VERSION = 2
PATCHLEVEL = 6
-SUBLEVEL = 10
-EXTRAVERSION = -1.14_FC2.1.planetlab
-NAME=AC 1
+SUBLEVEL = 20
+EXTRAVERSION = -1.2949.fc6.vs2.2.0.1
+NAME = Homicidal Dwarf Hamster
# *DOCUMENTATION*
# To see a list of typical targets execute "make help"
# Comments in this file are targeted only to the developer, do not
# expect to learn how to build the kernel reading this file.
-# Do not print "Entering directory ..."
-MAKEFLAGS += --no-print-directory
+# Do not:
+# o use make's built-in rules and variables
+# (this increases performance and avoid hard-to-debug behavour);
+# o print "Entering directory ...";
+MAKEFLAGS += -rR --no-print-directory
# We are using a recursive build, so we need to do a little thinking
# to get the ordering right.
#
# Most importantly: sub-Makefiles should only ever modify files in
# their own directory. If in some directory we have a dependency on
-# a file in another dir (which doesn't happen often, but it's of
+# a file in another dir (which doesn't happen often, but it's often
# unavoidable when linking the built-in.o targets which finally
# turn into vmlinux), we will call a sub make in that other dir, and
# after that we are sure that everything which is in that other dir
KBUILD_VERBOSE = 0
endif
-# Call sparse as part of compilation of C files
-# Use 'make C=1' to enable sparse checking
+# Call a source code checker (by default, "sparse") as part of the
+# C compilation.
+#
+# Use 'make C=1' to enable checking of only re-compiled files.
+# Use 'make C=2' to enable checking of *all* source files, regardless
+# of whether they are re-compiled or not.
+#
+# See the file "Documentation/sparse.txt" for more details, including
+# where to get the "sparse" utility.
ifdef C
ifeq ("$(origin C)", "command line")
# kbuild supports saving output files in a separate directory.
-# To locate output files in a separate directory two syntax'es are supported.
+# To locate output files in a separate directory two syntaxes are supported.
# In both cases the working directory must be the root of the kernel src.
# 1) O=
# Use "make O=dir/to/store/output/files/"
-#
+#
# 2) Set KBUILD_OUTPUT
# Set the environment variable KBUILD_OUTPUT to point to the directory
# where the output files shall be placed.
# export KBUILD_OUTPUT=dir/to/store/output/files/
# make
#
-# The O= assigment takes precedence over the KBUILD_OUTPUT environment variable.
+# The O= assignment takes precedence over the KBUILD_OUTPUT environment
+# variable.
# KBUILD_SRC is set on invocation of make in OBJ directory
endif
# That's our default target when none is given on the command line
-.PHONY: _all
+PHONY := _all
_all:
ifneq ($(KBUILD_OUTPUT),)
$(if $(KBUILD_OUTPUT),, \
$(error output directory "$(saved-output)" does not exist))
-.PHONY: $(MAKECMDGOALS)
+PHONY += $(MAKECMDGOALS)
$(filter-out _all,$(MAKECMDGOALS)) _all:
- $(if $(KBUILD_VERBOSE:1=),@)$(MAKE) -C $(KBUILD_OUTPUT) \
- KBUILD_SRC=$(CURDIR) KBUILD_VERBOSE=$(KBUILD_VERBOSE) \
- KBUILD_CHECK=$(KBUILD_CHECK) KBUILD_EXTMOD="$(KBUILD_EXTMOD)" \
- -f $(CURDIR)/Makefile $@
+ $(if $(KBUILD_VERBOSE:1=),@)$(MAKE) -C $(KBUILD_OUTPUT) \
+ KBUILD_SRC=$(CURDIR) \
+ KBUILD_EXTMOD="$(KBUILD_EXTMOD)" -f $(CURDIR)/Makefile $@
# Leave processing to above invocation of make
skip-makefile := 1
# If building an external module we do not care about the all: rule
# but instead _all depend on modules
-.PHONY: all
+PHONY += all
ifeq ($(KBUILD_EXTMOD),)
_all: all
else
src := $(srctree)
obj := $(objtree)
-VPATH := $(srctree)
+VPATH := $(srctree)$(if $(KBUILD_EXTMOD),:$(KBUILD_EXTMOD))
export srctree objtree VPATH TOPDIR
-nullstring :=
-space := $(nullstring) # end of line
-
-# Take the contents of any files called localversion* and the config
-# variable CONFIG_LOCALVERSION and append them to KERNELRELEASE. Be
-# careful not to include files twice if building in the source
-# directory. LOCALVERSION from the command line override all of this
-
-ifeq ($(objtree),$(srctree))
-localversion-files := $(wildcard $(srctree)/localversion*)
-else
-localversion-files := $(wildcard $(objtree)/localversion* $(srctree)/localversion*)
-endif
-
-LOCALVERSION = $(subst $(space),, \
- $(shell cat /dev/null $(localversion-files:%~=)) \
- $(patsubst "%",%,$(CONFIG_LOCALVERSION)))
-
-KERNELRELEASE=$(VERSION).$(PATCHLEVEL).$(SUBLEVEL)$(EXTRAVERSION)$(LOCALVERSION)
# SUBARCH tells the usermode build what the underlying arch is. That is set
# first, and if a usermode build is happening, the "ARCH=um" on the command
SUBARCH := $(shell uname -m | sed -e s/i.86/i386/ -e s/sun4u/sparc64/ \
-e s/arm.*/arm/ -e s/sa110/arm/ \
- -e s/s390x/s390/ -e s/parisc64/parisc/ )
+ -e s/s390x/s390/ -e s/parisc64/parisc/ \
+ -e s/ppc.*/powerpc/ -e s/mips.*/mips/ )
# Cross compiling and selecting different set of gcc/bin-utils
# ---------------------------------------------------------------------------
# Architecture as present in compile.h
UTS_MACHINE := $(ARCH)
+KCONFIG_CONFIG ?= .config
+
# SHELL used by kbuild
CONFIG_SHELL := $(shell if [ -x "$$BASH" ]; then echo $$BASH; \
else if [ -x /bin/bash ]; then echo /bin/bash; \
else echo sh; fi ; fi)
-HOSTCC = gcc
-HOSTCXX = g++
-HOSTCFLAGS = -Wall -Wstrict-prototypes -O2 -fomit-frame-pointer
-HOSTCXXFLAGS = -O2
+HOSTCC = gcc
+HOSTCXX = g++
+HOSTCFLAGS = -Wall -Wstrict-prototypes -O2 -fomit-frame-pointer
+HOSTCXXFLAGS = -O2
-# Decide whether to build built-in, modular, or both.
-# Normally, just do built-in.
+# Decide whether to build built-in, modular, or both.
+# Normally, just do built-in.
KBUILD_MODULES :=
KBUILD_BUILTIN := 1
# If we have only "make modules", don't compile built-in objects.
# When we're building modules with modversions, we need to consider
# the built-in objects during the descend as well, in order to
-# make sure the checksums are uptodate before we record them.
+# make sure the checksums are up to date before we record them.
ifeq ($(MAKECMDGOALS),modules)
KBUILD_BUILTIN := $(if $(CONFIG_MODVERSIONS),1)
KBUILD_MODULES := 1
endif
-export KBUILD_MODULES KBUILD_BUILTIN KBUILD_VERBOSE
+export KBUILD_MODULES KBUILD_BUILTIN
export KBUILD_CHECKSRC KBUILD_SRC KBUILD_EXTMOD
# Beautify output
#
# If $(quiet) is empty, the whole command will be printed.
# If it is set to "quiet_", only the short version will be printed.
-# If it is set to "silent_", nothing wil be printed at all, since
+# If it is set to "silent_", nothing will be printed at all, since
# the variable $(silent_cmd_cc_o_c) doesn't exist.
#
-# A simple variant is to prefix commands with $(Q) - that's usefull
+# A simple variant is to prefix commands with $(Q) - that's useful
# for commands that shall be hidden in non-verbose mode.
#
# $(Q)ln $@ :<
export quiet Q KBUILD_VERBOSE
-######
-# cc support functions to be used (only) in arch/$(ARCH)/Makefile
-# See documentation in Documentation/kbuild/makefiles.txt
-
-# cc-option
-# Usage: cflags-y += $(call gcc-option, -march=winchip-c6, -march=i586)
-
-cc-option = $(shell if $(CC) $(CFLAGS) $(1) -S -o /dev/null -xc /dev/null \
- > /dev/null 2>&1; then echo "$(1)"; else echo "$(2)"; fi ;)
-
-# For backward compatibility
-check_gcc = $(warning check_gcc is deprecated - use cc-option) \
- $(call cc-option, $(1),$(2))
-
-# cc-option-yn
-# Usage: flag := $(call gcc-option-yn, -march=winchip-c6)
-cc-option-yn = $(shell if $(CC) $(CFLAGS) $(1) -S -o /dev/null -xc /dev/null \
- > /dev/null 2>&1; then echo "y"; else echo "n"; fi;)
-
-# cc-option-align
-# Prefix align with either -falign or -malign
-cc-option-align = $(subst -functions=0,,\
- $(call cc-option,-falign-functions=0,-malign-functions=0))
-
-# cc-version
-# Usage gcc-ver := $(call cc-version $(CC))
-cc-version = $(shell $(CONFIG_SHELL) $(srctree)/scripts/gcc-version.sh \
- $(if $(1), $(1), $(CC)))
-
# Look for make include files relative to root of kernel src
MAKEFLAGS += --include-dir=$(srctree)
-# For maximum performance (+ possibly random breakage, uncomment
-# the following)
-
-#MAKEFLAGS += -rR
+# We need some generic definitions.
+include $(srctree)/scripts/Kbuild.include
# Make variables (CC, etc...)
KALLSYMS = scripts/kallsyms
PERL = perl
CHECK = sparse
-CHECKFLAGS := -D__linux__ -Dlinux -D__STDC__ -Dunix -D__unix__
+
+CHECKFLAGS := -D__linux__ -Dlinux -D__STDC__ -Dunix -D__unix__ -Wbitwise $(CF)
MODFLAGS = -DMODULE
CFLAGS_MODULE = $(MODFLAGS)
AFLAGS_MODULE = $(MODFLAGS)
CFLAGS_KERNEL =
AFLAGS_KERNEL =
-NOSTDINC_FLAGS = -nostdinc -iwithprefix include
# Use LINUXINCLUDE when you must reference the include/ directory.
# Needed to be compatible with the O= option
LINUXINCLUDE := -Iinclude \
- $(if $(KBUILD_SRC),-Iinclude2 -I$(srctree)/include)
+ $(if $(KBUILD_SRC),-Iinclude2 -I$(srctree)/include) \
+ -include include/linux/autoconf.h
CPPFLAGS := -D__KERNEL__ $(LINUXINCLUDE)
-CFLAGS := -Wall -Wstrict-prototypes -Wno-trigraphs \
- -fno-strict-aliasing -fno-common
-AFLAGS := -D__ASSEMBLY__
+CFLAGS := -Wall -Wundef -Wstrict-prototypes -Wno-trigraphs \
+ -fno-strict-aliasing -fno-common -Wstrict-prototypes -Wundef -Werror-implicit-function-declaration
+AFLAGS := -D__ASSEMBLY__
+
+# Read KERNELRELEASE from include/config/kernel.release (if it exists)
+KERNELRELEASE = $(shell cat include/config/kernel.release 2> /dev/null)
+KERNELVERSION = $(VERSION).$(PATCHLEVEL).$(SUBLEVEL)$(EXTRAVERSION)
-export VERSION PATCHLEVEL SUBLEVEL EXTRAVERSION LOCALVERSION KERNELRELEASE \
- ARCH CONFIG_SHELL HOSTCC HOSTCFLAGS CROSS_COMPILE AS LD CC \
- CPP AR NM STRIP OBJCOPY OBJDUMP MAKE AWK GENKSYMS PERL UTS_MACHINE \
- HOSTCXX HOSTCXXFLAGS LDFLAGS_MODULE CHECK CHECKFLAGS
+export VERSION PATCHLEVEL SUBLEVEL KERNELRELEASE KERNELVERSION
+export ARCH CONFIG_SHELL HOSTCC HOSTCFLAGS CROSS_COMPILE AS LD CC
+export CPP AR NM STRIP OBJCOPY OBJDUMP MAKE AWK GENKSYMS PERL UTS_MACHINE
+export HOSTCXX HOSTCXXFLAGS LDFLAGS_MODULE CHECK CHECKFLAGS
export CPPFLAGS NOSTDINC_FLAGS LINUXINCLUDE OBJCOPYFLAGS LDFLAGS
-export CFLAGS CFLAGS_KERNEL CFLAGS_MODULE
+export CFLAGS CFLAGS_KERNEL CFLAGS_MODULE
export AFLAGS AFLAGS_KERNEL AFLAGS_MODULE
# When compiling out-of-tree modules, put MODVERDIR in the module
# even be read-only.
export MODVERDIR := $(if $(KBUILD_EXTMOD),$(firstword $(KBUILD_EXTMOD))/).tmp_versions
-# The temporary file to save gcc -MD generated dependencies must not
-# contain a comma
-comma := ,
-depfile = $(subst $(comma),_,$(@D)/.$(@F).d)
-
# Files to ignore in find ... statements
-RCS_FIND_IGNORE := \( -name SCCS -o -name BitKeeper -o -name .svn -o -name CVS -o -name .pc \) -prune -o
-RCS_TAR_IGNORE := --exclude SCCS --exclude BitKeeper --exclude .svn --exclude CVS --exclude .pc
+RCS_FIND_IGNORE := \( -name SCCS -o -name BitKeeper -o -name .svn -o -name CVS -o -name .pc -o -name .hg -o -name .git \) -prune -o
+export RCS_TAR_IGNORE := --exclude SCCS --exclude BitKeeper --exclude .svn --exclude CVS --exclude .pc --exclude .hg --exclude .git
# ===========================================================================
# Rules shared between *config targets and build targets
# Basic helpers built in scripts/
-.PHONY: scripts_basic
+PHONY += scripts_basic
scripts_basic:
$(Q)$(MAKE) $(build)=scripts/basic
-.PHONY: outputmakefile
-# outputmakefile generate a Makefile to be placed in output directory, if
-# using a seperate output directory. This allows convinient use
-# of make in output directory
+# To avoid any implicit rule to kick in, define an empty command.
+scripts/basic/%: scripts_basic ;
+
+PHONY += outputmakefile
+# outputmakefile generates a Makefile in the output directory, if using a
+# separate output directory. This allows convenient use of make in the
+# output directory.
outputmakefile:
- $(Q)if /usr/bin/env test ! $(srctree) -ef $(objtree); then \
- $(CONFIG_SHELL) $(srctree)/scripts/mkmakefile \
- $(srctree) $(objtree) $(VERSION) $(PATCHLEVEL) \
- > $(objtree)/Makefile; \
- echo ' GEN $(objtree)/Makefile'; \
- fi
+ifneq ($(KBUILD_SRC),)
+ $(Q)$(CONFIG_SHELL) $(srctree)/scripts/mkmakefile \
+ $(srctree) $(objtree) $(VERSION) $(PATCHLEVEL)
+endif
# To make sure we do not include .config for any of the *config targets
# catch them early, and hand them over to scripts/kconfig/Makefile
# It is allowed to specify more targets when calling make, including
# mixing *config targets and build targets.
-# For example 'make oldconfig all'.
+# For example 'make oldconfig all'.
# Detect when mixed targets is specified, and make a second invocation
# of make so .config is not included in this case either (for *config).
no-dot-config-targets := clean mrproper distclean \
- cscope TAGS tags help %docs check%
+ cscope TAGS tags help %docs check% \
+ include/linux/version.h headers_% \
+ kernelrelease kernelversion
config-targets := 0
mixed-targets := 0
include $(srctree)/arch/$(ARCH)/Makefile
export KBUILD_DEFCONFIG
-config: scripts_basic outputmakefile FORCE
- $(Q)$(MAKE) $(build)=scripts/kconfig $@
-%config: scripts_basic outputmakefile FORCE
+config %config: scripts_basic outputmakefile FORCE
+ $(Q)mkdir -p include/linux include/config
$(Q)$(MAKE) $(build)=scripts/kconfig $@
else
ifeq ($(KBUILD_EXTMOD),)
# Additional helpers built in scripts/
# Carefully list dependencies so we do not try to build scripts twice
-# in parrallel
-.PHONY: scripts
-scripts: scripts_basic include/config/MARKER
+# in parallel
+PHONY += scripts
+scripts: scripts_basic include/config/auto.conf
$(Q)$(MAKE) $(build)=$(@)
-scripts_basic: include/linux/autoconf.h
-
# Objects we will link into vmlinux / subdirs we need to visit
init-y := init/
drivers-y := drivers/ sound/
endif # KBUILD_EXTMOD
ifeq ($(dot-config),1)
-# In this section, we need .config
+# Read in config
+-include include/config/auto.conf
+ifeq ($(KBUILD_EXTMOD),)
# Read in dependencies to all Kconfig* files, make sure to run
# oldconfig if changes are detected.
--include .config.cmd
-
-include .config
+-include include/config/auto.conf.cmd
-# If .config needs to be updated, it will be done via the dependency
-# that autoconf has on .config.
# To avoid any implicit rule to kick in, define an empty command
-.config: ;
+$(KCONFIG_CONFIG) include/config/auto.conf.cmd: ;
-# If .config is newer than include/linux/autoconf.h, someone tinkered
-# with it and forgot to run make oldconfig
-include/linux/autoconf.h: .config
+# If .config is newer than include/config/auto.conf, someone tinkered
+# with it and forgot to run make oldconfig.
+# if auto.conf.cmd is missing then we are probably in a cleaned tree so
+# we execute the config step to be sure to catch updated Kconfig files
+include/config/auto.conf: $(KCONFIG_CONFIG) include/config/auto.conf.cmd
$(Q)$(MAKE) -f $(srctree)/Makefile silentoldconfig
+else
+# external modules needs include/linux/autoconf.h and include/config/auto.conf
+# but do not care if they are up-to-date. Use auto.conf to trigger the test
+PHONY += include/config/auto.conf
+
+include/config/auto.conf:
+ $(Q)test -e include/linux/autoconf.h -a -e $@ || ( \
+ echo; \
+ echo " ERROR: Kernel configuration is invalid."; \
+ echo " include/linux/autoconf.h or $@ are missing."; \
+ echo " Run 'make oldconfig && make prepare' on kernel src to fix it."; \
+ echo; \
+ /bin/false)
+
+endif # KBUILD_EXTMOD
+
else
# Dummy target needed, because used as prerequisite
-include/linux/autoconf.h: ;
-endif
+include/config/auto.conf: ;
+endif # $(dot-config)
# The all: target is the default when no target is given on the
# command line.
# This allow a user to issue only 'make' to build a kernel including modules
-# Defaults vmlinux but it is usually overriden in the arch makefile
+# Defaults vmlinux but it is usually overridden in the arch makefile
all: vmlinux
ifdef CONFIG_CC_OPTIMIZE_FOR_SIZE
CFLAGS += -O2
endif
-#Add align options if CONFIG_CC_* is not equal to 0
-add-align = $(if $(filter-out 0,$($(1))),$(cc-option-align)$(2)=$($(1)))
-CFLAGS += $(call add-align,CONFIG_CC_ALIGN_FUNCTIONS,-functions)
-CFLAGS += $(call add-align,CONFIG_CC_ALIGN_LABELS,-labels)
-CFLAGS += $(call add-align,CONFIG_CC_ALIGN_LOOPS,-loops)
-CFLAGS += $(call add-align,CONFIG_CC_ALIGN_JUMPS,-jumps)
+include $(srctree)/arch/$(ARCH)/Makefile
ifdef CONFIG_FRAME_POINTER
-CFLAGS += -fno-omit-frame-pointer
+CFLAGS += -fno-omit-frame-pointer $(call cc-option,-fno-optimize-sibling-calls,)
else
CFLAGS += -fomit-frame-pointer
endif
-ifdef CONFIG_X86_STACK_CHECK
-CFLAGS += -p
-endif
-
ifdef CONFIG_DEBUG_INFO
CFLAGS += -g
endif
-include $(srctree)/arch/$(ARCH)/Makefile
+# Force gcc to behave correct even for buggy distributions
+CFLAGS += $(call cc-option, -fno-stack-protector)
+
+# arch Makefile may override CC so keep this after arch Makefile is included
+NOSTDINC_FLAGS += -nostdinc -isystem $(shell $(CC) -print-file-name=include)
+CHECKFLAGS += $(NOSTDINC_FLAGS)
# warn about C99 declaration after statement
CFLAGS += $(call cc-option,-Wdeclaration-after-statement,)
+# disable pointer signed / unsigned warnings in gcc 4.0
+CFLAGS += $(call cc-option,-Wno-pointer-sign,)
+
# Default kernel image to build when no specific target is given.
-# KBUILD_IMAGE may be overruled on the commandline or
+# KBUILD_IMAGE may be overruled on the command line or
# set in the environment
-# Also any assingments in arch/$(ARCH)/Makefiel take precedence over
+# Also any assignments in arch/$(ARCH)/Makefile take precedence over
# this default value
export KBUILD_IMAGE ?= vmlinux
#
# INSTALL_PATH specifies where to place the updated kernel and system map
-# images. Uncomment if you want to place them anywhere other than root.
-#
-
-#export INSTALL_PATH=/boot
+# images. Default is /boot, but you can set it to other values
+export INSTALL_PATH ?= /boot
#
# INSTALL_MOD_PATH specifies a prefix to MODLIB for module directory
# relocations required by build roots. This is not defined in the
-# makefile but the arguement can be passed to make if needed.
+# makefile but the argument can be passed to make if needed.
#
-MODLIB := $(INSTALL_MOD_PATH)/lib/modules/$(KERNELRELEASE)
+MODLIB = $(INSTALL_MOD_PATH)/lib/modules/$(KERNELRELEASE)
export MODLIB
+#
+# INSTALL_MOD_STRIP, if defined, will cause modules to be
+# stripped after they are installed. If INSTALL_MOD_STRIP is '1', then
+# the default option --strip-debug will be used. Otherwise,
+# INSTALL_MOD_STRIP will used as the options to the strip command.
+
+ifdef INSTALL_MOD_STRIP
+ifeq ($(INSTALL_MOD_STRIP),1)
+mod_strip_cmd = $(STRIP) --strip-debug
+else
+mod_strip_cmd = $(STRIP) $(INSTALL_MOD_STRIP)
+endif # INSTALL_MOD_STRIP=1
+else
+mod_strip_cmd = true
+endif # INSTALL_MOD_STRIP
+export mod_strip_cmd
+
ifeq ($(KBUILD_EXTMOD),)
-core-y += kernel/ mm/ fs/ ipc/ security/ crypto/
+core-y += kernel/ mm/ fs/ ipc/ security/ crypto/ block/
vmlinux-dirs := $(patsubst %/,%,$(filter %/, $(init-y) $(init-m) \
$(core-y) $(core-m) $(drivers-y) $(drivers-m) \
# Build vmlinux
# ---------------------------------------------------------------------------
-# vmlinux is build from the objects selected by $(vmlinux-init) and
+# vmlinux is built from the objects selected by $(vmlinux-init) and
# $(vmlinux-main). Most are built-in.o files from top-level directories
# in the kernel tree, others are specified in arch/$(ARCH)Makefile.
# Ordering when linking is important, and $(vmlinux-init) must be first.
# Generate new vmlinux version
quiet_cmd_vmlinux_version = GEN .version
cmd_vmlinux_version = set -e; \
- . $(srctree)/scripts/mkversion > .tmp_version; \
- mv -f .tmp_version .version; \
+ if [ ! -r .version ]; then \
+ rm -f .version; \
+ echo 1 >.version; \
+ else \
+ mv .version .old_version; \
+ expr 0$$(cat .old_version) + 1 >.version; \
+ fi; \
$(MAKE) $(build)=init
# Generate System.map
-quiet_cmd_sysmap = SYSMAP
+quiet_cmd_sysmap = SYSMAP
cmd_sysmap = $(CONFIG_SHELL) $(srctree)/scripts/mksysmap
# Link of vmlinux
# If CONFIG_KALLSYMS is set .version is already updated
# Generate System.map and verify that the content is consistent
-
+# Use + in front of the vmlinux_version rule to silent warning with make -j2
+# First command is ':' to allow us to use + in front of the rule
define rule_vmlinux__
+ :
$(if $(CONFIG_KALLSYMS),,+$(call cmd,vmlinux_version))
$(call cmd,vmlinux__)
$(Q)echo 'cmd_$@ := $(cmd_vmlinux__)' > $(@D)/.$(@F).cmd
- $(Q)$(if $($(quiet)cmd_sysmap), \
- echo ' $($(quiet)cmd_sysmap) System.map' &&) \
- $(cmd_sysmap) $@ System.map; \
- if [ $$? -ne 0 ]; then \
- rm -f $@; \
- /bin/false; \
+ $(Q)$(if $($(quiet)cmd_sysmap), \
+ echo ' $($(quiet)cmd_sysmap) System.map' &&) \
+ $(cmd_sysmap) $@ System.map; \
+ if [ $$? -ne 0 ]; then \
+ rm -f $@; \
+ /bin/false; \
fi;
$(verify_kallsyms)
endef
kallsyms.o := .tmp_kallsyms$(last_kallsyms).o
define verify_kallsyms
- $(Q)$(if $($(quiet)cmd_sysmap), \
- echo ' $($(quiet)cmd_sysmap) .tmp_System.map' &&) \
+ $(Q)$(if $($(quiet)cmd_sysmap), \
+ echo ' $($(quiet)cmd_sysmap) .tmp_System.map' &&) \
$(cmd_sysmap) .tmp_vmlinux$(last_kallsyms) .tmp_System.map
- $(Q)cmp -s System.map .tmp_System.map || \
- (echo Inconsistent kallsyms data; \
- echo Try setting CONFIG_KALLSYMS_EXTRA_PASS; \
+ $(Q)cmp -s System.map .tmp_System.map || \
+ (echo Inconsistent kallsyms data; \
+ echo Try setting CONFIG_KALLSYMS_EXTRA_PASS; \
rm .tmp_kallsyms* ; /bin/false )
endef
# Update vmlinux version before link
# Use + in front of this rule to silent warning about make -j1
+# First command is ':' to allow us to use + in front of this rule
cmd_ksym_ld = $(cmd_vmlinux__)
define rule_ksym_ld
+ :
+$(call cmd,vmlinux_version)
$(call cmd,vmlinux__)
$(Q)echo 'cmd_$@ := $(cmd_vmlinux__)' > $(@D)/.$(@F).cmd
# Needs to visit scripts/ before $(KALLSYMS) can be used.
$(KALLSYMS): scripts ;
+# Generate some data for debugging strange kallsyms problems
+debug_kallsyms: .tmp_map$(last_kallsyms)
+
+.tmp_map%: .tmp_vmlinux% FORCE
+ ($(OBJDUMP) -h $< | $(AWK) '/^ +[0-9]/{print $$4 " 0 " $$2}'; $(NM) $<) | sort > $@
+
+.tmp_map3: .tmp_map2
+
+.tmp_map2: .tmp_map1
+
endif # ifdef CONFIG_KALLSYMS
# vmlinux image - including updated kernel symbols
vmlinux: $(vmlinux-lds) $(vmlinux-init) $(vmlinux-main) $(kallsyms.o) FORCE
+ifdef CONFIG_HEADERS_CHECK
+ $(Q)$(MAKE) -f $(srctree)/Makefile headers_check
+endif
$(call if_changed_rule,vmlinux__)
+ $(Q)$(MAKE) -f $(srctree)/scripts/Makefile.modpost $@
+ $(Q)rm -f .old_version
# The actual objects are generated when descending,
# make sure no implicit rule kicks in
# make menuconfig etc.
# Error messages still appears in the original language
-.PHONY: $(vmlinux-dirs)
-$(vmlinux-dirs): prepare-all scripts
+PHONY += $(vmlinux-dirs)
+$(vmlinux-dirs): prepare scripts
$(Q)$(MAKE) $(build)=$@
+# Build the kernel release string
+#
+# The KERNELRELEASE value built here is stored in the file
+# include/config/kernel.release, and is used when executing several
+# make targets, such as "make install" or "make modules_install."
+#
+# The eventual kernel release string consists of the following fields,
+# shown in a hierarchical format to show how smaller parts are concatenated
+# to form the larger and final value, with values coming from places like
+# the Makefile, kernel config options, make command line options and/or
+# SCM tag information.
+#
+# $(KERNELVERSION)
+# $(VERSION) eg, 2
+# $(PATCHLEVEL) eg, 6
+# $(SUBLEVEL) eg, 18
+# $(EXTRAVERSION) eg, -rc6
+# $(localver-full)
+# $(localver)
+# localversion* (all localversion* files)
+# $(CONFIG_LOCALVERSION) (from kernel config setting)
+# $(localver-auto) (only if CONFIG_LOCALVERSION_AUTO is set)
+# ./scripts/setlocalversion (SCM tag, if one exists)
+# $(LOCALVERSION) (from make command line if provided)
+#
+# Note how the final $(localver-auto) string is included *only* if the
+# kernel config option CONFIG_LOCALVERSION_AUTO is selected. Also, at the
+# moment, only git is supported but other SCMs can edit the script
+# scripts/setlocalversion and add the appropriate checks as needed.
+
+nullstring :=
+space := $(nullstring) # end of line
+
+___localver = $(objtree)/localversion* $(srctree)/localversion*
+__localver = $(sort $(wildcard $(___localver)))
+# skip backup files (containing '~')
+_localver = $(foreach f, $(__localver), $(if $(findstring ~, $(f)),,$(f)))
+
+localver = $(subst $(space),, \
+ $(shell cat /dev/null $(_localver)) \
+ $(patsubst "%",%,$(CONFIG_LOCALVERSION)))
+
+# If CONFIG_LOCALVERSION_AUTO is set scripts/setlocalversion is called
+# and if the SCM is know a tag from the SCM is appended.
+# The appended tag is determined by the SCM used.
+#
+# Currently, only git is supported.
+# Other SCMs can edit scripts/setlocalversion and add the appropriate
+# checks as needed.
+ifdef CONFIG_LOCALVERSION_AUTO
+ _localver-auto = $(shell $(CONFIG_SHELL) \
+ $(srctree)/scripts/setlocalversion $(srctree))
+ localver-auto = $(LOCALVERSION)$(_localver-auto)
+endif
+
+localver-full = $(localver)$(localver-auto)
+
+# Store (new) KERNELRELASE string in include/config/kernel.release
+kernelrelease = $(KERNELVERSION)$(localver-full)
+include/config/kernel.release: include/config/auto.conf FORCE
+ $(Q)rm -f $@
+ $(Q)echo $(kernelrelease) > $@
+
+
# Things we need to do before we recursively start building the kernel
-# or the modules are listed in "prepare-all".
-# A multi level approach is used. prepare1 is updated first, then prepare0.
-# prepare-all is the collection point for the prepare targets.
+# or the modules are listed in "prepare".
+# A multi level approach is used. prepareN is processed before prepareN-1.
+# archprepare is used in arch Makefiles and when processed asm symlink,
+# version.h and scripts_basic is processed / created.
-.PHONY: prepare-all prepare prepare0 prepare1 prepare2
+# Listed in dependency order
+PHONY += prepare archprepare prepare0 prepare1 prepare2 prepare3
-# prepare2 is used to check if we are building in a separate output directory,
+# prepare-all is deprecated, use prepare as valid replacement
+PHONY += prepare-all
+
+# prepare3 is used to check if we are building in a separate output directory,
# and if so do:
# 1) Check that make has not been executed in the kernel src $(srctree)
# 2) Create the include2 directory, used for the second asm symlink
-
-prepare2:
+prepare3: include/config/kernel.release
ifneq ($(KBUILD_SRC),)
@echo ' Using $(srctree) as source for kernel'
- $(Q)if [ -h $(srctree)/include/asm -o -f $(srctree)/.config ]; then \
+ $(Q)if [ -f $(srctree)/.config -o -d $(srctree)/include/config ]; then \
echo " $(srctree) is not clean, please run 'make mrproper'";\
echo " in the '$(srctree)' directory.";\
/bin/false; \
$(Q)ln -fsn $(srctree)/include/asm-$(ARCH) include2/asm
endif
-# prepare1 creates a makefile if using a separate output directory
-prepare1: prepare2 outputmakefile
+# prepare2 creates a makefile if using a separate output directory
+prepare2: prepare3 outputmakefile
-prepare0: prepare1 include/linux/version.h include/asm include/config/MARKER
+prepare1: prepare2 include/linux/version.h include/linux/utsrelease.h \
+ include/asm include/config/auto.conf
ifneq ($(KBUILD_MODULES),)
- $(Q)rm -rf $(MODVERDIR)
$(Q)mkdir -p $(MODVERDIR)
+ $(Q)rm -f $(MODVERDIR)/*
endif
+archprepare: prepare1 scripts_basic
+
+prepare0: archprepare FORCE
+ $(Q)$(MAKE) $(build)=.
+
# All the preparing..
-prepare-all: prepare0 prepare
+prepare prepare-all: prepare0
-# Leave this as default for preprocessing vmlinux.lds.S, which is now
-# done in arch/$(ARCH)/kernel/Makefile
+# Leave this as default for preprocessing vmlinux.lds.S, which is now
+# done in arch/$(ARCH)/kernel/Makefile
export CPPFLAGS_vmlinux.lds += -P -C -U$(ARCH)
-# Single targets
-# ---------------------------------------------------------------------------
-
-%.s: %.c scripts FORCE
- $(Q)$(MAKE) $(build)=$(@D) $@
-%.i: %.c scripts FORCE
- $(Q)$(MAKE) $(build)=$(@D) $@
-%.o: %.c scripts FORCE
- $(Q)$(MAKE) $(build)=$(@D) $@
-%/: scripts prepare FORCE
- $(Q)$(MAKE) KBUILD_MODULES=$(if $(CONFIG_MODULES),1) $(build)=$(@D)
-%.lst: %.c scripts FORCE
- $(Q)$(MAKE) $(build)=$(@D) $@
-%.s: %.S scripts FORCE
- $(Q)$(MAKE) $(build)=$(@D) $@
-%.o: %.S scripts FORCE
- $(Q)$(MAKE) $(build)=$(@D) $@
-
-# FIXME: The asm symlink changes when $(ARCH) changes. That's
-# hard to detect, but I suppose "make mrproper" is a good idea
-# before switching between archs anyway.
+# FIXME: The asm symlink changes when $(ARCH) changes. That's
+# hard to detect, but I suppose "make mrproper" is a good idea
+# before switching between archs anyway.
include/asm:
@echo ' SYMLINK $@ -> include/asm-$(ARCH)'
$(Q)if [ ! -d include ]; then mkdir -p include; fi;
@ln -fsn asm-$(ARCH) $@
-# Split autoconf.h into include/linux/config/*
-
-include/config/MARKER: include/linux/autoconf.h
- @echo ' SPLIT include/linux/autoconf.h -> include/config/*'
- @scripts/basic/split-include include/linux/autoconf.h include/config
- @touch $@
-
# Generate some files
# ---------------------------------------------------------------------------
# needs to be updated, so this check is forced on all builds
uts_len := 64
+define filechk_utsrelease.h
+ if [ `echo -n "$(KERNELRELEASE)" | wc -c ` -gt $(uts_len) ]; then \
+ echo '"$(KERNELRELEASE)" exceeds $(uts_len) characters' >&2; \
+ exit 1; \
+ fi; \
+ (echo \#define UTS_RELEASE \"$(KERNELRELEASE)\";)
+endef
define filechk_version.h
- if [ `echo -n "$(KERNELRELEASE)" | wc -c ` -gt $(uts_len) ]; then \
- echo '"$(KERNELRELEASE)" exceeds $(uts_len) characters' >&2; \
- exit 1; \
- fi; \
- (echo \#define UTS_RELEASE \"$(KERNELRELEASE)\"; \
- echo \#define LINUX_VERSION_CODE `expr $(VERSION) \\* 65536 + $(PATCHLEVEL) \\* 256 + $(SUBLEVEL)`; \
- echo '#define KERNEL_VERSION(a,b,c) (((a) << 16) + ((b) << 8) + (c))'; \
- )
+ (echo \#define LINUX_VERSION_CODE $(shell \
+ expr $(VERSION) \* 65536 + $(PATCHLEVEL) \* 256 + $(SUBLEVEL)); \
+ echo '#define KERNEL_VERSION(a,b,c) (((a) << 16) + ((b) << 8) + (c))';)
endef
include/linux/version.h: $(srctree)/Makefile FORCE
$(call filechk,version.h)
+include/linux/utsrelease.h: include/config/kernel.release FORCE
+ $(call filechk,utsrelease.h)
+
# ---------------------------------------------------------------------------
-.PHONY: depend dep
+PHONY += depend dep
depend dep:
@echo '*** Warning: make $@ is unnecessary now.'
+# ---------------------------------------------------------------------------
+# Kernel headers
+INSTALL_HDR_PATH=$(objtree)/usr
+export INSTALL_HDR_PATH
+
+HDRARCHES=$(filter-out generic,$(patsubst $(srctree)/include/asm-%/Kbuild,%,$(wildcard $(srctree)/include/asm-*/Kbuild)))
+
+PHONY += headers_install_all
+headers_install_all: include/linux/version.h scripts_basic FORCE
+ $(Q)$(MAKE) $(build)=scripts scripts/unifdef
+ $(Q)for arch in $(HDRARCHES); do \
+ $(MAKE) ARCH=$$arch -f $(srctree)/scripts/Makefile.headersinst obj=include BIASMDIR=-bi-$$arch ;\
+ done
+
+PHONY += headers_install
+headers_install: include/linux/version.h scripts_basic FORCE
+ @if [ ! -r $(srctree)/include/asm-$(ARCH)/Kbuild ]; then \
+ echo '*** Error: Headers not exportable for this architecture ($(ARCH))'; \
+ exit 1 ; fi
+ $(Q)$(MAKE) $(build)=scripts scripts/unifdef
+ $(Q)$(MAKE) -f $(srctree)/scripts/Makefile.headersinst obj=include
+
+PHONY += headers_check
+headers_check: headers_install
+ $(Q)$(MAKE) -f $(srctree)/scripts/Makefile.headersinst obj=include HDRCHECK=1
+
# ---------------------------------------------------------------------------
# Modules
ifdef CONFIG_MODULES
-# By default, build modules as well
+# By default, build modules as well
all: modules
# Build modules
-.PHONY: modules
+PHONY += modules
modules: $(vmlinux-dirs) $(if $(KBUILD_BUILTIN),vmlinux)
@echo ' Building modules, stage 2.';
- $(Q)$(MAKE) -rR -f $(srctree)/scripts/Makefile.modpost
+ $(Q)$(MAKE) -f $(srctree)/scripts/Makefile.modpost
# Target to prepare building external modules
-.PHONY: modules_prepare
-modules_prepare: prepare-all scripts
+PHONY += modules_prepare
+modules_prepare: prepare scripts
# Target to install modules
-.PHONY: modules_install
+PHONY += modules_install
modules_install: _modinst_ _modinst_post
-.PHONY: _modinst_
+PHONY += _modinst_
_modinst_:
- @if [ -z "`$(DEPMOD) -V | grep module-init-tools`" ]; then \
+ @if [ -z "`$(DEPMOD) -V 2>/dev/null | grep module-init-tools`" ]; then \
echo "Warning: you may need to install module-init-tools"; \
echo "See http://www.codemonkey.org.uk/docs/post-halloween-2.6.txt";\
sleep 1; \
rm -f $(MODLIB)/build ; \
ln -s $(objtree) $(MODLIB)/build ; \
fi
- $(Q)$(MAKE) -rR -f $(srctree)/scripts/Makefile.modinst
+ $(Q)$(MAKE) -f $(srctree)/scripts/Makefile.modinst
# If System.map exists, run depmod. This deliberately does not have a
# dependency on System.map since that would run the dependency tree on
else
depmod_opts := -b $(INSTALL_MOD_PATH) -r
endif
-.PHONY: _modinst_post
+PHONY += _modinst_post
_modinst_post: _modinst_
- if [ -r System.map ]; then $(DEPMOD) -ae -F System.map $(depmod_opts) $(KERNELRELEASE); fi
+ if [ -r System.map -a -x $(DEPMOD) ]; then $(DEPMOD) -ae -F System.map $(depmod_opts) $(KERNELRELEASE); fi
else # CONFIG_MODULES
endif # CONFIG_MODULES
-# Generate asm-offsets.h
-# ---------------------------------------------------------------------------
-
-define filechk_gen-asm-offsets
- (set -e; \
- echo "#ifndef __ASM_OFFSETS_H__"; \
- echo "#define __ASM_OFFSETS_H__"; \
- echo "/*"; \
- echo " * DO NOT MODIFY."; \
- echo " *"; \
- echo " * This file was generated by arch/$(ARCH)/Makefile"; \
- echo " *"; \
- echo " */"; \
- echo ""; \
- sed -ne "/^->/{s:^->\([^ ]*\) [\$$#]*\([^ ]*\) \(.*\):#define \1 \2 /* \3 */:; s:->::; p;}"; \
- echo ""; \
- echo "#endif" )
-endef
-
-
###
# Cleaning is done on three levels.
# make clean Delete most generated files
.tmp_kallsyms* .tmp_version .tmp_vmlinux* .tmp_System.map
# Directories & files removed with 'make mrproper'
-MRPROPER_DIRS += include/config include2
-MRPROPER_FILES += .config .config.old include/asm .version \
- include/linux/autoconf.h include/linux/version.h \
- Module.symvers tags TAGS cscope*
+MRPROPER_DIRS += include/config include2 usr/include
+MRPROPER_FILES += .config .config.old include/asm .version .old_version \
+ include/linux/autoconf.h include/linux/version.h \
+ include/linux/utsrelease.h \
+ Module.symvers tags TAGS cscope*
# clean - Delete most, but leave enough to build external modules
#
clean: rm-dirs := $(CLEAN_DIRS)
clean: rm-files := $(CLEAN_FILES)
-clean-dirs := $(addprefix _clean_,$(vmlinux-alldirs))
+clean-dirs := $(addprefix _clean_,$(srctree) $(vmlinux-alldirs))
-.PHONY: $(clean-dirs) clean archclean
+PHONY += $(clean-dirs) clean archclean
$(clean-dirs):
$(Q)$(MAKE) $(clean)=$(patsubst _clean_%,%,$@)
$(call cmd,rmdirs)
$(call cmd,rmfiles)
@find . $(RCS_FIND_IGNORE) \
- \( -name '*.[oas]' -o -name '*.ko' -o -name '.*.cmd' \
- -o -name '.*.d' -o -name '.*.tmp' -o -name '*.mod.c' \) \
+ \( -name '*.[oas]' -o -name '*.ko' -o -name '.*.cmd' \
+ -o -name '.*.d' -o -name '.*.tmp' -o -name '*.mod.c' \
+ -o -name '*.symtypes' \) \
-type f -print | xargs rm -f
# mrproper - Delete all generated files, including .config
mrproper: rm-files := $(wildcard $(MRPROPER_FILES))
mrproper-dirs := $(addprefix _mrproper_,Documentation/DocBook scripts)
-.PHONY: $(mrproper-dirs) mrproper archmrproper
+PHONY += $(mrproper-dirs) mrproper archmrproper
$(mrproper-dirs):
$(Q)$(MAKE) $(clean)=$(patsubst _mrproper_%,%,$@)
# distclean
#
-.PHONY: distclean
+PHONY += distclean
distclean: mrproper
@find $(srctree) $(RCS_FIND_IGNORE) \
- \( -name '*.orig' -o -name '*.rej' -o -name '*~' \
+ \( -name '*.orig' -o -name '*.rej' -o -name '*~' \
-o -name '*.bak' -o -name '#*#' -o -name '.*.orig' \
- -o -name '.*.rej' -o -size 0 \
+ -o -name '.*.rej' -o -size 0 \
-o -name '*%' -o -name '.*.cmd' -o -name 'core' \) \
-type f -print | xargs rm -f
# rpm target kept for backward compatibility
package-dir := $(srctree)/scripts/package
-.PHONY: %-pkg rpm
-
-%pkg: FORCE
- $(Q)$(MAKE) -f $(package-dir)/Makefile $@
-rpm: FORCE
- $(Q)$(MAKE) -f $(package-dir)/Makefile $@
+%pkg: include/config/kernel.release FORCE
+ $(Q)$(MAKE) $(build)=$(package-dir) $@
+rpm: include/config/kernel.release FORCE
+ $(Q)$(MAKE) $(build)=$(package-dir) $@
# Brief documentation of the typical targets used
help:
@echo 'Cleaning targets:'
- @echo ' clean - remove most generated files but keep the config'
- @echo ' mrproper - remove all generated files + config + various backup files'
+ @echo ' clean - Remove most generated files but keep the config and'
+ @echo ' enough build support to build external modules'
+ @echo ' mrproper - Remove all generated files + config + various backup files'
+ @echo ' distclean - mrproper + remove editor backup and patch files'
@echo ''
@echo 'Configuration targets:'
@$(MAKE) -f $(srctree)/scripts/kconfig/Makefile help
@echo ' all - Build all targets marked with [*]'
@echo '* vmlinux - Build the bare kernel'
@echo '* modules - Build all modules'
- @echo ' modules_install - Install all modules'
+ @echo ' modules_install - Install all modules to INSTALL_MOD_PATH (default: /)'
@echo ' dir/ - Build all files in dir and below'
@echo ' dir/file.[ois] - Build specified target only'
+ @echo ' dir/file.ko - Build module including final link'
@echo ' rpm - Build a kernel as an RPM package'
@echo ' tags/TAGS - Generate tags file for editors'
@echo ' cscope - Generate cscope index'
+ @echo ' kernelrelease - Output the release version string'
+ @echo ' kernelversion - Output the version stored in Makefile'
+ @if [ -r $(srctree)/include/asm-$(ARCH)/Kbuild ]; then \
+ echo ' headers_install - Install sanitised kernel headers to INSTALL_HDR_PATH'; \
+ echo ' (default: $(INSTALL_HDR_PATH))'; \
+ fi
@echo ''
@echo 'Static analysers'
- @echo ' buildcheck - List dangling references to vmlinux discarded sections'
- @echo ' and init sections from non-init sections'
@echo ' checkstack - Generate a list of stack hogs'
@echo ' namespacecheck - Name space analysis on compiled kernel'
+ @if [ -r $(srctree)/include/asm-$(ARCH)/Kbuild ]; then \
+ echo ' headers_check - Sanity check on exported headers'; \
+ fi
@echo ''
@echo 'Kernel packaging:'
- @$(MAKE) -f $(package-dir)/Makefile help
+ @$(MAKE) $(build)=$(package-dir) help
@echo ''
@echo 'Documentation targets:'
@$(MAKE) -f $(srctree)/Documentation/DocBook/Makefile dochelp
echo '')
@echo ' make V=0|1 [targets] 0 => quiet build (default), 1 => verbose build'
+ @echo ' make V=2 [targets] 2 => give reason for rebuild of target'
@echo ' make O=dir [targets] Locate all output files in "dir", including .config'
- @echo ' make C=1 [targets] Check all c source with $$CHECK (sparse)'
- @echo ' make C=2 [targets] Force check of all c source with $$CHECK (sparse)'
+ @echo ' make C=1 [targets] Check all c source with $$CHECK (sparse by default)'
+ @echo ' make C=2 [targets] Force check of all c source with $$CHECK'
@echo ''
@echo 'Execute "make" or "make all" to build all targets marked with [*] '
@echo 'For further info see the ./README file'
# make M=dir modules Make all modules in specified dir
# make M=dir Same as 'make M=dir modules'
# make M=dir modules_install
-# Install the modules build in the module directory
+# Install the modules built in the module directory
# Assumes install directory is already created
# We are always building modules
KBUILD_MODULES := 1
-.PHONY: crmodverdir
+PHONY += crmodverdir
crmodverdir:
$(Q)mkdir -p $(MODVERDIR)
+ $(Q)rm -f $(MODVERDIR)/*
+
+PHONY += $(objtree)/Module.symvers
+$(objtree)/Module.symvers:
+ @test -e $(objtree)/Module.symvers || ( \
+ echo; \
+ echo " WARNING: Symbol version dump $(objtree)/Module.symvers"; \
+ echo " is missing; modules will have no dependencies and modversions."; \
+ echo )
module-dirs := $(addprefix _module_,$(KBUILD_EXTMOD))
-.PHONY: $(module-dirs) modules
-$(module-dirs): crmodverdir
+PHONY += $(module-dirs) modules
+$(module-dirs): crmodverdir $(objtree)/Module.symvers
$(Q)$(MAKE) $(build)=$(patsubst _module_%,%,$@)
modules: $(module-dirs)
@echo ' Building modules, stage 2.';
- $(Q)$(MAKE) -rR -f $(srctree)/scripts/Makefile.modpost
-
-.PHONY: modules_install
-modules_install:
- $(Q)$(MAKE) -rR -f $(srctree)/scripts/Makefile.modinst
+ $(Q)$(MAKE) -f $(srctree)/scripts/Makefile.modpost
+
+PHONY += modules_install
+modules_install: _emodinst_ _emodinst_post
+
+install-dir := $(if $(INSTALL_MOD_DIR),$(INSTALL_MOD_DIR),extra)
+PHONY += _emodinst_
+_emodinst_:
+ $(Q)mkdir -p $(MODLIB)/$(install-dir)
+ $(Q)$(MAKE) -f $(srctree)/scripts/Makefile.modinst
+
+# Run depmod only is we have System.map and depmod is executable
+quiet_cmd_depmod = DEPMOD $(KERNELRELEASE)
+ cmd_depmod = if [ -r System.map -a -x $(DEPMOD) ]; then \
+ $(DEPMOD) -ae -F System.map \
+ $(if $(strip $(INSTALL_MOD_PATH)), \
+ -b $(INSTALL_MOD_PATH) -r) \
+ $(KERNELRELEASE); \
+ fi
+
+PHONY += _emodinst_post
+_emodinst_post: _emodinst_
+ $(call cmd,depmod)
clean-dirs := $(addprefix _clean_,$(KBUILD_EXTMOD))
-.PHONY: $(clean-dirs) clean
+PHONY += $(clean-dirs) clean
$(clean-dirs):
$(Q)$(MAKE) $(clean)=$(patsubst _clean_%,%,$@)
clean: $(clean-dirs)
$(call cmd,rmdirs)
@find $(KBUILD_EXTMOD) $(RCS_FIND_IGNORE) \
- \( -name '*.[oas]' -o -name '*.ko' -o -name '.*.cmd' \
+ \( -name '*.[oas]' -o -name '*.ko' -o -name '.*.cmd' \
-o -name '.*.d' -o -name '.*.tmp' -o -name '*.mod.c' \) \
-type f -print | xargs rm -f
@echo ' modules_install - install the module'
@echo ' clean - remove generated files in module directory only'
@echo ''
+
+# Dummies...
+PHONY += prepare scripts
+prepare: ;
+scripts: ;
endif # KBUILD_EXTMOD
# Generate tags for editors
# ---------------------------------------------------------------------------
-define all-sources
- ( find $(srctree) $(RCS_FIND_IGNORE) \
+#We want __srctree to totally vanish out when KBUILD_OUTPUT is not set
+#(which is the most common case IMHO) to avoid unneeded clutter in the big tags file.
+#Adding $(srctree) adds about 20M on i386 to the size of the output file!
+
+ifeq ($(src),$(obj))
+__srctree =
+else
+__srctree = $(srctree)/
+endif
+
+ifeq ($(ALLSOURCE_ARCHS),)
+ifeq ($(ARCH),um)
+ALLINCLUDE_ARCHS := $(ARCH) $(SUBARCH)
+else
+ALLINCLUDE_ARCHS := $(ARCH)
+endif
+else
+#Allow user to specify only ALLSOURCE_PATHS on the command line, keeping existing behavour.
+ALLINCLUDE_ARCHS := $(ALLSOURCE_ARCHS)
+endif
+
+ALLSOURCE_ARCHS := $(ARCH)
+
+define find-sources
+ ( find $(__srctree) $(RCS_FIND_IGNORE) \
\( -name include -o -name arch \) -prune -o \
- -name '*.[chS]' -print; \
- find $(srctree)/arch/$(ARCH) $(RCS_FIND_IGNORE) \
- -name '*.[chS]' -print; \
- find $(srctree)/security/selinux/include $(RCS_FIND_IGNORE) \
- -name '*.[chS]' -print; \
- find $(srctree)/include $(RCS_FIND_IGNORE) \
+ -name $1 -print; \
+ for ARCH in $(ALLSOURCE_ARCHS) ; do \
+ find $(__srctree)arch/$${ARCH} $(RCS_FIND_IGNORE) \
+ -name $1 -print; \
+ done ; \
+ find $(__srctree)security/selinux/include $(RCS_FIND_IGNORE) \
+ -name $1 -print; \
+ find $(__srctree)include $(RCS_FIND_IGNORE) \
\( -name config -o -name 'asm-*' \) -prune \
- -o -name '*.[chS]' -print; \
- find $(srctree)/include/asm-$(ARCH) $(RCS_FIND_IGNORE) \
- -name '*.[chS]' -print; \
- find $(srctree)/include/asm-generic $(RCS_FIND_IGNORE) \
- -name '*.[chS]' -print )
+ -o -name $1 -print; \
+ for ARCH in $(ALLINCLUDE_ARCHS) ; do \
+ find $(__srctree)include/asm-$${ARCH} $(RCS_FIND_IGNORE) \
+ -name $1 -print; \
+ done ; \
+ find $(__srctree)include/asm-generic $(RCS_FIND_IGNORE) \
+ -name $1 -print )
+endef
+
+define all-sources
+ $(call find-sources,'*.[chS]')
+endef
+define all-kconfigs
+ $(call find-sources,'Kconfig*')
+endef
+define all-defconfigs
+ $(call find-sources,'defconfig')
+endef
+
+define xtags
+ if $1 --version 2>&1 | grep -iq exuberant; then \
+ $(all-sources) | xargs $1 -a \
+ -I __initdata,__exitdata,__acquires,__releases \
+ -I EXPORT_SYMBOL,EXPORT_SYMBOL_GPL \
+ --extra=+f --c-kinds=+px \
+ --regex-asm='/ENTRY\(([^)]*)\).*/\1/'; \
+ $(all-kconfigs) | xargs $1 -a \
+ --langdef=kconfig \
+ --language-force=kconfig \
+ --regex-kconfig='/^[[:blank:]]*config[[:blank:]]+([[:alnum:]_]+)/\1/'; \
+ $(all-defconfigs) | xargs -r $1 -a \
+ --langdef=dotconfig \
+ --language-force=dotconfig \
+ --regex-dotconfig='/^#?[[:blank:]]*(CONFIG_[[:alnum:]_]+)/\1/'; \
+ elif $1 --version 2>&1 | grep -iq emacs; then \
+ $(all-sources) | xargs $1 -a; \
+ $(all-kconfigs) | xargs $1 -a \
+ --regex='/^[ \t]*config[ \t]+\([a-zA-Z0-9_]+\)/\1/'; \
+ $(all-defconfigs) | xargs -r $1 -a \
+ --regex='/^#?[ \t]?\(CONFIG_[a-zA-Z0-9_]+\)/\1/'; \
+ else \
+ $(all-sources) | xargs $1 -a; \
+ fi
endef
quiet_cmd_cscope-file = FILELST cscope.files
- cmd_cscope-file = $(all-sources) > cscope.files
+ cmd_cscope-file = (echo \-k; echo \-q; $(all-sources)) > cscope.files
quiet_cmd_cscope = MAKE cscope.out
- cmd_cscope = cscope -k -b -q
+ cmd_cscope = cscope -b
cscope: FORCE
$(call cmd,cscope-file)
$(call cmd,cscope)
quiet_cmd_TAGS = MAKE $@
-cmd_TAGS = $(all-sources) | etags -
+define cmd_TAGS
+ rm -f $@; \
+ $(call xtags,etags)
+endef
-# Exuberant ctags works better with -I
+TAGS: FORCE
+ $(call cmd,TAGS)
quiet_cmd_tags = MAKE $@
define cmd_tags
rm -f $@; \
- CTAGSF=`ctags --version | grep -i exuberant >/dev/null && echo "-I __initdata,__exitdata,EXPORT_SYMBOL,EXPORT_SYMBOL_NOVERS"`; \
- $(all-sources) | xargs ctags $$CTAGSF -a
+ $(call xtags,ctags)
endef
-TAGS: FORCE
- $(call cmd,TAGS)
-
tags: FORCE
$(call cmd,tags)
# Scripts to check various things for consistency
# ---------------------------------------------------------------------------
-configcheck:
- find * $(RCS_FIND_IGNORE) \
- -name '*.[hcS]' -type f -print | sort \
- | xargs $(PERL) -w scripts/checkconfig.pl
-
includecheck:
find * $(RCS_FIND_IGNORE) \
-name '*.[hcS]' -type f -print | sort \
-name '*.[hcS]' -type f -print | sort \
| xargs $(PERL) -w scripts/checkversion.pl
-buildcheck:
- $(PERL) $(srctree)/scripts/reference_discarded.pl
- $(PERL) $(srctree)/scripts/reference_init.pl
-
namespacecheck:
$(PERL) $(srctree)/scripts/namespace.pl
endif #ifeq ($(config-targets),1)
endif #ifeq ($(mixed-targets),1)
-.PHONY: checkstack
+PHONY += checkstack kernelrelease kernelversion
+
+# UML needs a little special treatment here. It wants to use the host
+# toolchain, so needs $(SUBARCH) passed to checkstack.pl. Everyone
+# else wants $(ARCH), including people doing cross-builds, which means
+# that $(SUBARCH) doesn't work here.
+ifeq ($(ARCH), um)
+CHECKSTACK_ARCH := $(SUBARCH)
+else
+CHECKSTACK_ARCH := $(ARCH)
+endif
checkstack:
$(OBJDUMP) -d vmlinux $$(find . -name '*.ko') | \
- $(PERL) $(src)/scripts/checkstack.pl $(ARCH)
+ $(PERL) $(src)/scripts/checkstack.pl $(CHECKSTACK_ARCH)
+
+kernelrelease:
+ $(if $(wildcard include/config/kernel.release), $(Q)echo $(KERNELRELEASE), \
+ $(error kernelrelease not valid - run 'make prepare' to update it))
+kernelversion:
+ @echo $(KERNELVERSION)
+
+# Single targets
+# ---------------------------------------------------------------------------
+# Single targets are compatible with:
+# - build whith mixed source and output
+# - build with separate output dir 'make O=...'
+# - external modules
+#
+# target-dir => where to store outputfile
+# build-dir => directory in kernel source tree to use
+
+ifeq ($(KBUILD_EXTMOD),)
+ build-dir = $(patsubst %/,%,$(dir $@))
+ target-dir = $(dir $@)
+else
+ zap-slash=$(filter-out .,$(patsubst %/,%,$(dir $@)))
+ build-dir = $(KBUILD_EXTMOD)$(if $(zap-slash),/$(zap-slash))
+ target-dir = $(if $(KBUILD_EXTMOD),$(dir $<),$(dir $@))
+endif
+
+%.s: %.c prepare scripts FORCE
+ $(Q)$(MAKE) $(build)=$(build-dir) $(target-dir)$(notdir $@)
+%.i: %.c prepare scripts FORCE
+ $(Q)$(MAKE) $(build)=$(build-dir) $(target-dir)$(notdir $@)
+%.o: %.c prepare scripts FORCE
+ $(Q)$(MAKE) $(build)=$(build-dir) $(target-dir)$(notdir $@)
+%.lst: %.c prepare scripts FORCE
+ $(Q)$(MAKE) $(build)=$(build-dir) $(target-dir)$(notdir $@)
+%.s: %.S prepare scripts FORCE
+ $(Q)$(MAKE) $(build)=$(build-dir) $(target-dir)$(notdir $@)
+%.o: %.S prepare scripts FORCE
+ $(Q)$(MAKE) $(build)=$(build-dir) $(target-dir)$(notdir $@)
+%.symtypes: %.c prepare scripts FORCE
+ $(Q)$(MAKE) $(build)=$(build-dir) $(target-dir)$(notdir $@)
+
+# Modules
+/ %/: prepare scripts FORCE
+ $(Q)$(MAKE) KBUILD_MODULES=$(if $(CONFIG_MODULES),1) \
+ $(build)=$(build-dir)
+%.ko: prepare scripts FORCE
+ $(Q)$(MAKE) KBUILD_MODULES=$(if $(CONFIG_MODULES),1) \
+ $(build)=$(build-dir) $(@:.ko=.o)
+ $(Q)$(MAKE) -f $(srctree)/scripts/Makefile.modpost
# FIXME Should go into a make.lib or something
# ===========================================================================
a_flags = -Wp,-MD,$(depfile) $(AFLAGS) $(AFLAGS_KERNEL) \
$(NOSTDINC_FLAGS) $(CPPFLAGS) \
- $(modkern_aflags) $(EXTRA_AFLAGS) $(AFLAGS_$(*F).o)
+ $(modkern_aflags) $(EXTRA_AFLAGS) $(AFLAGS_$(basetarget).o)
quiet_cmd_as_o_S = AS $@
cmd_as_o_S = $(CC) $(a_flags) -c -o $@ $<
include $(cmd_files)
endif
-# Execute command and generate cmd file
-if_changed = $(if $(strip $? \
- $(filter-out $(cmd_$(1)),$(cmd_$@))\
- $(filter-out $(cmd_$@),$(cmd_$(1)))),\
- @set -e; \
- $(if $($(quiet)cmd_$(1)),echo ' $(subst ','\'',$($(quiet)cmd_$(1)))';) \
- $(cmd_$(1)); \
- echo 'cmd_$@ := $(subst $$,$$$$,$(subst ','\'',$(cmd_$(1))))' > $(@D)/.$(@F).cmd)
-
-
-# execute the command and also postprocess generated .d dependencies
-# file
-if_changed_dep = $(if $(strip $? $(filter-out FORCE $(wildcard $^),$^)\
- $(filter-out $(cmd_$(1)),$(cmd_$@))\
- $(filter-out $(cmd_$@),$(cmd_$(1)))),\
- $(Q)set -e; \
- $(if $($(quiet)cmd_$(1)),echo ' $(subst ','\'',$($(quiet)cmd_$(1)))';) \
- $(cmd_$(1)); \
- scripts/basic/fixdep $(depfile) $@ '$(subst $$,$$$$,$(subst ','\'',$(cmd_$(1))))' > $(@D)/.$(@F).tmp; \
- rm -f $(depfile); \
- mv -f $(@D)/.$(@F).tmp $(@D)/.$(@F).cmd)
-
-# Usage: $(call if_changed_rule,foo)
-# will check if $(cmd_foo) changed, or any of the prequisites changed,
-# and if so will execute $(rule_foo)
-
-if_changed_rule = $(if $(strip $? \
- $(filter-out $(cmd_$(1)),$(cmd_$(@F)))\
- $(filter-out $(cmd_$(@F)),$(cmd_$(1)))),\
- $(Q)$(rule_$(1)))
-
-# If quiet is set, only print short version of command
-
-cmd = @$(if $($(quiet)cmd_$(1)),echo ' $($(quiet)cmd_$(1))' &&) $(cmd_$(1))
-
-# filechk is used to check if the content of a generated file is updated.
-# Sample usage:
-# define filechk_sample
-# echo $KERNELRELEASE
-# endef
-# version.h : Makefile
-# $(call filechk,sample)
-# The rule defined shall write to stdout the content of the new file.
-# The existing file will be compared with the new one.
-# - If no file exist it is created
-# - If the content differ the new file is used
-# - If they are equal no change, and no timestamp update
-
-define filechk
- @set -e; \
- echo ' CHK $@'; \
- mkdir -p $(dir $@); \
- $(filechk_$(1)) < $< > $@.tmp; \
- if [ -r $@ ] && cmp -s $@ $@.tmp; then \
- rm -f $@.tmp; \
- else \
- echo ' UPD $@'; \
- mv -f $@.tmp $@; \
- fi
-endef
-
-# Shorthand for $(Q)$(MAKE) -f scripts/Makefile.build obj=dir
-# Usage:
-# $(Q)$(MAKE) $(build)=dir
-build := -f $(if $(KBUILD_SRC),$(srctree)/)scripts/Makefile.build obj
-
# Shorthand for $(Q)$(MAKE) -f scripts/Makefile.clean obj=dir
# Usage:
# $(Q)$(MAKE) $(clean)=dir
clean := -f $(if $(KBUILD_SRC),$(srctree)/)scripts/Makefile.clean obj
-# $(call descend,<dir>,<target>)
-# Recursively call a sub-make in <dir> with target <target>
-# Usage is deprecated, because make does not see this as an invocation of make.
-descend =$(Q)$(MAKE) -f $(if $(KBUILD_SRC),$(srctree)/)scripts/Makefile.build obj=$(1) $(2)
-
endif # skip-makefile
+PHONY += FORCE
FORCE:
+
+# Cancel implicit rules on top Makefile, `-rR' will apply to sub-makes.
+Makefile: ;
+
+# Declare the contents of the .PHONY variable as phony. We keep that
+# information in a variable se we can use it in if_changed and friends.
+.PHONY: $(PHONY)