#include <asm/mach-types.h>
#include <asm/mach/arch.h>
-#include <asm/arch/mmc.h>
-#include <asm/arch/imx-uart.h>
#include <linux/interrupt.h>
#include "generic.h"
.resource = cs89x0_resources,
};
-static struct imxuart_platform_data uart_pdata = {
- .flags = IMXUART_HAVE_RTSCTS,
-};
-
-static struct resource imx_uart1_resources[] = {
- [0] = {
- .start = 0x00206000,
- .end = 0x002060FF,
- .flags = IORESOURCE_MEM,
- },
- [1] = {
- .start = (UART1_MINT_RX),
- .end = (UART1_MINT_RX),
- .flags = IORESOURCE_IRQ,
- },
- [2] = {
- .start = (UART1_MINT_TX),
- .end = (UART1_MINT_TX),
- .flags = IORESOURCE_IRQ,
- },
-};
-
-static struct platform_device imx_uart1_device = {
- .name = "imx-uart",
- .id = 0,
- .num_resources = ARRAY_SIZE(imx_uart1_resources),
- .resource = imx_uart1_resources,
- .dev = {
- .platform_data = &uart_pdata,
- }
-};
-
-static struct resource imx_uart2_resources[] = {
- [0] = {
- .start = 0x00207000,
- .end = 0x002070FF,
- .flags = IORESOURCE_MEM,
- },
- [1] = {
- .start = (UART2_MINT_RX),
- .end = (UART2_MINT_RX),
- .flags = IORESOURCE_IRQ,
- },
- [2] = {
- .start = (UART2_MINT_TX),
- .end = (UART2_MINT_TX),
- .flags = IORESOURCE_IRQ,
- },
-};
-
-static struct platform_device imx_uart2_device = {
- .name = "imx-uart",
- .id = 1,
- .num_resources = ARRAY_SIZE(imx_uart2_resources),
- .resource = imx_uart2_resources,
- .dev = {
- .platform_data = &uart_pdata,
- }
-};
-
static struct platform_device *devices[] __initdata = {
&cs89x0_device,
- &imx_uart1_device,
- &imx_uart2_device,
-};
-
-#ifdef CONFIG_MMC_IMX
-static int mx1ads_mmc_card_present(void)
-{
- /* MMC/SD Card Detect is PB 20 on MX1ADS V1.0.7 */
- return (SSR(1) & (1 << 20) ? 0 : 1);
-}
-
-static struct imxmmc_platform_data mx1ads_mmc_info = {
- .card_present = mx1ads_mmc_card_present,
};
-#endif
static void __init
mx1ads_init(void)
#ifdef CONFIG_LEDS
imx_gpio_mode(GPIO_PORTA | GPIO_OUT | 2);
#endif
-#ifdef CONFIG_MMC_IMX
- /* SD/MMC card detect */
- imx_gpio_mode(GPIO_PORTB | GPIO_GIUS | GPIO_IN | 20);
- imx_set_mmc_info(&mx1ads_mmc_info);
-#endif
-
- imx_gpio_mode(PC9_PF_UART1_CTS);
- imx_gpio_mode(PC10_PF_UART1_RTS);
- imx_gpio_mode(PC11_PF_UART1_TXD);
- imx_gpio_mode(PC12_PF_UART1_RXD);
-
- imx_gpio_mode(PB28_PF_UART2_CTS);
- imx_gpio_mode(PB29_PF_UART2_RTS);
- imx_gpio_mode(PB30_PF_UART2_TXD);
- imx_gpio_mode(PB31_PF_UART2_RXD);
-
platform_add_devices(devices, ARRAY_SIZE(devices));
}
MACHINE_START(MX1ADS, "Motorola MX1ADS")
/* Maintainer: Sascha Hauer, Pengutronix */
.phys_io = 0x00200000,
- .io_pg_offst = ((0xe0000000) >> 18) & 0xfffc,
+ .io_pg_offst = ((0xe0200000) >> 18) & 0xfffc,
.boot_params = 0x08000100,
.map_io = mx1ads_map_io,
.init_irq = imx_init_irq,