Fedora kernel-2.6.17-1.2142_FC4 patched with stable patch-2.6.17.4-vs2.0.2-rc26.diff

[linux-2.6.git] / Documentation / video4linux / bttv / README

diff --git a/Documentation/video4linux/bttv/README b/Documentation/video4linux/bttv/README
index 8719b42..7ca2154 100644 (file)
--- a/Documentation/video4linux/bttv/README
+++ b/Documentation/video4linux/bttv/README
@@ -22,7 +22,7 @@ very likely specified the wrong (or no) card type.  A list of supported
 cards is in CARDLIST.bttv
 
 If bttv takes very long to load (happens sometimes with the cheap
-cards which have no tuner), try adding this to your modprobe.conf:
+cards which have no tuner), try adding this to your modules.conf:
        options i2c-algo-bit bit_test=1
 
 For the WinTV/PVR you need one firmware file from the driver CD:
@@ -42,9 +42,9 @@ bttv uses the PCI Subsystem ID to autodetect the card type.  lspci lists
 the Subsystem ID in the second line, looks like this:
 
 00:0a.0 Multimedia video controller: Brooktree Corporation Bt878 (rev 02)
-        Subsystem: Hauppauge computer works Inc. WinTV/GO
-        Flags: bus master, medium devsel, latency 32, IRQ 5
-        Memory at e2000000 (32-bit, prefetchable) [size=4K]
+       Subsystem: Hauppauge computer works Inc. WinTV/GO
+       Flags: bus master, medium devsel, latency 32, IRQ 5
+       Memory at e2000000 (32-bit, prefetchable) [size=4K]
 
 only bt878-based cards can have a subsystem ID (which does not mean
 that every card really has one).  bt848 cards can't have a Subsystem