linux 2.6.16.38 w/ vs2.0.3-rc1

[linux-2.6.git] / sound / oss / Kconfig

diff --git a/sound/oss/Kconfig b/sound/oss/Kconfig
index 558c6ed..f69c6d5 100644 (file)
--- a/sound/oss/Kconfig
+++ b/sound/oss/Kconfig
@@ -5,9 +5,18 @@
 #
 # Prompt user for primary drivers.
 
 #
 # Prompt user for primary drivers.
 

+config OBSOLETE_OSS_DRIVER
+       bool "Obsolete OSS drivers"
+       depends on SOUND_PRIME
+       help
+         This option enables support for obsolete OSS drivers that
+         have been removed in kernel 2.6.17.
+
+         If unsure, say N.
+

 config SOUND_BT878
        tristate "BT878 audio dma"
 config SOUND_BT878
        tristate "BT878 audio dma"

-       depends on SOUND_PRIME && PCI
+       depends on SOUND_PRIME && PCI && OBSOLETE_OSS_DRIVER

        ---help---
          Audio DMA support for bt878 based grabber boards.  As you might have
          already noticed, bt878 is listed with two functions in /proc/pci.
        ---help---
          Audio DMA support for bt878 based grabber boards.  As you might have
          already noticed, bt878 is listed with two functions in /proc/pci.


@@ -21,9 +30,48 @@ config SOUND_BT878
          To compile this driver as a module, choose M here: the module will
          be called btaudio.
 
          To compile this driver as a module, choose M here: the module will
          be called btaudio.
 

+config SOUND_CMPCI
+       tristate "C-Media PCI (CMI8338/8738)"
+       depends on SOUND_PRIME && PCI && OBSOLETE_OSS_DRIVER
+       help
+         Say Y or M if you have a PCI sound card using the CMI8338
+         or the CMI8738 chipset.  Data on these chips are available at
+         <http://www.cmedia.com.tw/>.
+
+         A userspace utility to control some internal registers of these
+         chips is available at
+         <http://member.nifty.ne.jp/Breeze/softwares/unix/cmictl-e.html>.
+
+config SOUND_CMPCI_FM
+       bool "Enable legacy FM"
+       depends on SOUND_CMPCI && X86
+       help
+         Say Y here to enable the legacy FM (frequency-modulation) synthesizer
+         support on a card using the CMI8338 or CMI8378 chipset. Even it is
+         enabled, you need to set fmio as proper value to enable it.
+         Say N here if you don't need this.
+
+config SOUND_CMPCI_MIDI
+       bool "Enable legacy MPU-401"
+       depends on SOUND_CMPCI && X86
+       help
+         Say Y here to enable the legacy MPU401 MIDI synthesizer support on a
+         card using the CMI8338 or CMI8378 chipset. Even it is enabled,
+         you need to set mpuio as proper value to enable it.
+         Say N here if you don't need this.
+
+config SOUND_CMPCI_JOYSTICK
+       bool "Enable joystick"
+       depends on SOUND_CMPCI && X86 && (GAMEPORT=y || SOUND_CMPCI=GAMEPORT)
+       help
+         Say Y here in order to enable the joystick port on a sound card using
+         the CMI8338 or the CMI8738 chipset.  You need to config the
+         gameport support and set joystick parameter as 1 to use it.
+         Say N here if you don't need this.
+

 config SOUND_EMU10K1
        tristate "Creative SBLive! (EMU10K1)"
 config SOUND_EMU10K1
        tristate "Creative SBLive! (EMU10K1)"

-       depends on SOUND_PRIME && PCI
+       depends on SOUND_PRIME && PCI && OBSOLETE_OSS_DRIVER

        ---help---
          Say Y or M if you have a PCI sound card using the EMU10K1 chipset,
          such as the Creative SBLive!, SB PCI512 or Emu-APS.
        ---help---
          Say Y or M if you have a PCI sound card using the EMU10K1 chipset,
          such as the Creative SBLive!, SB PCI512 or Emu-APS.


@@ -55,6 +103,13 @@ config SOUND_FUSION
          series) when wired as native sound drivers with AC97 codecs.  If
          this driver does not work try the CS4232 driver.
 
          series) when wired as native sound drivers with AC97 codecs.  If
          this driver does not work try the CS4232 driver.
 

+config SOUND_CS4281
+       tristate "Crystal Sound CS4281"
+       depends on SOUND_PRIME && PCI && OBSOLETE_OSS_DRIVER
+       help
+         Picture and feature list at
+         <http://www.pcbroker.com/crystal4281.html>.
+

 config SOUND_BCM_CS4297A
        tristate "Crystal Sound CS4297a (for Swarm)"
        depends on SOUND_PRIME && SIBYTE_SWARM
 config SOUND_BCM_CS4297A
        tristate "Crystal Sound CS4297a (for Swarm)"
        depends on SOUND_PRIME && SIBYTE_SWARM


@@ -65,9 +120,22 @@ config SOUND_BCM_CS4297A
          note that CONFIG_KGDB should not be enabled at the same
          time, since it also attempts to use this UART port.
 
          note that CONFIG_KGDB should not be enabled at the same
          time, since it also attempts to use this UART port.
 

+config SOUND_ES1370
+       tristate "Ensoniq AudioPCI (ES1370)"
+       depends on SOUND_PRIME && PCI && OBSOLETE_OSS_DRIVER
+       help
+         Say Y or M if you have a PCI sound card utilizing the Ensoniq
+         ES1370 chipset, such as Ensoniq's AudioPCI (non-97). To find
+         out if your sound card uses an ES1370 without removing your
+         computer's cover, use lspci -n and look for the PCI ID
+         1274:5000. Since Ensoniq was bought by Creative Labs,
+         Sound Blaster 64/PCI models are either ES1370 or ES1371 based.
+         This driver differs slightly from OSS/Free, so PLEASE READ
+         <file:Documentation/sound/oss/es1370>.
+

 config SOUND_ES1371
        tristate "Creative Ensoniq AudioPCI 97 (ES1371)"
 config SOUND_ES1371
        tristate "Creative Ensoniq AudioPCI 97 (ES1371)"

-       depends on SOUND_PRIME && PCI
+       depends on SOUND_PRIME && PCI && OBSOLETE_OSS_DRIVER

        help
          Say Y or M if you have a PCI sound card utilizing the Ensoniq
          ES1371 chipset, such as Ensoniq's AudioPCI97. To find out if
        help
          Say Y or M if you have a PCI sound card utilizing the Ensoniq
          ES1371 chipset, such as Ensoniq's AudioPCI97. To find out if


@@ -78,6 +146,33 @@ config SOUND_ES1371
          slightly from OSS/Free, so PLEASE READ
          <file:Documentation/sound/oss/es1371>.
 
          slightly from OSS/Free, so PLEASE READ
          <file:Documentation/sound/oss/es1371>.
 

+config SOUND_ESSSOLO1
+       tristate "ESS Technology Solo1" 
+       depends on SOUND_PRIME && PCI && OBSOLETE_OSS_DRIVER
+       help
+         Say Y or M if you have a PCI sound card utilizing the ESS Technology
+         Solo1 chip. To find out if your sound card uses a
+         Solo1 chip without removing your computer's cover, use
+         lspci -n and look for the PCI ID 125D:1969. This driver
+         differs slightly from OSS/Free, so PLEASE READ
+         <file:Documentation/sound/oss/solo1>.
+
+config SOUND_MAESTRO
+       tristate "ESS Maestro, Maestro2, Maestro2E driver"
+       depends on SOUND_PRIME && PCI && OBSOLETE_OSS_DRIVER
+       help
+         Say Y or M if you have a sound system driven by ESS's Maestro line
+         of PCI sound chips.  These include the Maestro 1, Maestro 2, and
+         Maestro 2E.  See <file:Documentation/sound/oss/Maestro> for more
+         details.
+
+config SOUND_MAESTRO3
+       tristate "ESS Maestro3/Allegro driver (EXPERIMENTAL)"
+       depends on SOUND_PRIME && PCI && EXPERIMENTAL && OBSOLETE_OSS_DRIVER
+       help
+         Say Y or M if you have a sound system driven by ESS's Maestro 3
+         PCI sound chip.
+

 config SOUND_ICH
        tristate "Intel ICH (i8xx) audio support"
        depends on SOUND_PRIME && PCI
 config SOUND_ICH
        tristate "Intel ICH (i8xx) audio support"
        depends on SOUND_PRIME && PCI


@@ -85,6 +180,24 @@ config SOUND_ICH
          Support for integral audio in Intel's I/O Controller Hub (ICH)
          chipset, as used on the 810/820/840 motherboards.
 
          Support for integral audio in Intel's I/O Controller Hub (ICH)
          chipset, as used on the 810/820/840 motherboards.
 

+config SOUND_HARMONY
+       tristate "PA Harmony audio driver"
+       depends on GSC_LASI && SOUND_PRIME && OBSOLETE_OSS_DRIVER
+       help
+         Say 'Y' or 'M' to include support for Harmony soundchip
+         on HP 712, 715/new and many other GSC based machines.
+
+config SOUND_SONICVIBES
+       tristate "S3 SonicVibes"
+       depends on SOUND_PRIME && PCI && OBSOLETE_OSS_DRIVER
+       help
+         Say Y or M if you have a PCI sound card utilizing the S3
+         SonicVibes chipset. To find out if your sound card uses a
+         SonicVibes chip without removing your computer's cover, use
+         lspci -n and look for the PCI ID 5333:CA00. This driver
+         differs slightly from OSS/Free, so PLEASE READ
+         <file:Documentation/sound/oss/sonicvibes>.
+

 config SOUND_VWSND
        tristate "SGI Visual Workstation Sound"
        depends on SOUND_PRIME && X86_VISWS
 config SOUND_VWSND
        tristate "SGI Visual Workstation Sound"
        depends on SOUND_PRIME && X86_VISWS


@@ -113,6 +226,10 @@ config SOUND_VRC5477
          integrated, multi-function controller chip for MIPS CPUs.  Works
          with the AC97 codec.
 
          integrated, multi-function controller chip for MIPS CPUs.  Works
          with the AC97 codec.
 

+config SOUND_AU1000
+       tristate "Au1000 Sound"
+       depends on SOUND_PRIME && (SOC_AU1000 || SOC_AU1100 || SOC_AU1500) && OBSOLETE_OSS_DRIVER
+

 config SOUND_AU1550_AC97
        tristate "Au1550 AC97 Sound"
        depends on SOUND_PRIME && SOC_AU1550
 config SOUND_AU1550_AC97
        tristate "Au1550 AC97 Sound"
        depends on SOUND_PRIME && SOC_AU1550


@@ -385,7 +502,7 @@ config MSND_FIFOSIZE
 
 config SOUND_VIA82CXXX
        tristate "VIA 82C686 Audio Codec"
 
 config SOUND_VIA82CXXX
        tristate "VIA 82C686 Audio Codec"

-       depends on SOUND_PRIME && PCI
+       depends on SOUND_PRIME && PCI && OBSOLETE_OSS_DRIVER

        help
          Say Y here to include support for the audio codec found on VIA
          82Cxxx-based chips. Typically these are built into a motherboard.
        help
          Say Y here to include support for the audio codec found on VIA
          82Cxxx-based chips. Typically these are built into a motherboard.


@@ -454,6 +571,18 @@ config SOUND_AD1889
          Say M here if you have a sound card based on the Analog Devices
          AD1889 chip.
 
          Say M here if you have a sound card based on the Analog Devices
          AD1889 chip.
 

+config SOUND_SGALAXY
+       tristate "Aztech Sound Galaxy (non-PnP) cards"
+       depends on SOUND_OSS && OBSOLETE_OSS_DRIVER
+       help
+         This module initializes the older non Plug and Play sound galaxy
+         cards from Aztech. It supports the Waverider Pro 32 - 3D and the
+         Galaxy Washington 16.
+
+         If you compile the driver into the kernel, you have to add
+         "sgalaxy=<io>,<irq>,<dma>,<dma2>,<sgbase>" to the kernel command
+         line.
+

 config SOUND_ADLIB
        tristate "Adlib Cards"
        depends on SOUND_OSS
 config SOUND_ADLIB
        tristate "Adlib Cards"
        depends on SOUND_OSS


@@ -480,7 +609,7 @@ config SOUND_ACI_MIXER
 
 config SOUND_CS4232
        tristate "Crystal CS4232 based (PnP) cards"
 
 config SOUND_CS4232
        tristate "Crystal CS4232 based (PnP) cards"

-       depends on SOUND_OSS
+       depends on SOUND_OSS && OBSOLETE_OSS_DRIVER

        help
          Say Y here if you have a card based on the Crystal CS4232 chip set,
          which uses its own Plug and Play protocol.
        help
          Say Y here if you have a card based on the Crystal CS4232 chip set,
          which uses its own Plug and Play protocol.


@@ -492,6 +621,42 @@ config SOUND_CS4232
          See <file:Documentation/sound/oss/CS4232> for more information on
          configuring this card.
 
          See <file:Documentation/sound/oss/CS4232> for more information on
          configuring this card.
 

+config SOUND_SSCAPE
+       tristate "Ensoniq SoundScape support"
+       depends on SOUND_OSS
+       help
+         Answer Y if you have a sound card based on the Ensoniq SoundScape
+         chipset. Such cards are being manufactured at least by Ensoniq, Spea
+         and Reveal (Reveal makes also other cards).
+
+         If you compile the driver into the kernel, you have to add
+         "sscape=<io>,<irq>,<dma>,<mpuio>,<mpuirq>" to the kernel command
+         line.
+
+config SOUND_GUS
+       tristate "Gravis Ultrasound support"
+       depends on SOUND_OSS && OBSOLETE_OSS_DRIVER
+       help
+         Say Y here for any type of Gravis Ultrasound card, including the GUS
+         or GUS MAX.  See also <file:Documentation/sound/oss/ultrasound> for more
+         information on configuring this card with modules.
+
+         If you compile the driver into the kernel, you have to add
+         "gus=<io>,<irq>,<dma>,<dma2>" to the kernel command line.
+
+config SOUND_GUS16
+       bool "16 bit sampling option of GUS (_NOT_ GUS MAX)"
+       depends on SOUND_GUS
+       help
+         Support for Gravis Ulstrasound (GUS) cards (other than the GUS),
+         sampling at 16-bit width.
+
+config SOUND_GUSMAX
+       bool "GUS MAX support"
+       depends on SOUND_GUS
+       help
+         Support for Gravis Ulstrasound MAX.
+

 config SOUND_VMIDI
        tristate "Loopback MIDI device support"
        depends on SOUND_OSS
 config SOUND_VMIDI
        tristate "Loopback MIDI device support"
        depends on SOUND_OSS


@@ -572,7 +737,7 @@ config SOUND_MPU401
 
 config SOUND_NM256
        tristate "NM256AV/NM256ZX audio support"
 
 config SOUND_NM256
        tristate "NM256AV/NM256ZX audio support"

-       depends on SOUND_OSS
+       depends on SOUND_OSS && OBSOLETE_OSS_DRIVER

        help
          Say M here to include audio support for the NeoMagic 256AV/256ZX
          chipsets. These are the audio chipsets found in the Sony
        help
          Say M here to include audio support for the NeoMagic 256AV/256ZX
          chipsets. These are the audio chipsets found in the Sony


@@ -582,6 +747,35 @@ config SOUND_NM256
 
          See <file:Documentation/sound/oss/NM256> for further information.
 
 
          See <file:Documentation/sound/oss/NM256> for further information.
 

+config SOUND_MAD16
+       tristate "OPTi MAD16 and/or Mozart based cards"
+       depends on SOUND_OSS && OBSOLETE_OSS_DRIVER
+       ---help---
+         Answer Y if your card has a Mozart (OAK OTI-601) or MAD16 (OPTi
+         82C928 or 82C929 or 82C931) audio interface chip. These chips are
+         quite common so it's possible that many no-name cards have one of
+         them. In addition the MAD16 chip is used in some cards made by known
+         manufacturers such as Turtle Beach (Tropez), Reveal (some models)
+         and Diamond (latest ones). Note however that the Tropez sound cards
+         have their own driver; if you have one of those, say N here and Y or
+         M to "Full support for Turtle Beach WaveFront", below.
+
+         If you compile the driver into the kernel, you have to add
+         "mad16=<io>,<irq>,<dma>,<dma2>,<mpuio>,<mpuirq>" to the
+         kernel command line.
+
+         See also <file:Documentation/sound/oss/Opti> and
+         <file:Documentation/sound/oss/MAD16> for more information on setting
+         these cards up as modules.
+
+config MAD16_OLDCARD
+       bool "Support MIDI in older MAD16 based cards (requires SB)"
+       depends on SOUND_MAD16
+       help
+         Answer Y (or M) if you have an older card based on the C928 or
+         Mozart chipset and you want to have MIDI support. If you enable this
+         option you also need to enable support for Sound Blaster.
+

 config SOUND_PAS
        tristate "ProAudioSpectrum 16 support"
        depends on SOUND_OSS
 config SOUND_PAS
        tristate "ProAudioSpectrum 16 support"
        depends on SOUND_OSS


@@ -674,9 +868,53 @@ config SOUND_SB
          You can say M here to compile this driver as a module; the module is
          called sb.
 
          You can say M here to compile this driver as a module; the module is
          called sb.
 

+config SOUND_AWE32_SYNTH
+       tristate "AWE32 synth"
+       depends on SOUND_OSS && OBSOLETE_OSS_DRIVER
+       help
+         Say Y here if you have a Sound Blaster SB32, AWE32-PnP, SB AWE64 or
+         similar sound card. See <file:Documentation/sound/oss/README.awe>,
+         <file:Documentation/sound/oss/AWE32> and the Soundblaster-AWE
+         mini-HOWTO, available from <http://www.tldp.org/docs.html#howto>
+         for more info.
+
+config SOUND_WAVEFRONT
+       tristate "Full support for Turtle Beach WaveFront (Tropez Plus, Tropez, Maui) synth/soundcards"
+       depends on SOUND_OSS && m && OBSOLETE_OSS_DRIVER
+       help
+         Answer Y or M if you have a Tropez Plus, Tropez or Maui sound card
+         and read the files <file:Documentation/sound/oss/Wavefront> and
+         <file:Documentation/sound/oss/Tropez+>.
+
+config SOUND_MAUI
+       tristate "Limited support for Turtle Beach Wave Front (Maui, Tropez) synthesizers"
+       depends on SOUND_OSS && OBSOLETE_OSS_DRIVER
+       help
+         Say Y here if you have a Turtle Beach Wave Front, Maui, or Tropez
+         sound card.
+
+         If you compile the driver into the kernel, you have to add
+         "maui=<io>,<irq>" to the kernel command line.
+
+config MAUI_HAVE_BOOT
+       bool "Have OSWF.MOT firmware file"
+       depends on SOUND_MAUI=y && !STANDALONE
+       help
+         Turtle Beach Maui and Tropez sound cards have a microcontroller
+         which needs to be initialized prior to use. OSWF.MOT is a file
+         distributed with the card's DOS/Windows drivers. Answer Y if you
+         have this file.
+
+config MAUI_BOOT_FILE
+       string "Full pathname of OSWF.MOT firmware file"
+       depends on MAUI_HAVE_BOOT
+       default "/etc/sound/oswf.mot"
+       help
+         Enter the full pathname of your OSWF.MOT file, starting from /.
+

 config SOUND_YM3812
        tristate "Yamaha FM synthesizer (YM3812/OPL-3) support"
 config SOUND_YM3812
        tristate "Yamaha FM synthesizer (YM3812/OPL-3) support"

-       depends on SOUND_OSS
+       depends on SOUND_OSS && OBSOLETE_OSS_DRIVER

        ---help---
          Answer Y if your card has a FM chip made by Yamaha (OPL2/OPL3/OPL4).
          Answering Y is usually a safe and recommended choice, however some
        ---help---
          Answer Y if your card has a FM chip made by Yamaha (OPL2/OPL3/OPL4).
          Answering Y is usually a safe and recommended choice, however some


@@ -690,6 +928,18 @@ config SOUND_YM3812
 
          If unsure, say Y.
 
 
          If unsure, say Y.
 

+config SOUND_OPL3SA1
+       tristate "Yamaha OPL3-SA1 audio controller"
+       depends on SOUND_OSS && OBSOLETE_OSS_DRIVER
+       help
+         Say Y or M if you have a Yamaha OPL3-SA1 sound chip, which is
+         usually built into motherboards. Read
+         <file:Documentation/sound/oss/OPL3-SA> for details.
+
+         If you compile the driver into the kernel, you have to add
+         "opl3sa=<io>,<irq>,<dma>,<dma2>,<mpuio>,<mpuirq>" to the kernel
+         command line.
+

 config SOUND_OPL3SA2
        tristate "Yamaha OPL3-SA2 and SA3 based PnP cards"
        depends on SOUND_OSS
 config SOUND_OPL3SA2
        tristate "Yamaha OPL3-SA2 and SA3 based PnP cards"
        depends on SOUND_OSS


@@ -704,6 +954,19 @@ config SOUND_OPL3SA2
          "opl3sa2=<io>,<irq>,<dma>,<dma2>,<mssio>,<mpuio>" to the kernel
          command line.
 
          "opl3sa2=<io>,<irq>,<dma>,<dma2>,<mssio>,<mpuio>" to the kernel
          command line.
 

+config SOUND_YMFPCI
+       tristate "Yamaha YMF7xx PCI audio (native mode)"
+       depends on SOUND_OSS && PCI && OBSOLETE_OSS_DRIVER
+       help
+         Support for Yamaha cards including the YMF711, YMF715, YMF718,
+         YMF719, YMF724, Waveforce 192XG, and Waveforce 192 Digital.
+
+config SOUND_YMFPCI_LEGACY
+       bool "Yamaha PCI legacy ports support"
+       depends on SOUND_YMFPCI
+       help
+         Support for YMF7xx PCI cards emulating an MP401.
+

 config SOUND_UART6850
        tristate "6850 UART support"
        depends on SOUND_OSS
 config SOUND_UART6850
        tristate "6850 UART support"
        depends on SOUND_OSS


@@ -833,6 +1096,30 @@ config SOUND_KAHLUA
        tristate "XpressAudio Sound Blaster emulation"
        depends on SOUND_SB
 
        tristate "XpressAudio Sound Blaster emulation"
        depends on SOUND_SB
 

+config SOUND_ALI5455
+       tristate "ALi5455 audio support"
+       depends on SOUND_PRIME && PCI && OBSOLETE_OSS_DRIVER
+
+config SOUND_FORTE
+       tristate "ForteMedia FM801 driver"
+       depends on SOUND_PRIME && PCI && OBSOLETE_OSS_DRIVER
+       help
+         Say Y or M if you want driver support for the ForteMedia FM801 PCI
+         audio controller (Abit AU10, Genius Sound Maker, HP Workstation
+         zx2000, and others).
+
+config SOUND_RME96XX
+       tristate "RME Hammerfall (RME96XX) support"
+       depends on SOUND_PRIME && PCI && OBSOLETE_OSS_DRIVER
+       help
+         Say Y or M if you have a Hammerfall or Hammerfall light
+         multichannel card from RME. If you want to access advanced
+         features of the card, read <file:Documentation/sound/oss/rme96xx>.
+
+config SOUND_AD1980
+       tristate "AD1980 front/back switch plugin"
+       depends on SOUND_PRIME && OBSOLETE_OSS_DRIVER
+

 config SOUND_SH_DAC_AUDIO
        tristate "SuperH DAC audio support"
        depends on SOUND_PRIME && CPU_SH3
 config SOUND_SH_DAC_AUDIO
        tristate "SuperH DAC audio support"
        depends on SOUND_PRIME && CPU_SH3