--- /dev/null
+/*
+ * arch/arm/mach-ixp2000/pci.c
+ *
+ * PCI routines for IXDP2400/IXDP2800 boards
+ *
+ * Original Author: Naeem Afzal <naeem.m.afzal@intel.com>
+ * Maintained by: Deepak Saxena <dsaxena@plexity.net>
+ *
+ * Copyright 2002 Intel Corp.
+ * Copyright (C) 2003-2004 MontaVista Software, Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the
+ * Free Software Foundation; either version 2 of the License, or (at your
+ * option) any later version.
+ */
+
+#include <linux/sched.h>
+#include <linux/kernel.h>
+#include <linux/pci.h>
+#include <linux/interrupt.h>
+#include <linux/mm.h>
+#include <linux/init.h>
+#include <linux/ioport.h>
+#include <linux/slab.h>
+#include <linux/delay.h>
+
+#include <asm/io.h>
+#include <asm/irq.h>
+#include <asm/system.h>
+#include <asm/mach-types.h>
+#include <asm/hardware.h>
+
+#include <asm/mach/pci.h>
+
+static int pci_master_aborts = 0;
+
+static int clear_master_aborts(void);
+
+static u32 *
+ixp2000_pci_config_addr(unsigned int bus_nr, unsigned int devfn, int where)
+{
+ u32 *paddress;
+
+ if (PCI_SLOT(devfn) > 7)
+ return 0;
+
+ /* Must be dword aligned */
+ where &= ~3;
+
+ /*
+ * For top bus, generate type 0, else type 1
+ */
+ if (!bus_nr) {
+ /* only bits[23:16] are used for IDSEL */
+ paddress = (u32 *) (IXP2000_PCI_CFG0_VIRT_BASE
+ | (1 << (PCI_SLOT(devfn) + 16))
+ | (PCI_FUNC(devfn) << 8) | where);
+ } else {
+ paddress = (u32 *) (IXP2000_PCI_CFG1_VIRT_BASE
+ | (bus_nr << 16)
+ | (PCI_SLOT(devfn) << 11)
+ | (PCI_FUNC(devfn) << 8) | where);
+ }
+
+ return paddress;
+}
+
+/*
+ * Mask table, bits to mask for quantity of size 1, 2 or 4 bytes.
+ * 0 and 3 are not valid indexes...
+ */
+static u32 bytemask[] = {
+ /*0*/ 0,
+ /*1*/ 0xff,
+ /*2*/ 0xffff,
+ /*3*/ 0,
+ /*4*/ 0xffffffff,
+};
+
+
+int ixp2000_pci_read_config(struct pci_bus *bus, unsigned int devfn, int where,
+ int size, u32 *value)
+{
+ u32 n;
+ u32 *addr;
+
+ n = where % 4;
+
+ addr = ixp2000_pci_config_addr(bus->number, devfn, where);
+ if (!addr)
+ return PCIBIOS_DEVICE_NOT_FOUND;
+
+ pci_master_aborts = 0;
+ *value = (*addr >> (8*n)) & bytemask[size];
+ if (pci_master_aborts) {
+ pci_master_aborts = 0;
+ *value = 0xffffffff;
+ return PCIBIOS_DEVICE_NOT_FOUND;
+ }
+
+ return PCIBIOS_SUCCESSFUL;
+}
+
+/*
+ * We don't do error checks by callling clear_master_aborts() b/c the
+ * assumption is that the caller did a read first to make sure a device
+ * exists.
+ */
+int ixp2000_pci_write_config(struct pci_bus *bus, unsigned int devfn, int where,
+ int size, u32 value)
+{
+ u32 mask;
+ u32 *addr;
+ u32 temp;
+
+ mask = ~(bytemask[size] << ((where % 0x4) * 8));
+ addr = ixp2000_pci_config_addr(bus->number, devfn, where);
+ if (!addr)
+ return PCIBIOS_DEVICE_NOT_FOUND;
+ temp = (u32) (value) << ((where % 0x4) * 8);
+ *addr = (*addr & mask) | temp;
+
+ clear_master_aborts();
+
+ return PCIBIOS_SUCCESSFUL;
+}
+
+
+static struct pci_ops ixp2000_pci_ops = {
+ .read = ixp2000_pci_read_config,
+ .write = ixp2000_pci_write_config
+};
+
+struct pci_bus *ixp2000_pci_scan_bus(int nr, struct pci_sys_data *sysdata)
+{
+ return pci_scan_bus(sysdata->busnr, &ixp2000_pci_ops, sysdata);
+}
+
+
+int ixp2000_pci_abort_handler(unsigned long addr, unsigned int fsr, struct pt_regs *regs)
+{
+
+ volatile u32 temp;
+
+ pci_master_aborts = 1;
+
+ cli();
+ temp = *(IXP2000_PCI_CONTROL);
+ if (temp & ((1 << 8) | (1 << 5))) {
+ *(IXP2000_PCI_CONTROL) = temp;
+ }
+
+ temp = *(IXP2000_PCI_CMDSTAT);
+ if (temp & (1 << 29)) {
+ while (temp & (1 << 29)) {
+ *(IXP2000_PCI_CMDSTAT) = temp;
+ temp = *(IXP2000_PCI_CMDSTAT);
+ }
+ }
+ sti();
+
+ /*
+ * If it was an imprecise abort, then we need to correct the
+ * return address to be _after_ the instruction.
+ */
+ if (fsr & (1 << 10))
+ regs->ARM_pc += 4;
+
+ return 0;
+}
+
+int
+clear_master_aborts(void)
+{
+ volatile u32 temp;
+
+ cli();
+ temp = *(IXP2000_PCI_CONTROL);
+ if (temp & ((1 << 8) | (1 << 5))) {
+ *(IXP2000_PCI_CONTROL) = temp;
+ }
+
+ temp = *(IXP2000_PCI_CMDSTAT);
+ if (temp & (1 << 29)) {
+ while (temp & (1 << 29)) {
+ *(IXP2000_PCI_CMDSTAT) = temp;
+ temp = *(IXP2000_PCI_CMDSTAT);
+ }
+ }
+ sti();
+
+ return 0;
+}
+
+void __init
+ixp2000_pci_preinit(void)
+{
+ hook_fault_code(16+6, ixp2000_pci_abort_handler, SIGBUS,
+ "PCI config cycle to non-existent device");
+}
+
+
+/*
+ * IXP2000 systems often have large resource requirements, so we just
+ * use our own resource space.
+ */
+static struct resource ixp2000_pci_mem_space = {
+ .start = 0x00000000,
+ .end = 0xffffffff,
+ .flags = IORESOURCE_MEM,
+ .name = "PCI Mem Space"
+};
+
+static struct resource ixp2000_pci_io_space = {
+ .start = 0x00000000,
+ .end = 0xffffffff,
+ .flags = IORESOURCE_IO,
+ .name = "PCI I/O Space"
+};
+
+int ixp2000_pci_setup(int nr, struct pci_sys_data *sys)
+{
+ if (nr >= 1)
+ return 0;
+
+ sys->resource[0] = &ixp2000_pci_io_space;
+ sys->resource[1] = &ixp2000_pci_mem_space;
+ sys->resource[2] = NULL;
+
+ return 1;
+}
+
git://git.onelab.eu / linux-2.6.git / blobdiff