#include <linux/init.h>
#include <linux/device.h>
#include <linux/errno.h>
+#include <linux/mm.h>
+#include <linux/amba/bus.h>
+#include <linux/amba/clcd.h>
#include <asm/io.h>
#include <asm/hardware/icst525.h>
-#include <asm/hardware/amba.h>
#include <asm/arch/lm.h>
#include <asm/arch/impd1.h>
#include <asm/sizes.h>
+#include "clock.h"
+
static int module_id;
module_param_named(lmid, module_id, int, 0444);
MODULE_PARM_DESC(lmid, "logic module stack position");
struct impd1_module {
- void *base;
+ void __iomem *base;
+ struct clk vcos[2];
};
static const struct icst525_params impd1_vco_params = {
.rd_max = 120,
};
-void impd1_set_vco(struct device *dev, int vconr, unsigned long period)
+static void impd1_setvco(struct clk *clk, struct icst525_vco vco)
{
- struct impd1_module *impd1 = dev_get_drvdata(dev);
- struct icst525_vco vco;
+ struct impd1_module *impd1 = clk->data;
+ int vconr = clk - impd1->vcos;
u32 val;
- vco = icst525_ps_to_vco(&impd1_vco_params, period);
-
- pr_debug("Guessed VCO reg params: S=%d R=%d V=%d\n",
- vco.s, vco.r, vco.v);
-
val = vco.v | (vco.r << 9) | (vco.s << 16);
writel(0xa05f, impd1->base + IMPD1_LOCK);
switch (vconr) {
- case 1:
+ case 0:
writel(val, impd1->base + IMPD1_OSC1);
break;
- case 2:
+ case 1:
writel(val, impd1->base + IMPD1_OSC2);
break;
}
writel(0, impd1->base + IMPD1_LOCK);
-#if DEBUG
+#ifdef DEBUG
vco.v = val & 0x1ff;
vco.r = (val >> 9) & 0x7f;
vco.s = (val >> 16) & 7;
#endif
}
-EXPORT_SYMBOL(impd1_set_vco);
-
void impd1_tweak_control(struct device *dev, u32 mask, u32 val)
{
struct impd1_module *impd1 = dev_get_drvdata(dev);
EXPORT_SYMBOL(impd1_tweak_control);
+/*
+ * CLCD support
+ */
+#define PANEL PROSPECTOR
+
+#define LTM10C209 1
+#define PROSPECTOR 2
+#define SVGA 3
+#define VGA 4
+
+#if PANEL == VGA
+#define PANELTYPE vga
+static struct clcd_panel vga = {
+ .mode = {
+ .name = "VGA",
+ .refresh = 60,
+ .xres = 640,
+ .yres = 480,
+ .pixclock = 39721,
+ .left_margin = 40,
+ .right_margin = 24,
+ .upper_margin = 32,
+ .lower_margin = 11,
+ .hsync_len = 96,
+ .vsync_len = 2,
+ .sync = 0,
+ .vmode = FB_VMODE_NONINTERLACED,
+ },
+ .width = -1,
+ .height = -1,
+ .tim2 = TIM2_BCD | TIM2_IPC,
+ .cntl = CNTL_LCDTFT | CNTL_LCDVCOMP(1),
+ .connector = IMPD1_CTRL_DISP_VGA,
+ .bpp = 16,
+ .grayscale = 0,
+};
+
+#elif PANEL == SVGA
+#define PANELTYPE svga
+static struct clcd_panel svga = {
+ .mode = {
+ .name = "SVGA",
+ .refresh = 0,
+ .xres = 800,
+ .yres = 600,
+ .pixclock = 27778,
+ .left_margin = 20,
+ .right_margin = 20,
+ .upper_margin = 5,
+ .lower_margin = 5,
+ .hsync_len = 164,
+ .vsync_len = 62,
+ .sync = 0,
+ .vmode = FB_VMODE_NONINTERLACED,
+ },
+ .width = -1,
+ .height = -1,
+ .tim2 = TIM2_BCD,
+ .cntl = CNTL_LCDTFT | CNTL_LCDVCOMP(1),
+ .connector = IMPD1_CTRL_DISP_VGA,
+ .bpp = 16,
+ .grayscale = 0,
+};
+
+#elif PANEL == PROSPECTOR
+#define PANELTYPE prospector
+static struct clcd_panel prospector = {
+ .mode = {
+ .name = "PROSPECTOR",
+ .refresh = 0,
+ .xres = 640,
+ .yres = 480,
+ .pixclock = 40000,
+ .left_margin = 33,
+ .right_margin = 64,
+ .upper_margin = 36,
+ .lower_margin = 7,
+ .hsync_len = 64,
+ .vsync_len = 25,
+ .sync = FB_SYNC_HOR_HIGH_ACT | FB_SYNC_VERT_HIGH_ACT,
+ .vmode = FB_VMODE_NONINTERLACED,
+ },
+ .width = -1,
+ .height = -1,
+ .tim2 = TIM2_BCD,
+ .cntl = CNTL_LCDTFT | CNTL_LCDVCOMP(1),
+ .fixedtimings = 1,
+ .connector = IMPD1_CTRL_DISP_LCD,
+ .bpp = 16,
+ .grayscale = 0,
+};
+
+#elif PANEL == LTM10C209
+#define PANELTYPE ltm10c209
+/*
+ * Untested.
+ */
+static struct clcd_panel ltm10c209 = {
+ .mode = {
+ .name = "LTM10C209",
+ .refresh = 0,
+ .xres = 640,
+ .yres = 480,
+ .pixclock = 40000,
+ .left_margin = 20,
+ .right_margin = 20,
+ .upper_margin = 19,
+ .lower_margin = 19,
+ .hsync_len = 20,
+ .vsync_len = 10,
+ .sync = FB_SYNC_HOR_HIGH_ACT | FB_SYNC_VERT_HIGH_ACT,
+ .vmode = FB_VMODE_NONINTERLACED,
+ },
+ .width = -1,
+ .height = -1,
+ .tim2 = TIM2_BCD,
+ .cntl = CNTL_LCDTFT | CNTL_LCDVCOMP(1),
+ .fixedtimings = 1,
+ .connector = IMPD1_CTRL_DISP_LCD,
+ .bpp = 16,
+ .grayscale = 0,
+};
+#endif
+
+/*
+ * Disable all display connectors on the interface module.
+ */
+static void impd1fb_clcd_disable(struct clcd_fb *fb)
+{
+ impd1_tweak_control(fb->dev->dev.parent, IMPD1_CTRL_DISP_MASK, 0);
+}
+
+/*
+ * Enable the relevant connector on the interface module.
+ */
+static void impd1fb_clcd_enable(struct clcd_fb *fb)
+{
+ impd1_tweak_control(fb->dev->dev.parent, IMPD1_CTRL_DISP_MASK,
+ fb->panel->connector | IMPD1_CTRL_DISP_ENABLE);
+}
+
+static int impd1fb_clcd_setup(struct clcd_fb *fb)
+{
+ unsigned long framebase = fb->dev->res.start + 0x01000000;
+ unsigned long framesize = SZ_1M;
+ int ret = 0;
+
+ fb->panel = &PANELTYPE;
+
+ if (!request_mem_region(framebase, framesize, "clcd framebuffer")) {
+ printk(KERN_ERR "IM-PD1: unable to reserve framebuffer\n");
+ return -EBUSY;
+ }
+
+ fb->fb.screen_base = ioremap(framebase, framesize);
+ if (!fb->fb.screen_base) {
+ printk(KERN_ERR "IM-PD1: unable to map framebuffer\n");
+ ret = -ENOMEM;
+ goto free_buffer;
+ }
+
+ fb->fb.fix.smem_start = framebase;
+ fb->fb.fix.smem_len = framesize;
+
+ return 0;
+
+ free_buffer:
+ release_mem_region(framebase, framesize);
+ return ret;
+}
+
+static int impd1fb_clcd_mmap(struct clcd_fb *fb, struct vm_area_struct *vma)
+{
+ unsigned long start, size;
+
+ start = vma->vm_pgoff + (fb->fb.fix.smem_start >> PAGE_SHIFT);
+ size = vma->vm_end - vma->vm_start;
+
+ return remap_pfn_range(vma, vma->vm_start, start, size,
+ vma->vm_page_prot);
+}
+
+static void impd1fb_clcd_remove(struct clcd_fb *fb)
+{
+ iounmap(fb->fb.screen_base);
+ release_mem_region(fb->fb.fix.smem_start, fb->fb.fix.smem_len);
+}
+
+static struct clcd_board impd1_clcd_data = {
+ .name = "IM-PD/1",
+ .check = clcdfb_check,
+ .decode = clcdfb_decode,
+ .disable = impd1fb_clcd_disable,
+ .enable = impd1fb_clcd_enable,
+ .setup = impd1fb_clcd_setup,
+ .mmap = impd1fb_clcd_mmap,
+ .remove = impd1fb_clcd_remove,
+};
+
struct impd1_device {
unsigned long offset;
unsigned int irq[2];
unsigned int id;
+ void *platform_data;
};
static struct impd1_device impd1_devs[] = {
.offset = 0x01000000,
.irq = { 11 },
.id = 0x00041110,
+ .platform_data = &impd1_clcd_data,
}
};
+static const char *impd1_vconames[2] = {
+ "CLCDCLK",
+ "AUXVCO2",
+};
+
static int impd1_probe(struct lm_device *dev)
{
struct impd1_module *impd1;
if (!request_mem_region(dev->resource.start, SZ_4K, "LM registers"))
return -EBUSY;
- impd1 = kmalloc(sizeof(struct impd1_module), GFP_KERNEL);
+ impd1 = kzalloc(sizeof(struct impd1_module), GFP_KERNEL);
if (!impd1) {
ret = -ENOMEM;
goto release_lm;
}
- memset(impd1, 0, sizeof(struct impd1_module));
impd1->base = ioremap(dev->resource.start, SZ_4K);
if (!impd1->base) {
printk("IM-PD1 found at 0x%08lx\n", dev->resource.start);
+ for (i = 0; i < ARRAY_SIZE(impd1->vcos); i++) {
+ impd1->vcos[i].owner = THIS_MODULE,
+ impd1->vcos[i].name = impd1_vconames[i],
+ impd1->vcos[i].params = &impd1_vco_params,
+ impd1->vcos[i].data = impd1,
+ impd1->vcos[i].setvco = impd1_setvco;
+
+ clk_register(&impd1->vcos[i]);
+ }
+
for (i = 0; i < ARRAY_SIZE(impd1_devs); i++) {
struct impd1_device *idev = impd1_devs + i;
struct amba_device *d;
pc_base = dev->resource.start + idev->offset;
- d = kmalloc(sizeof(struct amba_device), GFP_KERNEL);
+ d = kzalloc(sizeof(struct amba_device), GFP_KERNEL);
if (!d)
continue;
- memset(d, 0, sizeof(struct amba_device));
-
snprintf(d->dev.bus_id, sizeof(d->dev.bus_id),
"lm%x:%5.5lx", dev->id, idev->offset >> 12);
d->irq[0] = dev->irq;
d->irq[1] = dev->irq;
d->periphid = idev->id;
+ d->dev.platform_data = idev->platform_data;
ret = amba_device_register(d, &dev->resource);
if (ret) {
free_impd1:
if (impd1 && impd1->base)
iounmap(impd1->base);
- if (impd1)
- kfree(impd1);
+ kfree(impd1);
release_lm:
release_mem_region(dev->resource.start, SZ_4K);
return ret;
}
+static int impd1_remove_one(struct device *dev, void *data)
+{
+ device_unregister(dev);
+ return 0;
+}
+
static void impd1_remove(struct lm_device *dev)
{
struct impd1_module *impd1 = lm_get_drvdata(dev);
- struct list_head *l, *n;
+ int i;
- list_for_each_safe(l, n, &dev->dev.children) {
- struct device *d = list_to_dev(l);
+ device_for_each_child(&dev->dev, NULL, impd1_remove_one);
- device_unregister(d);
- }
+ for (i = 0; i < ARRAY_SIZE(impd1->vcos); i++)
+ clk_unregister(&impd1->vcos[i]);
lm_set_drvdata(dev, NULL);