#include <linux/kernel.h>
#include <linux/init.h>
#include <linux/device.h>
+#include <linux/delay.h>
+#include <linux/mtd/mtd.h>
+#include <linux/mtd/partitions.h>
#include <asm/hardware.h>
+#include <asm/mach-types.h>
#include <asm/mach/arch.h>
+#include <asm/mach/flash.h>
#include <asm/mach/map.h>
-#include <asm/arch/clocks.h>
-#include <asm/arch/gpio.h>
#include <asm/arch/fpga.h>
+#include <asm/arch/gpio.h>
+#include <asm/arch/tc.h>
+#include <asm/arch/usb.h>
#include "common.h"
-#ifdef CONFIG_ARCH_OMAP1510
+static int __initdata innovator_serial_ports[OMAP_MAX_NR_PORTS] = {1, 1, 1};
+
+static struct mtd_partition innovator_partitions[] = {
+ /* bootloader (U-Boot, etc) in first sector */
+ {
+ .name = "bootloader",
+ .offset = 0,
+ .size = SZ_128K,
+ .mask_flags = MTD_WRITEABLE, /* force read-only */
+ },
+ /* bootloader params in the next sector */
+ {
+ .name = "params",
+ .offset = MTDPART_OFS_APPEND,
+ .size = SZ_128K,
+ .mask_flags = 0,
+ },
+ /* kernel */
+ {
+ .name = "kernel",
+ .offset = MTDPART_OFS_APPEND,
+ .size = SZ_2M,
+ .mask_flags = 0
+ },
+ /* rest of flash1 is a file system */
+ {
+ .name = "rootfs",
+ .offset = MTDPART_OFS_APPEND,
+ .size = SZ_16M - SZ_2M - 2 * SZ_128K,
+ .mask_flags = 0
+ },
+ /* file system */
+ {
+ .name = "filesystem",
+ .offset = MTDPART_OFS_APPEND,
+ .size = MTDPART_SIZ_FULL,
+ .mask_flags = 0
+ }
+};
+
+static struct flash_platform_data innovator_flash_data = {
+ .map_name = "cfi_probe",
+ .width = 2,
+ .parts = innovator_partitions,
+ .nr_parts = ARRAY_SIZE(innovator_partitions),
+};
-extern int omap_gpio_init(void);
+static struct resource innovator_flash_resource = {
+ .start = OMAP_CS0_PHYS,
+ .end = OMAP_CS0_PHYS + SZ_32M - 1,
+ .flags = IORESOURCE_MEM,
+};
+
+static struct platform_device innovator_flash_device = {
+ .name = "omapflash",
+ .id = 0,
+ .dev = {
+ .platform_data = &innovator_flash_data,
+ },
+ .num_resources = 1,
+ .resource = &innovator_flash_resource,
+};
+
+#ifdef CONFIG_ARCH_OMAP1510
/* Only FPGA needs to be mapped here. All others are done with ioremap */
static struct map_desc innovator1510_io_desc[] __initdata = {
-{ OMAP1510P1_FPGA_BASE, OMAP1510P1_FPGA_START, OMAP1510P1_FPGA_SIZE,
+{ OMAP1510_FPGA_BASE, OMAP1510_FPGA_START, OMAP1510_FPGA_SIZE,
MT_DEVICE },
};
static struct resource innovator1510_smc91x_resources[] = {
[0] = {
- .start = OMAP1510P1_FPGA_ETHR_START, /* Physical */
- .end = OMAP1510P1_FPGA_ETHR_START + 16,
+ .start = OMAP1510_FPGA_ETHR_START, /* Physical */
+ .end = OMAP1510_FPGA_ETHR_START + 0xf,
.flags = IORESOURCE_MEM,
},
[1] = {
- .start = INT_ETHER,
- .end = INT_ETHER,
+ .start = OMAP1510_INT_ETHER,
+ .end = OMAP1510_INT_ETHER,
.flags = IORESOURCE_IRQ,
},
};
};
static struct platform_device *innovator1510_devices[] __initdata = {
+ &innovator_flash_device,
&innovator1510_smc91x_device,
};
#endif /* CONFIG_ARCH_OMAP1510 */
-#ifdef CONFIG_ARCH_OMAP1610
-
-static struct map_desc innovator1610_io_desc[] __initdata = {
-{ OMAP1610_ETHR_BASE, OMAP1610_ETHR_START, OMAP1610_ETHR_SIZE,MT_DEVICE },
-{ OMAP1610_NOR_FLASH_BASE, OMAP1610_NOR_FLASH_START, OMAP1610_NOR_FLASH_SIZE,
- MT_DEVICE },
-};
+#ifdef CONFIG_ARCH_OMAP16XX
static struct resource innovator1610_smc91x_resources[] = {
[0] = {
- .start = OMAP1610_ETHR_START, /* Physical */
- .end = OMAP1610_ETHR_START + SZ_4K,
+ .start = INNOVATOR1610_ETHR_START, /* Physical */
+ .end = INNOVATOR1610_ETHR_START + 0xf,
.flags = IORESOURCE_MEM,
},
[1] = {
- .start = 0, /* Really GPIO 0 */
- .end = 0,
+ .start = OMAP_GPIO_IRQ(0),
+ .end = OMAP_GPIO_IRQ(0),
.flags = IORESOURCE_IRQ,
},
};
};
static struct platform_device *innovator1610_devices[] __initdata = {
+ &innovator_flash_device,
&innovator1610_smc91x_device,
};
-#endif /* CONFIG_ARCH_OMAP1610 */
+#endif /* CONFIG_ARCH_OMAP16XX */
+
+static void __init innovator_init_smc91x(void)
+{
+ if (cpu_is_omap1510()) {
+ fpga_write(fpga_read(OMAP1510_FPGA_RST) & ~1,
+ OMAP1510_FPGA_RST);
+ udelay(750);
+ } else {
+ if ((omap_request_gpio(0)) < 0) {
+ printk("Error requesting gpio 0 for smc91x irq\n");
+ return;
+ }
+ omap_set_gpio_edge_ctrl(0, OMAP_GPIO_RISING_EDGE);
+ }
+}
void innovator_init_irq(void)
{
omap_init_irq();
+ omap_gpio_init();
#ifdef CONFIG_ARCH_OMAP1510
if (cpu_is_omap1510()) {
- omap_gpio_init();
- fpga_init_irq();
+ omap1510_fpga_init_irq();
}
#endif
+ innovator_init_smc91x();
}
+#ifdef CONFIG_ARCH_OMAP1510
+static struct omap_usb_config innovator1510_usb_config __initdata = {
+ /* for bundled non-standard host and peripheral cables */
+ .hmc_mode = 4,
+
+ .register_host = 1,
+ .pins[1] = 6,
+ .pins[2] = 6, /* Conflicts with UART2 */
+
+ .register_dev = 1,
+ .pins[0] = 2,
+};
+#endif
+
+#ifdef CONFIG_ARCH_OMAP16XX
+static struct omap_usb_config h2_usb_config __initdata = {
+ /* usb1 has a Mini-AB port and external isp1301 transceiver */
+ .otg = 2,
+
+#ifdef CONFIG_USB_GADGET_OMAP
+ .hmc_mode = 19, // 0:host(off) 1:dev|otg 2:disabled
+ // .hmc_mode = 21, // 0:host(off) 1:dev(loopback) 2:host(loopback)
+#elif defined(CONFIG_USB_OHCI_HCD) || defined(CONFIG_USB_OHCI_HCD_MODULE)
+ /* NONSTANDARD CABLE NEEDED (B-to-Mini-B) */
+ .hmc_mode = 20, // 1:dev|otg(off) 1:host 2:disabled
+#endif
+
+ .pins[1] = 3,
+};
+#endif
+
+static struct omap_board_config_kernel innovator_config[] = {
+ { OMAP_TAG_USB, NULL },
+};
+
static void __init innovator_init(void)
{
#ifdef CONFIG_ARCH_OMAP1510
platform_add_devices(innovator1510_devices, ARRAY_SIZE(innovator1510_devices));
}
#endif
-#ifdef CONFIG_ARCH_OMAP1610
- if (cpu_is_omap1610()) {
+#ifdef CONFIG_ARCH_OMAP16XX
+ if (!cpu_is_omap1510()) {
platform_add_devices(innovator1610_devices, ARRAY_SIZE(innovator1610_devices));
}
#endif
+
+#ifdef CONFIG_ARCH_OMAP1510
+ if (cpu_is_omap1510())
+ innovator_config[0].data = &innovator1510_usb_config;
+#endif
+#ifdef CONFIG_ARCH_OMAP16XX
+ if (cpu_is_omap1610())
+ innovator_config[0].data = &h2_usb_config;
+#endif
+ omap_board_config = innovator_config;
+ omap_board_config_size = ARRAY_SIZE(innovator_config);
}
static void __init innovator_map_io(void)
#ifdef CONFIG_ARCH_OMAP1510
if (cpu_is_omap1510()) {
iotable_init(innovator1510_io_desc, ARRAY_SIZE(innovator1510_io_desc));
+ udelay(10); /* Delay needed for FPGA */
/* Dump the Innovator FPGA rev early - useful info for support. */
printk("Innovator FPGA Rev %d.%d Board Rev %d\n",
- fpga_read(OMAP1510P1_FPGA_REV_HIGH),
- fpga_read(OMAP1510P1_FPGA_REV_LOW),
- fpga_read(OMAP1510P1_FPGA_BOARD_REV));
- }
-#endif
-#ifdef CONFIG_ARCH_OMAP1610
- if (cpu_is_omap1610()) {
- iotable_init(innovator1610_io_desc, ARRAY_SIZE(innovator1610_io_desc));
+ fpga_read(OMAP1510_FPGA_REV_HIGH),
+ fpga_read(OMAP1510_FPGA_REV_LOW),
+ fpga_read(OMAP1510_FPGA_BOARD_REV));
}
#endif
+ omap_serial_init(innovator_serial_ports);
}
MACHINE_START(OMAP_INNOVATOR, "TI-Innovator")
MAINTAINER("MontaVista Software, Inc.")
- BOOT_MEM(0x10000000, 0xe0000000, 0xe0000000)
+ BOOT_MEM(0x10000000, 0xfff00000, 0xfef00000)
BOOT_PARAMS(0x10000100)
MAPIO(innovator_map_io)
INITIRQ(innovator_init_irq)
INIT_MACHINE(innovator_init)
+ .timer = &omap_timer,
MACHINE_END
git://git.onelab.eu / linux-2.6.git / blobdiff