menu "S3C24XX Implementations"
+config MACH_AML_M5900
+ bool "AML M5900 Series"
+ select CPU_S3C2410
+ select PM_SIMTEC if PM
+ help
+ Say Y here if you are using the American Microsystems M5900 Series
+ <http://www.amltd.com>
+
+config MACH_ANUBIS
+ bool "Simtec Electronics ANUBIS"
+ select CPU_S3C2440
+ select PM_SIMTEC if PM
+ help
+ Say Y here if you are using the Simtec Electronics ANUBIS
+ development system
+
+config MACH_OSIRIS
+ bool "Simtec IM2440D20 (OSIRIS) module"
+ select CPU_S3C2440
+ select PM_SIMTEC if PM
+ help
+ Say Y here if you are using the Simtec IM2440D20 module, also
+ known as the Osiris.
+
config ARCH_BAST
bool "Simtec Electronics BAST (EB2410ITX)"
select CPU_S3C2410
+ select PM_SIMTEC if PM
+ select ISA
help
Say Y here if you are using the Simtec Electronics EB2410ITX
development board (also known as BAST)
Product page: <http://www.simtec.co.uk/products/EB2410ITX/>.
+config BAST_PC104_IRQ
+ bool "BAST PC104 IRQ support"
+ depends on ARCH_BAST
+ default y
+ help
+ Say Y here to enable the PC104 IRQ routing on the
+ Simtec BAST (EB2410ITX)
+
+config PM_H1940
+ bool
+ help
+ Internal node for H1940 and related PM
+
config ARCH_H1940
bool "IPAQ H1940"
select CPU_S3C2410
+ select PM_H1940 if PM
help
Say Y here if you are using the HP IPAQ H1940
<http://zoo.weinigel.se/n30>.
+config MACH_SMDK
+ bool
+ help
+ Common machine code for SMDK2410 and SMDK2440
+
config ARCH_SMDK2410
bool "SMDK2410/A9M2410"
select CPU_S3C2410
+ select MACH_SMDK
help
Say Y here if you are using the SMDK2410 or the derived module A9M2410
<http://www.fsforth.de>
config ARCH_S3C2440
bool "SMDK2440"
select CPU_S3C2440
+ select MACH_SMDK
help
Say Y here if you are using the SMDK2440.
+config SMDK2440_CPU2440
+ bool "SMDK2440 with S3C2440 CPU module"
+ depends on ARCH_S3C2440
+ default y if ARCH_S3C2440
+ select CPU_S3C2440
+
+config SMDK2440_CPU2442
+ bool "SMDM2440 with S3C2442 CPU module"
+ depends on ARCH_S3C2440
+ select CPU_S3C2442
+
+config MACH_S3C2413
+ bool
+ help
+ Internal node for S3C2413 version of SMDK2413, so that
+ machine_is_s3c2413() will work when MACH_SMDK2413 is
+ selected
+
+config MACH_SMDK2413
+ bool "SMDK2413"
+ select CPU_S3C2412
+ select MACH_S3C2413
+ select MACH_SMDK
+ help
+ Say Y here if you are using an SMDK2413
+
config MACH_VR1000
bool "Thorcom VR1000"
+ select PM_SIMTEC if PM
select CPU_S3C2410
help
Say Y here if you are using the Thorcom VR1000 board.
config MACH_RX3715
bool "HP iPAQ rx3715"
select CPU_S3C2440
+ select PM_H1940 if PM
help
Say Y here if you are using the HP iPAQ rx3715.
help
Say Y here if you are using the Nex Vision NEXCODER 2440 Light Board
+config MACH_VSTMS
+ bool "VMSTMS"
+ select CPU_S3C2412
+ help
+ Say Y here if you are using an VSTMS board
+
endmenu
+config S3C2410_CLOCK
+ bool
+ help
+ Clock code for the S3C2410, and similar processors
+
+config S3C2410_PM
+ bool
+ help
+ Power Management code common to S3C2410 and better
+
+config CPU_S3C2410_DMA
+ bool
+ depends on S3C2410_DMA && (CPU_S3C2410 || CPU_S3C2442)
+ default y if CPU_S3C2410 || CPU_S3C2442
+ help
+ DMA device selection for S3C2410 and compatible CPUs
+
config CPU_S3C2410
bool
depends on ARCH_S3C2410
+ select S3C2410_CLOCK
+ select S3C2410_PM if PM
help
Support for S3C2410 and S3C2410A family from the S3C24XX line
of Samsung Mobile CPUs.
+# internal node to signify if we are only dealing with an S3C2412
+
+config CPU_S3C2412_ONLY
+ bool
+ depends on ARCH_S3C2410 && !CPU_S3C2400 && !CPU_S3C2410 && \
+ !CPU_S3C2440 && !CPU_S3C2442 && CPU_S3C2412
+ default y if CPU_S3C2412
+
+config S3C2412_PM
+ bool
+ help
+ Internal config node to apply S3C2412 power management
+
+config CPU_S3C2412
+ bool
+ depends on ARCH_S3C2410
+ select S3C2412_PM if PM
+ help
+ Support for the S3C2412 and S3C2413 SoCs from the S3C24XX line
+
+config CPU_S3C244X
+ bool
+ depends on ARCH_S3C2410 && (CPU_S3C2440 || CPU_S3C2442)
+ help
+ Support for S3C2440 and S3C2442 Samsung Mobile CPU based systems.
+
config CPU_S3C2440
bool
depends on ARCH_S3C2410
+ select S3C2410_CLOCK
+ select S3C2410_PM if PM
+ select CPU_S3C244X
help
Support for S3C2440 Samsung Mobile CPU based systems.
+config CPU_S3C2442
+ bool
+ depends on ARCH_S3C2420
+ select S3C2410_CLOCK
+ select S3C2410_PM if PM
+ select CPU_S3C244X
+ help
+ Support for S3C2442 Samsung Mobile CPU based systems.
+
comment "S3C2410 Boot"
config S3C2410_BOOT_WATCHDOG
system resets depends on the value of PCLK. The timeout on an
200MHz s3c2410 should be about 30 seconds.
+config S3C2410_BOOT_ERROR_RESET
+ bool "S3C2410 Reboot on decompression error"
+ depends on ARCH_S3C2410
+ help
+ Say y here to use the watchdog to reset the system if the
+ kernel decompressor detects an error during decompression.
+
+
comment "S3C2410 Setup"
config S3C2410_DMA
depends on ARCH_S3C2410 && PM
help
Say Y here if you want verbose debugging from the PM Suspend and
- Resume code. See `Documentation/arm/Samsing-S3C24XX/Suspend.txt`
+ Resume code. See <file:Documentation/arm/Samsung-S3C24XX/Suspend.txt>
for more information.
config S3C2410_PM_CHECK
the CRC data block will take more memory, but wil identify any
faults with better precision.
+config PM_SIMTEC
+ bool
+ help
+ Common power management code for systems that are
+ compatible with the Simtec style of power management
+
config S3C2410_LOWLEVEL_UART_PORT
int "S3C2410 UART to use for low-level messages"
default 0
git://git.onelab.eu / linux-2.6.git / blobdiff