#include <linux/mtd/mtd.h>
#include <linux/mtd/partitions.h>
-#include <linux/input.h>
#include <asm/hardware.h>
#include <asm/mach-types.h>
#include <asm/arch/usb.h>
#include <asm/arch/mux.h>
#include <asm/arch/tc.h>
-#include <asm/arch/keypad.h>
#include <asm/arch/common.h>
-#include <asm/arch/mcbsp.h>
-#include <asm/arch/omap-alsa.h>
-
-static int osk_keymap[] = {
- KEY(0, 0, KEY_F1),
- KEY(0, 3, KEY_UP),
- KEY(1, 1, KEY_LEFTCTRL),
- KEY(1, 2, KEY_LEFT),
- KEY(2, 0, KEY_SPACE),
- KEY(2, 1, KEY_ESC),
- KEY(2, 2, KEY_DOWN),
- KEY(3, 2, KEY_ENTER),
- KEY(3, 3, KEY_RIGHT),
- 0
-};
-
static struct mtd_partition osk_partitions[] = {
/* bootloader (U-Boot, etc) in first sector */
.resource = osk5912_cf_resources,
};
-#define DEFAULT_BITPERSAMPLE 16
-
-static struct omap_mcbsp_reg_cfg mcbsp_regs = {
- .spcr2 = FREE | FRST | GRST | XRST | XINTM(3),
- .spcr1 = RINTM(3) | RRST,
- .rcr2 = RPHASE | RFRLEN2(OMAP_MCBSP_WORD_8) |
- RWDLEN2(OMAP_MCBSP_WORD_16) | RDATDLY(0),
- .rcr1 = RFRLEN1(OMAP_MCBSP_WORD_8) | RWDLEN1(OMAP_MCBSP_WORD_16),
- .xcr2 = XPHASE | XFRLEN2(OMAP_MCBSP_WORD_8) |
- XWDLEN2(OMAP_MCBSP_WORD_16) | XDATDLY(0) | XFIG,
- .xcr1 = XFRLEN1(OMAP_MCBSP_WORD_8) | XWDLEN1(OMAP_MCBSP_WORD_16),
- .srgr1 = FWID(DEFAULT_BITPERSAMPLE - 1),
- .srgr2 = GSYNC | CLKSP | FSGM | FPER(DEFAULT_BITPERSAMPLE * 2 - 1),
- /*.pcr0 = FSXM | FSRM | CLKXM | CLKRM | CLKXP | CLKRP,*/ /* mcbsp: master */
- .pcr0 = CLKXP | CLKRP, /* mcbsp: slave */
-};
-
-static struct omap_alsa_codec_config alsa_config = {
- .name = "OSK AIC23",
- .mcbsp_regs_alsa = &mcbsp_regs,
- .codec_configure_dev = NULL, // aic23_configure,
- .codec_set_samplerate = NULL, // aic23_set_samplerate,
- .codec_clock_setup = NULL, // aic23_clock_setup,
- .codec_clock_on = NULL, // aic23_clock_on,
- .codec_clock_off = NULL, // aic23_clock_off,
- .get_default_samplerate = NULL, // aic23_get_default_samplerate,
-};
-
static struct platform_device osk5912_mcbsp1_device = {
- .name = "omap_alsa_mcbsp",
- .id = 1,
- .dev = {
- .platform_data = &alsa_config,
- },
-};
-
-static struct resource osk5912_kp_resources[] = {
- [0] = {
- .start = INT_KEYBOARD,
- .end = INT_KEYBOARD,
- .flags = IORESOURCE_IRQ,
- },
-};
-
-static struct omap_kp_platform_data osk_kp_data = {
- .rows = 8,
- .cols = 8,
- .keymap = osk_keymap,
-};
-
-static struct platform_device osk5912_kp_device = {
- .name = "omap-keypad",
- .id = -1,
- .dev = {
- .platform_data = &osk_kp_data,
- },
- .num_resources = ARRAY_SIZE(osk5912_kp_resources),
- .resource = osk5912_kp_resources,
-};
-
-static struct platform_device osk5912_lcd_device = {
- .name = "lcd_osk",
- .id = -1,
+ .name = "omap_mcbsp",
+ .id = 1,
};
static struct platform_device *osk5912_devices[] __initdata = {
&osk5912_smc91x_device,
&osk5912_cf_device,
&osk5912_mcbsp1_device,
- &osk5912_kp_device,
- &osk5912_lcd_device,
};
static void __init osk_init_smc91x(void)
};
static struct omap_lcd_config osk_lcd_config __initdata = {
+ .panel_name = "osk",
.ctrl_name = "internal",
};
static void __init osk_mistral_init(void) { }
#endif
-#define EMIFS_CS3_VAL (0x88013141)
-
static void __init osk_init(void)
{
- /* Workaround for wrong CS3 (NOR flash) timing
- * There are some U-Boot versions out there which configure
- * wrong CS3 memory timings. This mainly leads to CRC
- * or similiar errors if you use NOR flash (e.g. with JFFS2)
- */
- if (EMIFS_CCS(3) != EMIFS_CS3_VAL)
- EMIFS_CCS(3) = EMIFS_CS3_VAL;
-
osk_flash_resource.end = osk_flash_resource.start = omap_cs3_phys();
osk_flash_resource.end += SZ_32M - 1;
platform_add_devices(osk5912_devices, ARRAY_SIZE(osk5912_devices));