-This file documents the contents of this module
+Last update 18 MAR. 2015
-Last update 4 sept. 2013
+Installation
+=================================================================
+Complete Guide: http://trac.myslice.info/wiki/Manifold/Install
-See the devel/ subdir for more devel-oriented doc.
+Recommended OS
+===============
+Debian GNU/Linux 7.5 (wheezy) x64
-==================== 1 minute howto
+PYTHON DEPENDENCIES
+=====================
+sudo apt-get install python-pip or sudo easy_install pip==1.4.1
+sudo apt-get install python-dev (for paramiko and pyOpenSSL)
+sudo apt-get install libffi-dev (for pyOpenSSL)
-* REQUIREMENTS is to have python + django installed django
-** should be straightforward
-** see devel/django-install.txt in case of trouble
+$ pip install django=="1.5.2"
+$ apt-get install python-django-south
+$ pip install requests
+$ pip install djangorestframework
+$ pip install django-celery
+$ pip install geopy
+$ pip install paramiko
+$ pip install pyparsing
+$ pip install python-dateutil
+$ pip instal pyOpenSSL
-* git clone git://git.onelab.eu/myslice.git
--- or --
-* git clone ssh://yourlogin@git.onelab.eu/git/myslice.git
+MYSLICE
+=======
+git clone ssh://yourlogin@git.onelab.eu/git/myslice.git
+cd myslice
+git checkout onelab
-* edit myslice/config.py and enter the details of your manifold backend
+edit/create myslice/myslice.ini and enter the details of your manifold backend
-* init django
-$ manage.py syncdb
+mkdir /var/unfold
+copy unfold.sqlite3 to /var/unfold
+
+$ ./manage.py syncdb
+$ ./manage.py migrate
+
+use the unfold.sqlite3 i gave to u
+
+$ make redo
+$ ./devel/server-loop.sh
+
+MANIFOLD
+==========
+git clone git://git.onelab.eu/manifold.git
+cd manifold
+git checkout devel
+make && make install
+
+SFA
+===
+$ git clone -b geni-v3 git://git.onelab.eu/sfa.git
+$ cd sfa
+$ git checkout geni-v3
+
+$ make version
+$ python ./setup.py install
+
+=====================================================================
+
+## Whenever doing a git pull the following operations are recommended:
+
+$ make static # will refresh static/ from all the pieces in the project
+$ make templates # same, for templates
+$ make redo-static # clears up (rm -rf) static/ first, then make static
+$ make redo-templates # ditto for templates
+$ make redo == make redo-static redo-templates
-* gather static files
-$ ./manage.py collectstatic (formerly, we used make static, which is deprecated)
--- or --
-$ ./manage.py collectstatic --noinput
* run a local server:
-$ manage.py runserver 0.0.0.0:8000
+$ ./manage.py runserver 0.0.0.0:8000
-- or -- my advice:
$ devel/server-loop.sh
when you just need to hit ^C yourself when your static files need to be refreshed - see below
$ pip install -r path/to/requirements/file.txt
Note. not quite sure what this is about, I could not spot this file..
+=====APACHE Config=====
+if are running apache please do:
+
+$ chown www-data:www-data /var/myslice-f4f
+
+otherwise you may get the following error:
+"DatabaseError: unable to open database file"
+
==================== Status
*** Authentication ***
for how to use a separate authentication system,
as well as settings.py for how to enable it
+* ui/
+ provides building blocks for the UI, especially layouts (1 or 2 columns) as
+ well as the topmenu widget
+ + some global static files (css, js, images..)
+
* portal/
this is where the first implementation of myslice, with complete
user-management including registration, is taking place
rough/preliminary scaffolding views are in here
as the name suggests this is temporary
-* views/
- will receive actual views over time
- currently has some global html templates as well
- + some global static files (css, js, images..)
-
* insert_above:
a third-party django app for adding on-the-fly mentions to css or js files that need to go in the header
========== automatically generated
-* all-static: (generated, no need to source-control)
- this is where 'make static' will gather all your static contents if you run a local server
- make has convenience targets to refresh this area
- $ make static
- $ make clean-static
+* static/: (generated by collectstatic, see above, do not source-control)
+ $ manage.py [ --noinput ] collectstatic
-* django-static
+* templates/
* myslice.sqlite3
this is where django stores its own stuff, as per settings.py
. second, when you do use it for developement purposes, please be aware that:
-.. the recommended layout for the various files and pieces (py, html, js and css) with django is
- IMHO really painful; we *SHOULD* use e.g.
- plugins/simplelist.py,
- plugins/templates/plugins.html,
- plugins/static/js/simplelist.js
- plugins/static/css/simplelist.css
- which I have tried doing for a while but I found myself just hopping around in the file tree all
- day long, wasting cycles big time
-
-.. as that does not make sense IMHO, I've rewritten the tool for gathering these pieces (this is in
- the Makefile). Bottom line is we can essentially store this wherever we want.
- The only restriction being that if you have a template that is *not* html, then it *has to* sit
- in a templates/ directory, otherwise it gets shipped as a static file.
-
-.. as a result, we can now store all the files building a plugin in a single (git) directory; like e.g.
- plugins/quickfilter/quickfilter.py
- plugins/quickfilter/quickfilter.html
- plugins/quickfilter/quickfilter.js
- plugins/quickfilter/quickfilter.css
-
- Of course it's a completely different matter once the service is packaged and installed, these
- files of course get properly separated.
-
-.. as a result it is a little bit less convenient to use the development server when you change the
- layout of your static and template files, you might need to re-run 'make static', so it is
- recommended to use devel/server-loop.sh instead
-
+.. the recommended layout for the various files and pieces (py, html, js and css) with django is e.g.
+ plugins/quickfilter/___init__.py,
+ plugins/quickfilter/templates/quickfilter.html,
+ plugins/quickfilter/static/js/quickfilter.js
+ plugins/quickfilter/static/css/quickfilter.css
+ plugins/quickfilter/static/img/some-image.png
-All this being said, here are our current conventions for storing templates and static files
+.. the files actually used by the development server are the ones located in
+ static/
+ templates/
-* templates:
- we store this under templates/ within the corresponding app, e.g.
- auth/templates/login.html
- for now this is mostly about html, but the engine can be used for rendering anything
- including js(on) or whatever (in which case, as stated above, this *must* have /templates/ in its path.
+you can and should use the following make targets to refresh the
+contents of these directories when running a developement server
+$ make static to refresh static/
+$ make redo-static to clean up static/ and then refresh its contents
+$ make templates to refresh templates/
+$ make redo-templates to clean up templates/ and then refresh its contents
+$ make redo equivalent to make redo-static redo-templates
-* static files:
- we chose to have all static files (images, but also javascript and stylesheets) in the various
- proj or app where they belong, with a layout like:
- where-it-belongs/
- img/
- css/
- js/
- Honestly it's not yet very clear sometimes what 'where-it-belongs' should be sometimes, and it
- does not matter too much anyway, given that the code doesn't need to change when we move things
- around. So in particular it's fuzzy between myslice/ (where the logo could fit e.g.) views/ and
- even trash/
+.. as far as possible, please make sure to use third-party to store
+any javascript tool or utility that your plugin depends upon
-Makefile has a few convenience targets to list all kinds of stuff; the 2 major targets are
+also we have the convention that all material in third-party should be
+tagged with a version number, with a symlink pointing to the version
+being used, like this
-$ make static templates
+~/git/myslice/third-party $ ls -ld spin*
+lrwxr-xr-x 1 parmentelat staff 10 Sep 6 17:55 spin -> spin-1.3.0
+drwxr-xr-x 7 parmentelat staff 238 Sep 6 17:55 spin-1.2.8
+drwxr-xr-x 7 parmentelat staff 238 Sep 6 17:55 spin-1.3.0
-that would reset all-static/ and all-templates/ for you from the other contents
+finally, as far as possible we keep track of the urls used to pull
+stuff in the first place so that upgrades are easier
-* third-party
- please note that the set of files that actually get exposed in all-static from third-party is
- hand-coded in Makefile because we tried to preserve the original codebase layout from mainstream,
- and there's only so much in common between 2 differents js libraries at this point.
+. third, be careful when importing third party material, to stay away from demo-oriented material
+e.g. at some point we were using demo_page.css and demo_table.css from the datatables demo and sample pages
+unfortunately these are not tailored for production use as they are setting styles on a very wide scope
+that breaks a lot of stuff, so please refrain from using these altogether
======== update django database to reflect changes in existing models without any migration system (e.g., south) =========
If your changes break your old schema this won't work - in which case tools like south or django evolution are great.
-======== update django database to reflect changes in existing models with migration system (e.g., south) =========
-
-As south is already installed , you just have to do:
-
-$./manage.py migrate
-if it fails:
-
-1. go to myslice directory
-2. do sqlite3 myslice.sqlite3 [if sqlite3: command not found, do $apt-get install sqlite3]
-3. check the list of tables with sqlite> .tables
-4. if you find those tables that was mentioned in the failure message while running $./manage.py migrate
- do sqlite> DROP TABLE mentioned_table
- [mentioned_table = the tables that was explicity mentioned in the failure message of $./manage.py migrate]
-5. sqlite> .quit
-6. $./manage.py migrate
+Add a new model to the DB
+$python manage.py schemamigration <your_app> --auto
+$python manage.py migrate
+======== update django database to reflect changes in existing models with migration system (e.g., south) =========
+As south is already installed , you just have to do:
+# ./manage.py schemamigration portal --initial
+# sqlite3 /var/unfold/unfold.sqlite3
+ sqlite> DROP TABLE "portal_institution";
+ sqlite> DROP TABLE "portal_pendinguser";
+ sqlite> DROP TABLE "portal_pendingauthority";
+ sqlite> DROP TABLE "portal_pendingslice";
+ sqlite> .quit
+# ./manage.py migrate portal