-#define I2O_CMD_ADAPTER_CLEAR 0xBE
-#define I2O_CMD_ADAPTER_CONNECT 0xC9
-#define I2O_CMD_ADAPTER_RESET 0xBD
-#define I2O_CMD_LCT_NOTIFY 0xA2
-#define I2O_CMD_OUTBOUND_INIT 0xA1
-#define I2O_CMD_PATH_ENABLE 0xD3
-#define I2O_CMD_PATH_QUIESCE 0xC5
-#define I2O_CMD_PATH_RESET 0xD7
-#define I2O_CMD_STATIC_MF_CREATE 0xDD
-#define I2O_CMD_STATIC_MF_RELEASE 0xDF
-#define I2O_CMD_STATUS_GET 0xA0
-#define I2O_CMD_SW_DOWNLOAD 0xA9
-#define I2O_CMD_SW_UPLOAD 0xAB
-#define I2O_CMD_SW_REMOVE 0xAD
-#define I2O_CMD_SYS_ENABLE 0xD1
-#define I2O_CMD_SYS_MODIFY 0xC1
-#define I2O_CMD_SYS_QUIESCE 0xC3
-#define I2O_CMD_SYS_TAB_SET 0xA3
-
-/*
- * Utility Class
- */
-#define I2O_CMD_UTIL_NOP 0x00
-#define I2O_CMD_UTIL_ABORT 0x01
-#define I2O_CMD_UTIL_CLAIM 0x09
-#define I2O_CMD_UTIL_RELEASE 0x0B
-#define I2O_CMD_UTIL_PARAMS_GET 0x06
-#define I2O_CMD_UTIL_PARAMS_SET 0x05
-#define I2O_CMD_UTIL_EVT_REGISTER 0x13
-#define I2O_CMD_UTIL_EVT_ACK 0x14
-#define I2O_CMD_UTIL_CONFIG_DIALOG 0x10
-#define I2O_CMD_UTIL_DEVICE_RESERVE 0x0D
-#define I2O_CMD_UTIL_DEVICE_RELEASE 0x0F
-#define I2O_CMD_UTIL_LOCK 0x17
-#define I2O_CMD_UTIL_LOCK_RELEASE 0x19
-#define I2O_CMD_UTIL_REPLY_FAULT_NOTIFY 0x15
-
-/*
- * SCSI Host Bus Adapter Class
- */
-#define I2O_CMD_SCSI_EXEC 0x81
-#define I2O_CMD_SCSI_ABORT 0x83
-#define I2O_CMD_SCSI_BUSRESET 0x27
-
-/*
- * Random Block Storage Class
- */
-#define I2O_CMD_BLOCK_READ 0x30
-#define I2O_CMD_BLOCK_WRITE 0x31
-#define I2O_CMD_BLOCK_CFLUSH 0x37
-#define I2O_CMD_BLOCK_MLOCK 0x49
-#define I2O_CMD_BLOCK_MUNLOCK 0x4B
-#define I2O_CMD_BLOCK_MMOUNT 0x41
-#define I2O_CMD_BLOCK_MEJECT 0x43
-#define I2O_CMD_BLOCK_POWER 0x70
-
-#define I2O_PRIVATE_MSG 0xFF
-
-/* Command status values */
-
-#define I2O_CMD_IN_PROGRESS 0x01
-#define I2O_CMD_REJECTED 0x02
-#define I2O_CMD_FAILED 0x03
-#define I2O_CMD_COMPLETED 0x04
-
-/* I2O API function return values */
-
-#define I2O_RTN_NO_ERROR 0
-#define I2O_RTN_NOT_INIT 1
-#define I2O_RTN_FREE_Q_EMPTY 2
-#define I2O_RTN_TCB_ERROR 3
-#define I2O_RTN_TRANSACTION_ERROR 4
-#define I2O_RTN_ADAPTER_ALREADY_INIT 5
-#define I2O_RTN_MALLOC_ERROR 6
-#define I2O_RTN_ADPTR_NOT_REGISTERED 7
-#define I2O_RTN_MSG_REPLY_TIMEOUT 8
-#define I2O_RTN_NO_STATUS 9
-#define I2O_RTN_NO_FIRM_VER 10
-#define I2O_RTN_NO_LINK_SPEED 11
-
-/* Reply message status defines for all messages */
-
-#define I2O_REPLY_STATUS_SUCCESS 0x00
-#define I2O_REPLY_STATUS_ABORT_DIRTY 0x01
-#define I2O_REPLY_STATUS_ABORT_NO_DATA_TRANSFER 0x02
-#define I2O_REPLY_STATUS_ABORT_PARTIAL_TRANSFER 0x03
-#define I2O_REPLY_STATUS_ERROR_DIRTY 0x04
-#define I2O_REPLY_STATUS_ERROR_NO_DATA_TRANSFER 0x05
-#define I2O_REPLY_STATUS_ERROR_PARTIAL_TRANSFER 0x06
-#define I2O_REPLY_STATUS_PROCESS_ABORT_DIRTY 0x08
-#define I2O_REPLY_STATUS_PROCESS_ABORT_NO_DATA_TRANSFER 0x09
-#define I2O_REPLY_STATUS_PROCESS_ABORT_PARTIAL_TRANSFER 0x0A
-#define I2O_REPLY_STATUS_TRANSACTION_ERROR 0x0B
-#define I2O_REPLY_STATUS_PROGRESS_REPORT 0x80
-
-/* Status codes and Error Information for Parameter functions */
-
-#define I2O_PARAMS_STATUS_SUCCESS 0x00
-#define I2O_PARAMS_STATUS_BAD_KEY_ABORT 0x01
-#define I2O_PARAMS_STATUS_BAD_KEY_CONTINUE 0x02
-#define I2O_PARAMS_STATUS_BUFFER_FULL 0x03
-#define I2O_PARAMS_STATUS_BUFFER_TOO_SMALL 0x04
-#define I2O_PARAMS_STATUS_FIELD_UNREADABLE 0x05
-#define I2O_PARAMS_STATUS_FIELD_UNWRITEABLE 0x06
-#define I2O_PARAMS_STATUS_INSUFFICIENT_FIELDS 0x07
-#define I2O_PARAMS_STATUS_INVALID_GROUP_ID 0x08
-#define I2O_PARAMS_STATUS_INVALID_OPERATION 0x09
-#define I2O_PARAMS_STATUS_NO_KEY_FIELD 0x0A
-#define I2O_PARAMS_STATUS_NO_SUCH_FIELD 0x0B
-#define I2O_PARAMS_STATUS_NON_DYNAMIC_GROUP 0x0C
-#define I2O_PARAMS_STATUS_OPERATION_ERROR 0x0D
-#define I2O_PARAMS_STATUS_SCALAR_ERROR 0x0E
-#define I2O_PARAMS_STATUS_TABLE_ERROR 0x0F
-#define I2O_PARAMS_STATUS_WRONG_GROUP_TYPE 0x10
-
-/* DetailedStatusCode defines for Executive, DDM, Util and Transaction error
- * messages: Table 3-2 Detailed Status Codes.*/
-
-#define I2O_DSC_SUCCESS 0x0000
-#define I2O_DSC_BAD_KEY 0x0002
-#define I2O_DSC_TCL_ERROR 0x0003
-#define I2O_DSC_REPLY_BUFFER_FULL 0x0004
-#define I2O_DSC_NO_SUCH_PAGE 0x0005
-#define I2O_DSC_INSUFFICIENT_RESOURCE_SOFT 0x0006
-#define I2O_DSC_INSUFFICIENT_RESOURCE_HARD 0x0007
-#define I2O_DSC_CHAIN_BUFFER_TOO_LARGE 0x0009
-#define I2O_DSC_UNSUPPORTED_FUNCTION 0x000A
-#define I2O_DSC_DEVICE_LOCKED 0x000B
-#define I2O_DSC_DEVICE_RESET 0x000C
-#define I2O_DSC_INAPPROPRIATE_FUNCTION 0x000D
-#define I2O_DSC_INVALID_INITIATOR_ADDRESS 0x000E
-#define I2O_DSC_INVALID_MESSAGE_FLAGS 0x000F
-#define I2O_DSC_INVALID_OFFSET 0x0010
-#define I2O_DSC_INVALID_PARAMETER 0x0011
-#define I2O_DSC_INVALID_REQUEST 0x0012
-#define I2O_DSC_INVALID_TARGET_ADDRESS 0x0013
-#define I2O_DSC_MESSAGE_TOO_LARGE 0x0014
-#define I2O_DSC_MESSAGE_TOO_SMALL 0x0015
-#define I2O_DSC_MISSING_PARAMETER 0x0016
-#define I2O_DSC_TIMEOUT 0x0017
-#define I2O_DSC_UNKNOWN_ERROR 0x0018
-#define I2O_DSC_UNKNOWN_FUNCTION 0x0019
-#define I2O_DSC_UNSUPPORTED_VERSION 0x001A
-#define I2O_DSC_DEVICE_BUSY 0x001B
-#define I2O_DSC_DEVICE_NOT_AVAILABLE 0x001C
-
-/* DetailedStatusCode defines for Block Storage Operation: Table 6-7 Detailed
- Status Codes.*/
-
-#define I2O_BSA_DSC_SUCCESS 0x0000
-#define I2O_BSA_DSC_MEDIA_ERROR 0x0001
-#define I2O_BSA_DSC_ACCESS_ERROR 0x0002
-#define I2O_BSA_DSC_DEVICE_FAILURE 0x0003
-#define I2O_BSA_DSC_DEVICE_NOT_READY 0x0004
-#define I2O_BSA_DSC_MEDIA_NOT_PRESENT 0x0005
-#define I2O_BSA_DSC_MEDIA_LOCKED 0x0006
-#define I2O_BSA_DSC_MEDIA_FAILURE 0x0007
-#define I2O_BSA_DSC_PROTOCOL_FAILURE 0x0008
-#define I2O_BSA_DSC_BUS_FAILURE 0x0009
-#define I2O_BSA_DSC_ACCESS_VIOLATION 0x000A
-#define I2O_BSA_DSC_WRITE_PROTECTED 0x000B
-#define I2O_BSA_DSC_DEVICE_RESET 0x000C
-#define I2O_BSA_DSC_VOLUME_CHANGED 0x000D
-#define I2O_BSA_DSC_TIMEOUT 0x000E
-
-/* FailureStatusCodes, Table 3-3 Message Failure Codes */
-
-#define I2O_FSC_TRANSPORT_SERVICE_SUSPENDED 0x81
-#define I2O_FSC_TRANSPORT_SERVICE_TERMINATED 0x82
-#define I2O_FSC_TRANSPORT_CONGESTION 0x83
-#define I2O_FSC_TRANSPORT_FAILURE 0x84
-#define I2O_FSC_TRANSPORT_STATE_ERROR 0x85
-#define I2O_FSC_TRANSPORT_TIME_OUT 0x86
-#define I2O_FSC_TRANSPORT_ROUTING_FAILURE 0x87
-#define I2O_FSC_TRANSPORT_INVALID_VERSION 0x88
-#define I2O_FSC_TRANSPORT_INVALID_OFFSET 0x89
-#define I2O_FSC_TRANSPORT_INVALID_MSG_FLAGS 0x8A
-#define I2O_FSC_TRANSPORT_FRAME_TOO_SMALL 0x8B
-#define I2O_FSC_TRANSPORT_FRAME_TOO_LARGE 0x8C
-#define I2O_FSC_TRANSPORT_INVALID_TARGET_ID 0x8D
-#define I2O_FSC_TRANSPORT_INVALID_INITIATOR_ID 0x8E
-#define I2O_FSC_TRANSPORT_INVALID_INITIATOR_CONTEXT 0x8F
-#define I2O_FSC_TRANSPORT_UNKNOWN_FAILURE 0xFF
-
-/* Device Claim Types */
-#define I2O_CLAIM_PRIMARY 0x01000000
-#define I2O_CLAIM_MANAGEMENT 0x02000000
-#define I2O_CLAIM_AUTHORIZED 0x03000000
-#define I2O_CLAIM_SECONDARY 0x04000000
-
-/* Message header defines for VersionOffset */
-#define I2OVER15 0x0001
-#define I2OVER20 0x0002
-
-/* Default is 1.5, FIXME: Need support for both 1.5 and 2.0 */
-#define I2OVERSION I2OVER15
-
-#define SGL_OFFSET_0 I2OVERSION
-#define SGL_OFFSET_4 (0x0040 | I2OVERSION)
-#define SGL_OFFSET_5 (0x0050 | I2OVERSION)
-#define SGL_OFFSET_6 (0x0060 | I2OVERSION)
-#define SGL_OFFSET_7 (0x0070 | I2OVERSION)
-#define SGL_OFFSET_8 (0x0080 | I2OVERSION)
-#define SGL_OFFSET_9 (0x0090 | I2OVERSION)
-#define SGL_OFFSET_10 (0x00A0 | I2OVERSION)
-
-#define TRL_OFFSET_5 (0x0050 | I2OVERSION)
-#define TRL_OFFSET_6 (0x0060 | I2OVERSION)
-
-/* Transaction Reply Lists (TRL) Control Word structure */
-#define TRL_SINGLE_FIXED_LENGTH 0x00
-#define TRL_SINGLE_VARIABLE_LENGTH 0x40
-#define TRL_MULTIPLE_FIXED_LENGTH 0x80
-
- /* msg header defines for MsgFlags */
-#define MSG_STATIC 0x0100
-#define MSG_64BIT_CNTXT 0x0200
-#define MSG_MULTI_TRANS 0x1000
-#define MSG_FAIL 0x2000
-#define MSG_FINAL 0x4000
-#define MSG_REPLY 0x8000
-
- /* minimum size msg */
-#define THREE_WORD_MSG_SIZE 0x00030000
-#define FOUR_WORD_MSG_SIZE 0x00040000
-#define FIVE_WORD_MSG_SIZE 0x00050000
-#define SIX_WORD_MSG_SIZE 0x00060000
-#define SEVEN_WORD_MSG_SIZE 0x00070000
-#define EIGHT_WORD_MSG_SIZE 0x00080000
-#define NINE_WORD_MSG_SIZE 0x00090000
-#define TEN_WORD_MSG_SIZE 0x000A0000
-#define ELEVEN_WORD_MSG_SIZE 0x000B0000
-#define I2O_MESSAGE_SIZE(x) ((x)<<16)
-
-/* Special TID Assignments */
-
-#define ADAPTER_TID 0
-#define HOST_TID 1
-
-#define MSG_FRAME_SIZE 128 /* i2o_scsi assumes >= 32 */
-#define REPLY_FRAME_SIZE 17
-#define SG_TABLESIZE 30
-#define NMBR_MSG_FRAMES 128
-
-#define MSG_POOL_SIZE (MSG_FRAME_SIZE*NMBR_MSG_FRAMES*sizeof(u32))
-
-#define I2O_POST_WAIT_OK 0
-#define I2O_POST_WAIT_TIMEOUT -ETIMEDOUT
-
-#define I2O_CONTEXT_LIST_MIN_LENGTH 15
-#define I2O_CONTEXT_LIST_USED 0x01
-#define I2O_CONTEXT_LIST_DELETED 0x02
-
-/* timeouts */
-#define I2O_TIMEOUT_INIT_OUTBOUND_QUEUE 15
-#define I2O_TIMEOUT_MESSAGE_GET 5
-#define I2O_TIMEOUT_RESET 30
-#define I2O_TIMEOUT_STATUS_GET 5
-#define I2O_TIMEOUT_LCT_GET 360
-#define I2O_TIMEOUT_SCSI_SCB_ABORT 240
-
-/* retries */
-#define I2O_HRT_GET_TRIES 3
-#define I2O_LCT_GET_TRIES 3
-
-/* request queue sizes */
-#define I2O_MAX_SECTORS 1024
-#define I2O_MAX_SEGMENTS 128
-
-#define I2O_REQ_MEMPOOL_SIZE 32
-