#include <linux/platform_device.h>
#include <linux/delay.h>
#include <linux/mtd/mtd.h>
-#include <linux/mtd/nand.h>
#include <linux/mtd/partitions.h>
-#include <linux/input.h>
#include <asm/hardware.h>
#include <asm/mach-types.h>
#include <asm/arch/gpio.h>
#include <asm/arch/mux.h>
#include <asm/arch/fpga.h>
-#include <asm/arch/keypad.h>
#include <asm/arch/common.h>
#include <asm/arch/board.h>
-static int p2_keymap[] = {
- KEY(0,0,KEY_UP),
- KEY(0,1,KEY_RIGHT),
- KEY(0,2,KEY_LEFT),
- KEY(0,3,KEY_DOWN),
- KEY(0,4,KEY_CENTER),
- KEY(0,5,KEY_0_5),
- KEY(1,0,KEY_SOFT2),
- KEY(1,1,KEY_SEND),
- KEY(1,2,KEY_END),
- KEY(1,3,KEY_VOLUMEDOWN),
- KEY(1,4,KEY_VOLUMEUP),
- KEY(1,5,KEY_RECORD),
- KEY(2,0,KEY_SOFT1),
- KEY(2,1,KEY_3),
- KEY(2,2,KEY_6),
- KEY(2,3,KEY_9),
- KEY(2,4,KEY_SHARP),
- KEY(2,5,KEY_2_5),
- KEY(3,0,KEY_BACK),
- KEY(3,1,KEY_2),
- KEY(3,2,KEY_5),
- KEY(3,3,KEY_8),
- KEY(3,4,KEY_0),
- KEY(3,5,KEY_HEADSETHOOK),
- KEY(4,0,KEY_HOME),
- KEY(4,1,KEY_1),
- KEY(4,2,KEY_4),
- KEY(4,3,KEY_7),
- KEY(4,4,KEY_STAR),
- KEY(4,5,KEY_POWER),
- 0
-};
-
static struct resource smc91x_resources[] = {
[0] = {
.start = H2P2_DBG_FPGA_ETHR_START, /* Physical */
},
};
-static struct mtd_partition nor_partitions[] = {
+static struct mtd_partition p2_partitions[] = {
/* bootloader (U-Boot, etc) in first sector */
{
.name = "bootloader",
},
};
-static struct flash_platform_data nor_data = {
+static struct flash_platform_data p2_flash_data = {
.map_name = "cfi_probe",
.width = 2,
- .parts = nor_partitions,
- .nr_parts = ARRAY_SIZE(nor_partitions),
+ .parts = p2_partitions,
+ .nr_parts = ARRAY_SIZE(p2_partitions),
};
-static struct resource nor_resource = {
+static struct resource p2_flash_resource = {
.start = OMAP_CS0_PHYS,
.end = OMAP_CS0_PHYS + SZ_32M - 1,
.flags = IORESOURCE_MEM,
};
-static struct platform_device nor_device = {
+static struct platform_device p2_flash_device = {
.name = "omapflash",
.id = 0,
.dev = {
- .platform_data = &nor_data,
- },
- .num_resources = 1,
- .resource = &nor_resource,
-};
-
-static struct nand_platform_data nand_data = {
- .options = NAND_SAMSUNG_LP_OPTIONS,
-};
-
-static struct resource nand_resource = {
- .start = OMAP_CS3_PHYS,
- .end = OMAP_CS3_PHYS + SZ_4K - 1,
- .flags = IORESOURCE_MEM,
-};
-
-static struct platform_device nand_device = {
- .name = "omapnand",
- .id = 0,
- .dev = {
- .platform_data = &nand_data,
+ .platform_data = &p2_flash_data,
},
.num_resources = 1,
- .resource = &nand_resource,
+ .resource = &p2_flash_resource,
};
static struct platform_device smc91x_device = {
.resource = smc91x_resources,
};
-static struct resource kp_resources[] = {
- [0] = {
- .start = INT_730_MPUIO_KEYPAD,
- .end = INT_730_MPUIO_KEYPAD,
- .flags = IORESOURCE_IRQ,
- },
-};
-
-static struct omap_kp_platform_data kp_data = {
- .rows = 8,
- .cols = 8,
- .keymap = p2_keymap,
-};
-
-static struct platform_device kp_device = {
- .name = "omap-keypad",
- .id = -1,
- .dev = {
- .platform_data = &kp_data,
- },
- .num_resources = ARRAY_SIZE(kp_resources),
- .resource = kp_resources,
-};
-
-static struct platform_device lcd_device = {
- .name = "lcd_p2",
- .id = -1,
-};
-
static struct platform_device *devices[] __initdata = {
- &nor_device,
- &nand_device,
+ &p2_flash_device,
&smc91x_device,
- &kp_device,
- &lcd_device,
};
-#define P2_NAND_RB_GPIO_PIN 62
-
-static int nand_dev_ready(struct nand_platform_data *data)
-{
- return omap_get_gpio_datain(P2_NAND_RB_GPIO_PIN);
-}
-
static struct omap_uart_config perseus2_uart_config __initdata = {
.enabled_uarts = ((1 << 0) | (1 << 1)),
};
static struct omap_lcd_config perseus2_lcd_config __initdata = {
+ .panel_name = "p2",
.ctrl_name = "internal",
};
static void __init omap_perseus2_init(void)
{
- if (!(omap_request_gpio(P2_NAND_RB_GPIO_PIN)))
- nand_data.dev_ready = nand_dev_ready;
-
- omap_cfg_reg(L3_1610_FLASH_CS2B_OE);
- omap_cfg_reg(M8_1610_FLASH_CS2B_WE);
-
- platform_add_devices(devices, ARRAY_SIZE(devices));
+ (void) platform_add_devices(devices, ARRAY_SIZE(devices));
omap_board_config = perseus2_config;
omap_board_config_size = ARRAY_SIZE(perseus2_config);