Video issues with S3 resume
~~~~~~~~~~~~~~~~~~~~~~~~~~~
- 2003-2004, Pavel Machek
+ 2003-2006, Pavel Machek
During S3 resume, hardware needs to be reinitialized. For most
devices, this is easy, and kernel driver knows how to do
driver -- vesafb and vgacon are widely used).
This is not problem for swsusp, because during swsusp resume, BIOS is
-run normally so video card is normally initialized.
+run normally so video card is normally initialized. It should not be
+problem for S1 standby, because hardware should retain its state over
+that.
-There are three types of systems where video works after S3 resume:
+We either have to run video BIOS during early resume, or interpret it
+using vbetool later, or maybe nothing is neccessary on particular
+system because video state is preserved. Unfortunately different
+methods work on different systems, and no known method suits all of
+them.
-* systems where video state is preserved over S3. (Athlon HP Omnibook xe3s)
+Userland application called s2ram has been developed; it contains long
+whitelist of systems, and automatically selects working method for a
+given system. It can be downloaded from CVS at
+www.sf.net/projects/suspend . If you get a system that is not in the
+whitelist, please try to find a working solution, and submit whitelist
+entry so that work does not need to be repeated.
-* systems that initialize video card into vga text mode and where BIOS
- works well enough to be able to set video mode. Use
- acpi_sleep=s3_mode on these. (Toshiba 4030cdt)
+Currently, VBE_SAVE method (6 below) works on most
+systems. Unfortunately, vbetool only runs after userland is resumed,
+so it makes debugging of early resume problems
+hard/impossible. Methods that do not rely on userland are preferable.
-* systems where it is possible to call video bios during S3
- resume. Unfortunately, it is not correct to call video BIOS at that
- point, but it happens to work on some machines. Use
- acpi_sleep=s3_bios (Athlon64 desktop system)
+Details
+~~~~~~~
-* radeon systems, where X can soft-boot your video card. You'll need
- patched X, and plain text console (no vesafb or radeonfb), see
- http://www.doesi.gmxhome.de/linux/tm800s3/s3.html. (Acer TM 800)
+There are a few types of systems where video works after S3 resume:
-* radeon systems, where X can soft-boot your video card. You'll need
- patched X, and plain text console (no vesafb or radeonfb), see
- http://www.doesi.gmxhome.de/linux/tm800s3/s3.html. (Acer TM 800)
+(1) systems where video state is preserved over S3.
+
+(2) systems where it is possible to call the video BIOS during S3
+ resume. Unfortunately, it is not correct to call the video BIOS at
+ that point, but it happens to work on some machines. Use
+ acpi_sleep=s3_bios.
+
+(3) systems that initialize video card into vga text mode and where
+ the BIOS works well enough to be able to set video mode. Use
+ acpi_sleep=s3_mode on these.
+
+(4) on some systems s3_bios kicks video into text mode, and
+ acpi_sleep=s3_bios,s3_mode is needed.
+
+(5) radeon systems, where X can soft-boot your video card. You'll need
+ a new enough X, and a plain text console (no vesafb or radeonfb). See
+ http://www.doesi.gmxhome.de/linux/tm800s3/s3.html for more information.
+ Alternatively, you should use vbetool (6) instead.
+
+(6) other radeon systems, where vbetool is enough to bring system back
+ to life. It needs text console to be working. Do vbetool vbestate
+ save > /tmp/delme; echo 3 > /proc/acpi/sleep; vbetool post; vbetool
+ vbestate restore < /tmp/delme; setfont <whatever>, and your video
+ should work.
+
+(7) on some systems, it is possible to boot most of kernel, and then
+ POSTing bios works. Ole Rohne has patch to do just that at
+ http://dev.gentoo.org/~marineam/patch-radeonfb-2.6.11-rc2-mm2.
+
+(8) on some systems, you can use the video_post utility mentioned here:
+ http://bugzilla.kernel.org/show_bug.cgi?id=3670. Do echo 3 > /sys/power/state
+ && /usr/sbin/video_post - which will initialize the display in console mode.
+ If you are in X, you can switch to a virtual terminal and back to X using
+ CTRL+ALT+F1 - CTRL+ALT+F7 to get the display working in graphical mode again.
Now, if you pass acpi_sleep=something, and it does not work with your
-bios, you'll get hard crash during resume. Be carefull.
+bios, you'll get a hard crash during resume. Be careful. Also it is
+safest to do your experiments with plain old VGA console. The vesafb
+and radeonfb (etc) drivers have a tendency to crash the machine during
+resume.
-You may have system where none of above works. At that point you
+You may have a system where none of above works. At that point you
either invent another ugly hack that works, or write proper driver for
your video card (good luck getting docs :-(). Maybe suspending from X
(proper X, knowing your hardware, not XF68_FBcon) might have better
chance of working.
+
+Table of known working notebooks:
+
+Model hack (or "how to do it")
+------------------------------------------------------------------------------
+Acer Aspire 1406LC ole's late BIOS init (7), turn off DRI
+Acer TM 242FX vbetool (6)
+Acer TM C110 video_post (8)
+Acer TM C300 vga=normal (only suspend on console, not in X), vbetool (6) or video_post (8)
+Acer TM 4052LCi s3_bios (2)
+Acer TM 636Lci s3_bios,s3_mode (4)
+Acer TM 650 (Radeon M7) vga=normal plus boot-radeon (5) gets text console back
+Acer TM 660 ??? (*)
+Acer TM 800 vga=normal, X patches, see webpage (5) or vbetool (6)
+Acer TM 803 vga=normal, X patches, see webpage (5) or vbetool (6)
+Acer TM 803LCi vga=normal, vbetool (6)
+Arima W730a vbetool needed (6)
+Asus L2400D s3_mode (3)(***) (S1 also works OK)
+Asus L3350M (SiS 740) (6)
+Asus L3800C (Radeon M7) s3_bios (2) (S1 also works OK)
+Asus M6887Ne vga=normal, s3_bios (2), use radeon driver instead of fglrx in x.org
+Athlon64 desktop prototype s3_bios (2)
+Compal CL-50 ??? (*)
+Compaq Armada E500 - P3-700 none (1) (S1 also works OK)
+Compaq Evo N620c vga=normal, s3_bios (2)
+Dell 600m, ATI R250 Lf none (1), but needs xorg-x11-6.8.1.902-1
+Dell D600, ATI RV250 vga=normal and X, or try vbestate (6)
+Dell D610 vga=normal and X (possibly vbestate (6) too, but not tested)
+Dell Inspiron 4000 ??? (*)
+Dell Inspiron 500m ??? (*)
+Dell Inspiron 510m ???
+Dell Inspiron 600m ??? (*)
+Dell Inspiron 8200 ??? (*)
+Dell Inspiron 8500 ??? (*)
+Dell Inspiron 8600 ??? (*)
+eMachines athlon64 machines vbetool needed (6) (someone please get me model #s)
+HP NC6000 s3_bios, may not use radeonfb (2); or vbetool (6)
+HP NX7000 ??? (*)
+HP Pavilion ZD7000 vbetool post needed, need open-source nv driver for X
+HP Omnibook XE3 athlon version none (1)
+HP Omnibook XE3GC none (1), video is S3 Savage/IX-MV
+HP Omnibook 5150 none (1), (S1 also works OK)
+IBM TP T20, model 2647-44G none (1), video is S3 Inc. 86C270-294 Savage/IX-MV, vesafb gets "interesting" but X work.
+IBM TP A31 / Type 2652-M5G s3_mode (3) [works ok with BIOS 1.04 2002-08-23, but not at all with BIOS 1.11 2004-11-05 :-(]
+IBM TP R32 / Type 2658-MMG none (1)
+IBM TP R40 2722B3G ??? (*)
+IBM TP R50p / Type 1832-22U s3_bios (2)
+IBM TP R51 none (1)
+IBM TP T30 236681A ??? (*)
+IBM TP T40 / Type 2373-MU4 none (1)
+IBM TP T40p none (1)
+IBM TP R40p s3_bios (2)
+IBM TP T41p s3_bios (2), switch to X after resume
+IBM TP T42 s3_bios (2)
+IBM ThinkPad T42p (2373-GTG) s3_bios (2)
+IBM TP X20 ??? (*)
+IBM TP X30 s3_bios, s3_mode (4)
+IBM TP X31 / Type 2672-XXH none (1), use radeontool (http://fdd.com/software/radeon/) to turn off backlight.
+IBM TP X32 none (1), but backlight is on and video is trashed after long suspend. s3_bios,s3_mode (4) works too. Perhaps that gets better results?
+IBM Thinkpad X40 Type 2371-7JG s3_bios,s3_mode (4)
+IBM TP 600e none(1), but a switch to console and back to X is needed
+Medion MD4220 ??? (*)
+Samsung P35 vbetool needed (6)
+Sharp PC-AR10 (ATI rage) none (1), backlight does not switch off
+Sony Vaio PCG-C1VRX/K s3_bios (2)
+Sony Vaio PCG-F403 ??? (*)
+Sony Vaio PCG-GRT995MP none (1), works with 'nv' X driver
+Sony Vaio PCG-GR7/K none (1), but needs radeonfb, use radeontool (http://fdd.com/software/radeon/) to turn off backlight.
+Sony Vaio PCG-N505SN ??? (*)
+Sony Vaio vgn-s260 X or boot-radeon can init it (5)
+Sony Vaio vgn-S580BH vga=normal, but suspend from X. Console will be blank unless you return to X.
+Sony Vaio vgn-FS115B s3_bios (2),s3_mode (4)
+Toshiba Libretto L5 none (1)
+Toshiba Portege 3020CT s3_mode (3)
+Toshiba Satellite 4030CDT s3_mode (3) (S1 also works OK)
+Toshiba Satellite 4080XCDT s3_mode (3) (S1 also works OK)
+Toshiba Satellite 4090XCDT ??? (*)
+Toshiba Satellite P10-554 s3_bios,s3_mode (4)(****)
+Toshiba M30 (2) xor X with nvidia driver using internal AGP
+Uniwill 244IIO ??? (*)
+
+Known working desktop systems
+~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+
+Mainboard Graphics card hack (or "how to do it")
+------------------------------------------------------------------------------
+Asus A7V8X nVidia RIVA TNT2 model 64 s3_bios,s3_mode (4)
+
+
+(*) from http://www.ubuntulinux.org/wiki/HoaryPMResults, not sure
+ which options to use. If you know, please tell me.
+
+(***) To be tested with a newer kernel.
+
+(****) Not with SMP kernel, UP only.
git://git.onelab.eu / linux-2.6.git / blobdiff