*
* Board setup for ADI Engineering and IXDGP425 boards
*
- * Copyright (C) 2003-2004 MontaVista Software, Inc.
+ * Copyright (C) 2003-2005 MontaVista Software, Inc.
*
* Author: Deepak Saxena <dsaxena@plexity.net>
*/
#include <linux/device.h>
#include <linux/serial.h>
#include <linux/tty.h>
-#include <linux/serial_core.h>
+#include <linux/serial_8250.h>
#include <asm/types.h>
#include <asm/setup.h>
#include <asm/mach/arch.h>
#include <asm/mach/flash.h>
-#ifdef __ARMEB__
-#define REG_OFFSET 3
-#else
-#define REG_OFFSET 0
-#endif
-
-/*
- * Only one serial port is connected on the Coyote & IXDPG425
- */
-static struct uart_port coyote_serial_port = {
- .membase = (char*)(IXP4XX_UART2_BASE_VIRT + REG_OFFSET),
- .mapbase = (IXP4XX_UART2_BASE_PHYS),
- .irq = IRQ_IXP4XX_UART2,
- .flags = UPF_SKIP_TEST,
- .iotype = UPIO_MEM,
- .regshift = 2,
- .uartclk = IXP4XX_UART_XTAL,
- .line = 0,
- .type = PORT_XSCALE,
- .fifosize = 32
-};
-
void __init coyote_map_io(void)
{
- if (machine_is_ixdpg425()) {
- coyote_serial_port.membase =
- (char*)(IXP4XX_UART1_BASE_VIRT + REG_OFFSET);
- coyote_serial_port.mapbase = IXP4XX_UART1_BASE_PHYS;
- coyote_serial_port.irq = IRQ_IXP4XX_UART1;
- }
-
- early_serial_setup(&coyote_serial_port);
-
ixp4xx_map_io();
}
.resource = &coyote_flash_resource,
};
+static struct resource coyote_uart_resource = {
+ .start = IXP4XX_UART2_BASE_PHYS,
+ .end = IXP4XX_UART2_BASE_PHYS + 0x0fff,
+ .flags = IORESOURCE_MEM,
+};
+
+static struct plat_serial8250_port coyote_uart_data = {
+ .mapbase = IXP4XX_UART2_BASE_PHYS,
+ .membase = (char *)IXP4XX_UART2_BASE_VIRT + REG_OFFSET,
+ .irq = IRQ_IXP4XX_UART2,
+ .flags = UPF_BOOT_AUTOCONF,
+ .iotype = UPIO_MEM,
+ .regshift = 2,
+ .uartclk = IXP4XX_UART_XTAL,
+};
+
+static struct platform_device coyote_uart = {
+ .name = "serial8250",
+ .id = 0,
+ .dev = {
+ .platform_data = &coyote_uart_data,
+ },
+ .num_resources = 1,
+ .resource = &coyote_uart_resource,
+};
+
static struct platform_device *coyote_devices[] __initdata = {
- &coyote_flash
+ &coyote_flash,
+ &coyote_uart
};
static void __init coyote_init(void)
*IXP4XX_EXP_CS0 |= IXP4XX_FLASH_WRITABLE;
*IXP4XX_EXP_CS1 = *IXP4XX_EXP_CS0;
+ if (machine_is_ixdpg425()) {
+ coyote_uart_data.membase =
+ (char*)(IXP4XX_UART1_BASE_VIRT + REG_OFFSET);
+ coyote_uart_data.mapbase = IXP4XX_UART1_BASE_PHYS;
+ coyote_uart_data.irq = IRQ_IXP4XX_UART1;
+ }
+
+
ixp4xx_sys_init();
platform_add_devices(coyote_devices, ARRAY_SIZE(coyote_devices));
}