--- /dev/null
+/*
+ * linux/arch/arm/mach-omap/omap2/board-apollon.c
+ *
+ * Copyright (C) 2005,2006 Samsung Electronics
+ * Author: Kyungmin Park <kyungmin.park@samsung.com>
+ *
+ * Modified from mach-omap/omap2/board-h4.c
+ *
+ * Code for apollon OMAP2 board. Should work on many OMAP2 systems where
+ * the bootloader passes the board-specific data to the kernel.
+ * Do not put any board specific code to this file; create a new machine
+ * type if you need custom low-level initializations.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/platform_device.h>
+#include <linux/mtd/mtd.h>
+#include <linux/mtd/partitions.h>
+#include <linux/mtd/onenand.h>
+#include <linux/interrupt.h>
+#include <linux/delay.h>
+
+#include <asm/hardware.h>
+#include <asm/mach-types.h>
+#include <asm/mach/arch.h>
+#include <asm/mach/flash.h>
+
+#include <asm/arch/gpio.h>
+#include <asm/arch/mux.h>
+#include <asm/arch/usb.h>
+#include <asm/arch/board.h>
+#include <asm/arch/common.h>
+#include "prcm-regs.h"
+
+/* LED & Switch macros */
+#define LED0_GPIO13 13
+#define LED1_GPIO14 14
+#define LED2_GPIO15 15
+#define SW_ENTER_GPIO16 16
+#define SW_UP_GPIO17 17
+#define SW_DOWN_GPIO58 58
+
+static struct mtd_partition apollon_partitions[] = {
+ {
+ .name = "X-Loader + U-Boot",
+ .offset = 0,
+ .size = SZ_128K,
+ .mask_flags = MTD_WRITEABLE,
+ },
+ {
+ .name = "params",
+ .offset = MTDPART_OFS_APPEND,
+ .size = SZ_128K,
+ },
+ {
+ .name = "kernel",
+ .offset = MTDPART_OFS_APPEND,
+ .size = SZ_2M,
+ },
+ {
+ .name = "rootfs",
+ .offset = MTDPART_OFS_APPEND,
+ .size = SZ_16M,
+ },
+ {
+ .name = "filesystem00",
+ .offset = MTDPART_OFS_APPEND,
+ .size = SZ_32M,
+ },
+ {
+ .name = "filesystem01",
+ .offset = MTDPART_OFS_APPEND,
+ .size = MTDPART_SIZ_FULL,
+ },
+};
+
+static struct flash_platform_data apollon_flash_data = {
+ .parts = apollon_partitions,
+ .nr_parts = ARRAY_SIZE(apollon_partitions),
+};
+
+static struct resource apollon_flash_resource = {
+ .start = APOLLON_CS0_BASE,
+ .end = APOLLON_CS0_BASE + SZ_128K,
+ .flags = IORESOURCE_MEM,
+};
+
+static struct platform_device apollon_onenand_device = {
+ .name = "onenand",
+ .id = -1,
+ .dev = {
+ .platform_data = &apollon_flash_data,
+ },
+ .num_resources = ARRAY_SIZE(&apollon_flash_resource),
+ .resource = &apollon_flash_resource,
+};
+
+static struct resource apollon_smc91x_resources[] = {
+ [0] = {
+ .start = APOLLON_ETHR_START, /* Physical */
+ .end = APOLLON_ETHR_START + 0xf,
+ .flags = IORESOURCE_MEM,
+ },
+ [1] = {
+ .start = OMAP_GPIO_IRQ(APOLLON_ETHR_GPIO_IRQ),
+ .end = OMAP_GPIO_IRQ(APOLLON_ETHR_GPIO_IRQ),
+ .flags = IORESOURCE_IRQ,
+ },
+};
+
+static struct platform_device apollon_smc91x_device = {
+ .name = "smc91x",
+ .id = -1,
+ .num_resources = ARRAY_SIZE(apollon_smc91x_resources),
+ .resource = apollon_smc91x_resources,
+};
+
+static struct platform_device apollon_lcd_device = {
+ .name = "apollon_lcd",
+ .id = -1,
+};
+
+static struct platform_device *apollon_devices[] __initdata = {
+ &apollon_onenand_device,
+ &apollon_smc91x_device,
+ &apollon_lcd_device,
+};
+
+static inline void __init apollon_init_smc91x(void)
+{
+ /* Make sure CS1 timings are correct */
+ GPMC_CONFIG1_1 = 0x00011203;
+ GPMC_CONFIG2_1 = 0x001f1f01;
+ GPMC_CONFIG3_1 = 0x00080803;
+ GPMC_CONFIG4_1 = 0x1c091c09;
+ GPMC_CONFIG5_1 = 0x041f1f1f;
+ GPMC_CONFIG6_1 = 0x000004c4;
+ GPMC_CONFIG7_1 = 0x00000f40 | (APOLLON_CS1_BASE >> 24);
+ udelay(100);
+
+ omap_cfg_reg(W4__24XX_GPIO74);
+ if (omap_request_gpio(APOLLON_ETHR_GPIO_IRQ) < 0) {
+ printk(KERN_ERR "Failed to request GPIO%d for smc91x IRQ\n",
+ APOLLON_ETHR_GPIO_IRQ);
+ return;
+ }
+ omap_set_gpio_direction(APOLLON_ETHR_GPIO_IRQ, 1);
+}
+
+static void __init omap_apollon_init_irq(void)
+{
+ omap2_init_common_hw();
+ omap_init_irq();
+ omap_gpio_init();
+ apollon_init_smc91x();
+}
+
+static struct omap_uart_config apollon_uart_config __initdata = {
+ .enabled_uarts = (1 << 0) | (0 << 1) | (0 << 2),
+};
+
+static struct omap_mmc_config apollon_mmc_config __initdata = {
+ .mmc [0] = {
+ .enabled = 0,
+ .wire4 = 0,
+ .wp_pin = -1,
+ .power_pin = -1,
+ .switch_pin = -1,
+ },
+};
+
+static struct omap_lcd_config apollon_lcd_config __initdata = {
+ .ctrl_name = "internal",
+};
+
+static struct omap_board_config_kernel apollon_config[] = {
+ { OMAP_TAG_UART, &apollon_uart_config },
+ { OMAP_TAG_MMC, &apollon_mmc_config },
+ { OMAP_TAG_LCD, &apollon_lcd_config },
+};
+
+static void __init apollon_led_init(void)
+{
+ /* LED0 - AA10 */
+ omap_cfg_reg(AA10_242X_GPIO13);
+ omap_request_gpio(LED0_GPIO13);
+ omap_set_gpio_direction(LED0_GPIO13, 0);
+ omap_set_gpio_dataout(LED0_GPIO13, 0);
+ /* LED1 - AA6 */
+ omap_cfg_reg(AA6_242X_GPIO14);
+ omap_request_gpio(LED1_GPIO14);
+ omap_set_gpio_direction(LED1_GPIO14, 0);
+ omap_set_gpio_dataout(LED1_GPIO14, 0);
+ /* LED2 - AA4 */
+ omap_cfg_reg(AA4_242X_GPIO15);
+ omap_request_gpio(LED2_GPIO15);
+ omap_set_gpio_direction(LED2_GPIO15, 0);
+ omap_set_gpio_dataout(LED2_GPIO15, 0);
+}
+
+static irqreturn_t apollon_sw_interrupt(int irq, void *ignored, struct pt_regs *regs)
+{
+ static unsigned int led0, led1, led2;
+
+ if (irq == OMAP_GPIO_IRQ(SW_ENTER_GPIO16))
+ omap_set_gpio_dataout(LED0_GPIO13, led0 ^= 1);
+ else if (irq == OMAP_GPIO_IRQ(SW_UP_GPIO17))
+ omap_set_gpio_dataout(LED1_GPIO14, led1 ^= 1);
+ else if (irq == OMAP_GPIO_IRQ(SW_DOWN_GPIO58))
+ omap_set_gpio_dataout(LED2_GPIO15, led2 ^= 1);
+
+ return IRQ_HANDLED;
+}
+
+static void __init apollon_sw_init(void)
+{
+ /* Enter SW - Y11 */
+ omap_cfg_reg(Y11_242X_GPIO16);
+ omap_request_gpio(SW_ENTER_GPIO16);
+ omap_set_gpio_direction(SW_ENTER_GPIO16, 1);
+ /* Up SW - AA12 */
+ omap_cfg_reg(AA12_242X_GPIO17);
+ omap_request_gpio(SW_UP_GPIO17);
+ omap_set_gpio_direction(SW_UP_GPIO17, 1);
+ /* Down SW - AA8 */
+ omap_cfg_reg(AA8_242X_GPIO58);
+ omap_request_gpio(SW_DOWN_GPIO58);
+ omap_set_gpio_direction(SW_DOWN_GPIO58, 1);
+
+ set_irq_type(OMAP_GPIO_IRQ(SW_ENTER_GPIO16), IRQT_RISING);
+ if (request_irq(OMAP_GPIO_IRQ(SW_ENTER_GPIO16), &apollon_sw_interrupt,
+ SA_SHIRQ, "enter sw",
+ &apollon_sw_interrupt))
+ return;
+ set_irq_type(OMAP_GPIO_IRQ(SW_UP_GPIO17), IRQT_RISING);
+ if (request_irq(OMAP_GPIO_IRQ(SW_UP_GPIO17), &apollon_sw_interrupt,
+ SA_SHIRQ, "up sw",
+ &apollon_sw_interrupt))
+ return;
+ set_irq_type(OMAP_GPIO_IRQ(SW_DOWN_GPIO58), IRQT_RISING);
+ if (request_irq(OMAP_GPIO_IRQ(SW_DOWN_GPIO58), &apollon_sw_interrupt,
+ SA_SHIRQ, "down sw",
+ &apollon_sw_interrupt))
+ return;
+}
+
+static void __init omap_apollon_init(void)
+{
+ apollon_led_init();
+ apollon_sw_init();
+
+ /* REVISIT: where's the correct place */
+ omap_cfg_reg(W19_24XX_SYS_NIRQ);
+
+ /*
+ * Make sure the serial ports are muxed on at this point.
+ * You have to mux them off in device drivers later on
+ * if not needed.
+ */
+ platform_add_devices(apollon_devices, ARRAY_SIZE(apollon_devices));
+ omap_board_config = apollon_config;
+ omap_board_config_size = ARRAY_SIZE(apollon_config);
+ omap_serial_init();
+}
+
+static void __init omap_apollon_map_io(void)
+{
+ omap2_map_common_io();
+}
+
+MACHINE_START(OMAP_APOLLON, "OMAP24xx Apollon")
+ /* Maintainer: Kyungmin Park <kyungmin.park@samsung.com> */
+ .phys_io = 0x48000000,
+ .io_pg_offst = ((0xd8000000) >> 18) & 0xfffc,
+ .boot_params = 0x80000100,
+ .map_io = omap_apollon_map_io,
+ .init_irq = omap_apollon_init_irq,
+ .init_machine = omap_apollon_init,
+ .timer = &omap_timer,
+MACHINE_END
git://git.onelab.eu / linux-2.6.git / blobdiff