#include <linux/interrupt.h>
#include <linux/sched.h>
#include <linux/bitops.h>
+#include <linux/fb.h>
#include <asm/types.h>
#include <asm/setup.h>
#include <asm/mach/map.h>
#include <asm/mach/irq.h>
+#include <asm/arch/pxa-regs.h>
#include <asm/arch/mainstone.h>
+#include <asm/arch/audio.h>
+#include <asm/arch/pxafb.h>
+#include <asm/arch/mmc.h>
#include "generic.h"
.resource = smc91x_resources,
};
+static int mst_audio_startup(snd_pcm_substream_t *substream, void *priv)
+{
+ if (substream->stream == SNDRV_PCM_STREAM_PLAYBACK)
+ MST_MSCWR2 &= ~MST_MSCWR2_AC97_SPKROFF;
+ return 0;
+}
+
+static void mst_audio_shutdown(snd_pcm_substream_t *substream, void *priv)
+{
+ if (substream->stream == SNDRV_PCM_STREAM_PLAYBACK)
+ MST_MSCWR2 |= MST_MSCWR2_AC97_SPKROFF;
+}
+
+static long mst_audio_suspend_mask;
+
+static void mst_audio_suspend(void *priv)
+{
+ mst_audio_suspend_mask = MST_MSCWR2;
+ MST_MSCWR2 |= MST_MSCWR2_AC97_SPKROFF;
+}
+
+static void mst_audio_resume(void *priv)
+{
+ MST_MSCWR2 &= mst_audio_suspend_mask | ~MST_MSCWR2_AC97_SPKROFF;
+}
+
+static pxa2xx_audio_ops_t mst_audio_ops = {
+ .startup = mst_audio_startup,
+ .shutdown = mst_audio_shutdown,
+ .suspend = mst_audio_suspend,
+ .resume = mst_audio_resume,
+};
+
+static struct platform_device mst_audio_device = {
+ .name = "pxa2xx-ac97",
+ .id = -1,
+ .dev = { .platform_data = &mst_audio_ops },
+};
+
+static void mainstone_backlight_power(int on)
+{
+ if (on) {
+ pxa_gpio_mode(GPIO16_PWM0_MD);
+ pxa_set_cken(CKEN0_PWM0, 1);
+ PWM_CTRL0 = 0;
+ PWM_PWDUTY0 = 0x3ff;
+ PWM_PERVAL0 = 0x3ff;
+ } else {
+ PWM_CTRL0 = 0;
+ PWM_PWDUTY0 = 0x0;
+ PWM_PERVAL0 = 0x3FF;
+ pxa_set_cken(CKEN0_PWM0, 0);
+ }
+}
+
+static struct pxafb_mach_info toshiba_ltm04c380k __initdata = {
+ .pixclock = 50000,
+ .xres = 640,
+ .yres = 480,
+ .bpp = 16,
+ .hsync_len = 1,
+ .left_margin = 0x9f,
+ .right_margin = 1,
+ .vsync_len = 44,
+ .upper_margin = 0,
+ .lower_margin = 0,
+ .sync = FB_SYNC_HOR_HIGH_ACT|FB_SYNC_VERT_HIGH_ACT,
+ .lccr0 = LCCR0_Act,
+ .lccr3 = LCCR3_PCP,
+ .pxafb_backlight_power = mainstone_backlight_power,
+};
+
+static struct pxafb_mach_info toshiba_ltm035a776c __initdata = {
+ .pixclock = 110000,
+ .xres = 240,
+ .yres = 320,
+ .bpp = 16,
+ .hsync_len = 4,
+ .left_margin = 8,
+ .right_margin = 20,
+ .vsync_len = 3,
+ .upper_margin = 1,
+ .lower_margin = 10,
+ .sync = FB_SYNC_HOR_HIGH_ACT|FB_SYNC_VERT_HIGH_ACT,
+ .lccr0 = LCCR0_Act,
+ .lccr3 = LCCR3_PCP,
+ .pxafb_backlight_power = mainstone_backlight_power,
+};
+
+static int mainstone_mci_init(struct device *dev, irqreturn_t (*mstone_detect_int)(int, void *, struct pt_regs *), void *data)
+{
+ int err;
+
+ /*
+ * setup GPIO for PXA27x MMC controller
+ */
+ pxa_gpio_mode(GPIO32_MMCCLK_MD);
+ pxa_gpio_mode(GPIO112_MMCCMD_MD);
+ pxa_gpio_mode(GPIO92_MMCDAT0_MD);
+ pxa_gpio_mode(GPIO109_MMCDAT1_MD);
+ pxa_gpio_mode(GPIO110_MMCDAT2_MD);
+ pxa_gpio_mode(GPIO111_MMCDAT3_MD);
+
+ /* make sure SD/Memory Stick multiplexer's signals
+ * are routed to MMC controller
+ */
+ MST_MSCWR1 &= ~MST_MSCWR1_MS_SEL;
+
+ err = request_irq(MAINSTONE_MMC_IRQ, mstone_detect_int, SA_INTERRUPT,
+ "MMC card detect", data);
+ if (err) {
+ printk(KERN_ERR "mainstone_mci_init: MMC/SD: can't request MMC card detect IRQ\n");
+ return -1;
+ }
+
+ return 0;
+}
+
+static void mainstone_mci_setpower(struct device *dev, unsigned int vdd)
+{
+ struct pxamci_platform_data* p_d = dev->platform_data;
+
+ if (( 1 << vdd) & p_d->ocr_mask) {
+ printk(KERN_DEBUG "%s: on\n", __FUNCTION__);
+ MST_MSCWR1 |= MST_MSCWR1_MMC_ON;
+ MST_MSCWR1 &= ~MST_MSCWR1_MS_SEL;
+ } else {
+ printk(KERN_DEBUG "%s: off\n", __FUNCTION__);
+ MST_MSCWR1 &= ~MST_MSCWR1_MMC_ON;
+ }
+}
+
+static void mainstone_mci_exit(struct device *dev, void *data)
+{
+ free_irq(MAINSTONE_MMC_IRQ, data);
+}
+
+static struct pxamci_platform_data mainstone_mci_platform_data = {
+ .ocr_mask = MMC_VDD_32_33|MMC_VDD_33_34,
+ .init = mainstone_mci_init,
+ .setpower = mainstone_mci_setpower,
+ .exit = mainstone_mci_exit,
+};
+
static void __init mainstone_init(void)
{
- platform_add_device(&smc91x_device);
+ /*
+ * On Mainstone, we route AC97_SYSCLK via GPIO45 to
+ * the audio daughter card
+ */
+ pxa_gpio_mode(GPIO45_SYSCLK_AC97_MD);
+
+ platform_device_register(&smc91x_device);
+ platform_device_register(&mst_audio_device);
+
+ /* reading Mainstone's "Virtual Configuration Register"
+ might be handy to select LCD type here */
+ if (0)
+ set_pxa_fb_info(&toshiba_ltm04c380k);
+ else
+ set_pxa_fb_info(&toshiba_ltm035a776c);
+
+ pxa_set_mci_info(&mainstone_mci_platform_data);
}
BOOT_MEM(0xa0000000, 0x40000000, io_p2v(0x40000000))
MAPIO(mainstone_map_io)
INITIRQ(mainstone_init_irq)
+ .timer = &pxa_timer,
INIT_MACHINE(mainstone_init)
MACHINE_END
git://git.onelab.eu / linux-2.6.git / blobdiff