This module supports up to 8 cards and autoprobe.
+ Module snd-atiixp-modem
+ -----------------------
+
+ Module for ATI IXP 150/200/250 AC97 modem controllers.
+
+ Module supports up to 8 cards.
+
Module snd-au8810, snd-au8820, snd-au8830
-----------------------------------------
* Creative Card w/Digital out + Digital I/O 2 [0x0fc3/0x1f0f]
* Creative Card w/Digital CD in + Digital I/O 2 [0x0fcf/0x1f0f]
* Creative Card 5.1/w Digital out + LiveDrive [0x3fc3/0x1fff]
- * Creative Card all ins and outs [0x3fff/0x1fff]
+ * Creative Card 5.1 (c) 2003 [0x3fc3/0x7cff]
+ * Creative Card all ins and outs [0x3fff/0x7fff]
Module snd-ens1370
------------------
Module for ForteMedia FM801 based PCI soundcards.
+ tea575x_tuner - Enable TEA575x tuner
+ - 1 = MediaForte 256-PCS
+ - 2 = MediaForte 256-PCPR
+ - 3 = MediaForte 64-PCR
+ - High 16-bits are video (radio) device number + 1
+ - example: 0x10002 (MediaForte 256-PCPR, device 1)
+
Module supports up to 8 cards and autoprobe.
Module snd-gusclassic
* Hoontech SoundTrack DSP 24 Media 7.1
* Digigram VX442
+ model - Use the given board model, one of the following:
+ delta1010, dio2496, delta66, delta44, audiophile, delta410,
+ delta1010lt, vx442, ewx2496, ews88mt, ews88mt_new, ews88d,
+ dmx6fire, dsp24, dsp24_value, dsp24_71, ez8
omni - Omni I/O support for MidiMan M-Audio Delta44/66
cs8427_timeout - reset timeout for the CS8427 chip (S/PDIF transciever)
in msec resolution, default value is 500 (0.5 sec)
* AMP Ltd AUDIO2000
* TerraTec Aureon Sky-5.1, Space-7.1
+ model - Use the given board model, one of the following:
+ revo71, amp2000, prodigy71, aureon51, aureon71,
+ k8x800
+
Module supports up to 8 cards and autoprobe.
Module snd-intel8x0
2 = swap headphone and master controls
3 = for AD1985, turn on OMS bit and use headphone
4 = for ALC65x, turn on the jack sense mode
+ buggy_irq - Enable workaround for buggy interrupts on some
+ motherboards (default off)
Module supports autoprobe and multiple bus-master chips (max 8).
Module supports autoprobe and multiple chips (max 8).
+ The power-management is supported.
+
Note: on some notebooks the buffer address cannot be detected
automatically, or causes hang-up during initialization.
In such a case, specify the buffer top address explicity via
Sony F270: buffer_top=0x272800
The driver supports only ac97 codec. It's possible to force
to initialize/use ac97 although it's not detected. In such a
- case, use force_ac97=1 option.
-
- The power-management is supported.
+ case, use force_ac97=1 option - but *NO* guarantee whether it
+ works!
+
+ Note: The NM256 chip can be linked internally with non-AC97
+ codecs. This driver supports only the AC97 codec, and won't work
+ with machines with other (most likely CS423x or OPL3SAx) chips,
+ even though the device is detected in lspci. In such a case, try
+ other drivers, e.g. snd-cs4232 or snd-opl3sa2. Some has ISA-PnP
+ but some doesn't have ISA PnP. You'll need to speicfy isapnp=0
+ and proper hardware parameters in the case without ISA PnP.
+
+ Note: This driver is really crappy. It's a porting from the
+ OSS driver, which is a result of black-magic reverse engineering.
+ The detection of codec will fail if the driver is loaded *after*
+ X-server as described above. You might be able to force to load
+ the module, but it may result in hang-up. Hence, make sure that
+ you load this module *before* X if you encounter this kind of
+ problem.
Module snd-opl3sa2
------------------
This module supports up to 8 cards, autoprobe and hotplugging.
+ Module snd-usb-usx2y
+ --------------------
+
+ Module for Tascam USB US-122, US-224 and US-428 devices.
+
+ This module supports up to 8 cards, autoprobe and hotplugging.
+
+ Note: you need to load the firmware via usx2yloader utility included
+ in alsa-tools and alsa-firmware packages.
+
Module snd-via82xx
------------------