Fedora kernel-2.6.17-1.2142_FC4 patched with stable patch-2.6.17.4-vs2.0.2-rc26.diff

[linux-2.6.git] / arch / arm / mach-s3c2410 / Kconfig

diff --git a/arch/arm/mach-s3c2410/Kconfig b/arch/arm/mach-s3c2410/Kconfig
index b1b216e..970f98d 100644 (file)
--- a/arch/arm/mach-s3c2410/Kconfig
+++ b/arch/arm/mach-s3c2410/Kconfig
@@ -2,15 +2,38 @@ if ARCH_S3C2410
 
 menu "S3C24XX Implementations"
 
+config MACH_ANUBIS
+       bool "Simtec Electronics ANUBIS"
+       select CPU_S3C2440
+       help
+         Say Y gere if you are using the Simtec Electronics ANUBIS
+         development system
+
+config MACH_OSIRIS
+       bool "Simtec IM2440D20 (OSIRIS) module"
+       select CPU_S3C2440
+       help
+         Say Y here if you are using the Simtec IM2440D20 module, also
+         known as the Osiris.
+
 config ARCH_BAST
        bool "Simtec Electronics BAST (EB2410ITX)"
        select CPU_S3C2410
+       select ISA
        help
          Say Y here if you are using the Simtec Electronics EB2410ITX
          development board (also known as BAST)
 
          Product page: <http://www.simtec.co.uk/products/EB2410ITX/>.
 
+config BAST_PC104_IRQ
+       bool "BAST PC104 IRQ support"
+       depends on ARCH_BAST
+       default y
+       help
+         Say Y here to enable the PC104 IRQ routing on the
+         Simtec BAST (EB2410ITX)
+
 config ARCH_H1940
        bool "IPAQ H1940"
        select CPU_S3C2410
@@ -19,13 +42,34 @@ config ARCH_H1940
 
          <http://www.handhelds.org/projects/h1940.html>.
 
+config MACH_N30
+       bool "Acer N30"
+       select CPU_S3C2410
+       help
+         Say Y here if you are using the Acer N30
+
+         <http://zoo.weinigel.se/n30>.
+
+config MACH_SMDK
+       bool
+       help
+         Common machine code for SMDK2410 and SMDK2440
+
 config ARCH_SMDK2410
        bool "SMDK2410/A9M2410"
        select CPU_S3C2410
+       select MACH_SMDK
        help
           Say Y here if you are using the SMDK2410 or the derived module A9M2410
            <http://www.fsforth.de>
 
+config ARCH_S3C2440
+       bool "SMDK2440"
+       select CPU_S3C2440
+       select MACH_SMDK
+       help
+         Say Y here if you are using the SMDK2440.
+
 config MACH_VR1000
        bool "Thorcom VR1000"
        select CPU_S3C2410
@@ -44,6 +88,18 @@ config MACH_RX3715
          See <http://www.handhelds.org/projects/rx3715.html> for more
          information on this project
 
+config MACH_OTOM
+       bool "NexVision OTOM Board"
+       select CPU_S3C2410
+       help
+         Say Y here if you are using the Nex Vision OTOM board
+
+config MACH_NEXCODER_2440
+       bool "NexVision NEXCODER 2440 Light Board"
+       select CPU_S3C2440
+       help
+         Say Y here if you are using the Nex Vision NEXCODER 2440 Light Board
+
 endmenu
 
 config CPU_S3C2410
@@ -59,6 +115,34 @@ config CPU_S3C2440
        help
          Support for S3C2440 Samsung Mobile CPU based systems.
 
+comment "S3C2410 Boot"
+
+config S3C2410_BOOT_WATCHDOG
+       bool "S3C2410 Initialisation watchdog"
+       depends on ARCH_S3C2410 && S3C2410_WATCHDOG
+       help
+         Say y to enable the watchdog during the kernel decompression
+         stage. If the kernel fails to uncompress, then the watchdog
+         will trigger a reset and the system should restart.
+
+         Although this uses the same hardware unit as the kernel watchdog
+         driver, it is not a replacement for it. If you use this option,
+         you will have to use the watchdg driver to either stop the timeout
+         or restart it. If you do not, then your kernel will reboot after
+         startup.
+
+         The driver uses a fixed timeout value, so the exact time till the
+         system resets depends on the value of PCLK. The timeout on an
+         200MHz s3c2410 should be about 30 seconds.
+
+config S3C2410_BOOT_ERROR_RESET
+       bool "S3C2410 Reboot on decompression error"
+       depends on ARCH_S3C2410
+       help
+         Say y here to use the watchdog to reset the system if the
+         kernel decompressor detects an error during decompression.
+
+
 comment "S3C2410 Setup"
 
 config S3C2410_DMA
@@ -86,7 +170,7 @@ config S3C2410_PM_DEBUG
        depends on ARCH_S3C2410 && PM
        help
          Say Y here if you want verbose debugging from the PM Suspend and
-         Resume code. See `Documentation/arm/Samsing-S3C24XX/Suspend.txt`
+         Resume code. See <file:Documentation/arm/Samsung-S3C24XX/Suspend.txt>
          for more information.
 
 config S3C2410_PM_CHECK
@@ -108,6 +192,11 @@ config S3C2410_PM_CHECK_CHUNKSIZE
          the CRC data block will take more memory, but wil identify any
          faults with better precision.
 
+config PM_SIMTEC
+       bool
+       depends on PM && (ARCH_BAST || MACH_VR1000)
+       default y
+
 config S3C2410_LOWLEVEL_UART_PORT
        int "S3C2410 UART to use for low-level messages"
        default 0