/* linux/arch/arm/mach-s3c2410/clock.c
*
- * Copyright (c) 2004 Simtec Electronics
- * Ben Dooks <ben@simtec.co.uk>
+ * Copyright (c) 2004-2005 Simtec Electronics
+ * Ben Dooks <ben@simtec.co.uk>
*
- * S3C2410 Clock control support
+ * S3C24XX Core clock control support
*
* Based on, and code from linux/arch/arm/mach-versatile/clock.c
**
#include <linux/list.h>
#include <linux/errno.h>
#include <linux/err.h>
-
+#include <linux/platform_device.h>
+#include <linux/sysdev.h>
#include <linux/interrupt.h>
#include <linux/ioport.h>
+#include <linux/clk.h>
+#include <linux/mutex.h>
+#include <linux/delay.h>
#include <asm/hardware.h>
-#include <asm/atomic.h>
#include <asm/irq.h>
#include <asm/io.h>
-#include <asm/hardware/clock.h>
#include <asm/arch/regs-clock.h>
+#include <asm/arch/regs-gpio.h>
#include "clock.h"
+#include "cpu.h"
+/* clock information */
static LIST_HEAD(clocks);
-static DECLARE_MUTEX(clocks_sem);
+DEFINE_MUTEX(clocks_mutex);
-/* old functions */
+/* enable and disable calls for use with the clk struct */
-void s3c2410_clk_enable(unsigned int clocks, unsigned int enable)
+static int clk_null_enable(struct clk *clk, int enable)
{
- unsigned long clkcon;
- unsigned long flags;
-
- local_irq_save(flags);
-
- clkcon = __raw_readl(S3C2410_CLKCON);
- clkcon &= ~clocks;
-
- if (enable)
- clkcon |= clocks;
-
- __raw_writel(clkcon, S3C2410_CLKCON);
-
- local_irq_restore(flags);
+ return 0;
}
-
/* Clock API calls */
struct clk *clk_get(struct device *dev, const char *id)
{
struct clk *p;
struct clk *clk = ERR_PTR(-ENOENT);
+ int idno;
+
+ if (dev == NULL || dev->bus != &platform_bus_type)
+ idno = -1;
+ else
+ idno = to_platform_device(dev)->id;
+
+ mutex_lock(&clocks_mutex);
- down(&clocks_sem);
list_for_each_entry(p, &clocks, list) {
- if (strcmp(id, p->name) == 0 &&
+ if (p->id == idno &&
+ strcmp(id, p->name) == 0 &&
try_module_get(p->owner)) {
clk = p;
break;
}
}
- up(&clocks_sem);
+ /* check for the case where a device was supplied, but the
+ * clock that was being searched for is not device specific */
+
+ if (IS_ERR(clk)) {
+ list_for_each_entry(p, &clocks, list) {
+ if (p->id == -1 && strcmp(id, p->name) == 0 &&
+ try_module_get(p->owner)) {
+ clk = p;
+ break;
+ }
+ }
+ }
+
+ mutex_unlock(&clocks_mutex);
return clk;
}
int clk_enable(struct clk *clk)
{
- if (clk->ctrlbit != 0)
- s3c2410_clk_enable(clk->ctrlbit, 1);
+ if (IS_ERR(clk) || clk == NULL)
+ return -EINVAL;
+
+ clk_enable(clk->parent);
+
+ mutex_lock(&clocks_mutex);
+
+ if ((clk->usage++) == 0)
+ (clk->enable)(clk, 1);
+ mutex_unlock(&clocks_mutex);
return 0;
}
void clk_disable(struct clk *clk)
{
- s3c2410_clk_enable(clk->ctrlbit, 0);
-}
-
+ if (IS_ERR(clk) || clk == NULL)
+ return;
-int clk_use(struct clk *clk)
-{
- atomic_inc(&clk->used);
- return 0;
-}
+ mutex_lock(&clocks_mutex);
+ if ((--clk->usage) == 0)
+ (clk->enable)(clk, 0);
-void clk_unuse(struct clk *clk)
-{
- atomic_dec(&clk->used);
+ mutex_unlock(&clocks_mutex);
+ clk_disable(clk->parent);
}
+
unsigned long clk_get_rate(struct clk *clk)
{
+ if (IS_ERR(clk))
+ return 0;
+
+ if (clk->rate != 0)
+ return clk->rate;
+
+ if (clk->get_rate != NULL)
+ return (clk->get_rate)(clk);
+
if (clk->parent != NULL)
- return clk->parent->rate;
+ return clk_get_rate(clk->parent);
return clk->rate;
}
long clk_round_rate(struct clk *clk, unsigned long rate)
{
+ if (!IS_ERR(clk) && clk->round_rate)
+ return (clk->round_rate)(clk, rate);
+
return rate;
}
int clk_set_rate(struct clk *clk, unsigned long rate)
{
- return -EINVAL;
+ int ret;
+
+ if (IS_ERR(clk))
+ return -EINVAL;
+
+ mutex_lock(&clocks_mutex);
+ ret = (clk->set_rate)(clk, rate);
+ mutex_unlock(&clocks_mutex);
+
+ return ret;
}
struct clk *clk_get_parent(struct clk *clk)
return clk->parent;
}
+int clk_set_parent(struct clk *clk, struct clk *parent)
+{
+ int ret = 0;
+
+ if (IS_ERR(clk))
+ return -EINVAL;
+
+ mutex_lock(&clocks_mutex);
+
+ if (clk->set_parent)
+ ret = (clk->set_parent)(clk, parent);
+
+ mutex_unlock(&clocks_mutex);
+
+ return ret;
+}
+
EXPORT_SYMBOL(clk_get);
EXPORT_SYMBOL(clk_put);
EXPORT_SYMBOL(clk_enable);
EXPORT_SYMBOL(clk_disable);
-EXPORT_SYMBOL(clk_use);
-EXPORT_SYMBOL(clk_unuse);
EXPORT_SYMBOL(clk_get_rate);
EXPORT_SYMBOL(clk_round_rate);
EXPORT_SYMBOL(clk_set_rate);
EXPORT_SYMBOL(clk_get_parent);
+EXPORT_SYMBOL(clk_set_parent);
/* base clocks */
-static struct clk clk_f = {
- .name = "fclk",
- .rate = 0,
- .parent = NULL,
- .ctrlbit = 0
+struct clk clk_xtal = {
+ .name = "xtal",
+ .id = -1,
+ .rate = 0,
+ .parent = NULL,
+ .ctrlbit = 0,
+};
+
+struct clk clk_mpll = {
+ .name = "mpll",
+ .id = -1,
+};
+
+struct clk clk_upll = {
+ .name = "upll",
+ .id = -1,
+ .parent = NULL,
+ .ctrlbit = 0,
+};
+
+struct clk clk_f = {
+ .name = "fclk",
+ .id = -1,
+ .rate = 0,
+ .parent = &clk_mpll,
+ .ctrlbit = 0,
+};
+
+struct clk clk_h = {
+ .name = "hclk",
+ .id = -1,
+ .rate = 0,
+ .parent = NULL,
+ .ctrlbit = 0,
};
-static struct clk clk_h = {
- .name = "hclk",
- .rate = 0,
- .parent = NULL,
- .ctrlbit = 0
+struct clk clk_p = {
+ .name = "pclk",
+ .id = -1,
+ .rate = 0,
+ .parent = NULL,
+ .ctrlbit = 0,
};
-static struct clk clk_p = {
- .name = "pclk",
- .rate = 0,
- .parent = NULL,
- .ctrlbit = 0
+struct clk clk_usb_bus = {
+ .name = "usb-bus",
+ .id = -1,
+ .rate = 0,
+ .parent = &clk_upll,
};
-/* clock definitions */
-
-static struct clk init_clocks[] = {
- { .name = "nand",
- .parent = &clk_h,
- .ctrlbit = S3C2410_CLKCON_NAND
- },
- { .name = "lcd",
- .parent = &clk_h,
- .ctrlbit = S3C2410_CLKCON_LCDC
- },
- { .name = "usb-host",
- .parent = &clk_h,
- .ctrlbit = S3C2410_CLKCON_USBH
- },
- { .name = "usb-device",
- .parent = &clk_h,
- .ctrlbit = S3C2410_CLKCON_USBD
- },
- { .name = "timers",
- .parent = &clk_p,
- .ctrlbit = S3C2410_CLKCON_PWMT
- },
- { .name = "sdi",
- .parent = &clk_p,
- .ctrlbit = S3C2410_CLKCON_SDI
- },
- { .name = "uart0",
- .parent = &clk_p,
- .ctrlbit = S3C2410_CLKCON_UART0
- },
- { .name = "uart1",
- .parent = &clk_p,
- .ctrlbit = S3C2410_CLKCON_UART1
- },
- { .name = "uart2",
- .parent = &clk_p,
- .ctrlbit = S3C2410_CLKCON_UART2
- },
- { .name = "gpio",
- .parent = &clk_p,
- .ctrlbit = S3C2410_CLKCON_GPIO
- },
- { .name = "rtc",
- .parent = &clk_p,
- .ctrlbit = S3C2410_CLKCON_RTC
- },
- { .name = "adc",
- .parent = &clk_p,
- .ctrlbit = S3C2410_CLKCON_ADC
- },
- { .name = "i2c",
- .parent = &clk_p,
- .ctrlbit = S3C2410_CLKCON_IIC
- },
- { .name = "iis",
- .parent = &clk_p,
- .ctrlbit = S3C2410_CLKCON_IIS
- },
- { .name = "spi",
- .parent = &clk_p,
- .ctrlbit = S3C2410_CLKCON_SPI
- },
- { .name = "watchdog",
- .parent = &clk_p,
- .ctrlbit = 0
+/* clocks that could be registered by external code */
+
+static int s3c24xx_dclk_enable(struct clk *clk, int enable)
+{
+ unsigned long dclkcon = __raw_readl(S3C24XX_DCLKCON);
+
+ if (enable)
+ dclkcon |= clk->ctrlbit;
+ else
+ dclkcon &= ~clk->ctrlbit;
+
+ __raw_writel(dclkcon, S3C24XX_DCLKCON);
+
+ return 0;
+}
+
+static int s3c24xx_dclk_setparent(struct clk *clk, struct clk *parent)
+{
+ unsigned long dclkcon;
+ unsigned int uclk;
+
+ if (parent == &clk_upll)
+ uclk = 1;
+ else if (parent == &clk_p)
+ uclk = 0;
+ else
+ return -EINVAL;
+
+ clk->parent = parent;
+
+ dclkcon = __raw_readl(S3C24XX_DCLKCON);
+
+ if (clk->ctrlbit == S3C2410_DCLKCON_DCLK0EN) {
+ if (uclk)
+ dclkcon |= S3C2410_DCLKCON_DCLK0_UCLK;
+ else
+ dclkcon &= ~S3C2410_DCLKCON_DCLK0_UCLK;
+ } else {
+ if (uclk)
+ dclkcon |= S3C2410_DCLKCON_DCLK1_UCLK;
+ else
+ dclkcon &= ~S3C2410_DCLKCON_DCLK1_UCLK;
}
+
+ __raw_writel(dclkcon, S3C24XX_DCLKCON);
+
+ return 0;
+}
+
+
+static int s3c24xx_clkout_setparent(struct clk *clk, struct clk *parent)
+{
+ unsigned long mask;
+ unsigned long source;
+
+ /* calculate the MISCCR setting for the clock */
+
+ if (parent == &clk_xtal)
+ source = S3C2410_MISCCR_CLK0_MPLL;
+ else if (parent == &clk_upll)
+ source = S3C2410_MISCCR_CLK0_UPLL;
+ else if (parent == &clk_f)
+ source = S3C2410_MISCCR_CLK0_FCLK;
+ else if (parent == &clk_h)
+ source = S3C2410_MISCCR_CLK0_HCLK;
+ else if (parent == &clk_p)
+ source = S3C2410_MISCCR_CLK0_PCLK;
+ else if (clk == &s3c24xx_clkout0 && parent == &s3c24xx_dclk0)
+ source = S3C2410_MISCCR_CLK0_DCLK0;
+ else if (clk == &s3c24xx_clkout1 && parent == &s3c24xx_dclk1)
+ source = S3C2410_MISCCR_CLK0_DCLK0;
+ else
+ return -EINVAL;
+
+ clk->parent = parent;
+
+ if (clk == &s3c24xx_dclk0)
+ mask = S3C2410_MISCCR_CLK0_MASK;
+ else {
+ source <<= 4;
+ mask = S3C2410_MISCCR_CLK1_MASK;
+ }
+
+ s3c2410_modify_misccr(mask, source);
+ return 0;
+}
+
+/* external clock definitions */
+
+struct clk s3c24xx_dclk0 = {
+ .name = "dclk0",
+ .id = -1,
+ .ctrlbit = S3C2410_DCLKCON_DCLK0EN,
+ .enable = s3c24xx_dclk_enable,
+ .set_parent = s3c24xx_dclk_setparent,
+};
+
+struct clk s3c24xx_dclk1 = {
+ .name = "dclk1",
+ .id = -1,
+ .ctrlbit = S3C2410_DCLKCON_DCLK0EN,
+ .enable = s3c24xx_dclk_enable,
+ .set_parent = s3c24xx_dclk_setparent,
+};
+
+struct clk s3c24xx_clkout0 = {
+ .name = "clkout0",
+ .id = -1,
+ .set_parent = s3c24xx_clkout_setparent,
+};
+
+struct clk s3c24xx_clkout1 = {
+ .name = "clkout1",
+ .id = -1,
+ .set_parent = s3c24xx_clkout_setparent,
+};
+
+struct clk s3c24xx_uclk = {
+ .name = "uclk",
+ .id = -1,
};
/* initialise the clock system */
-int s3c2410_register_clock(struct clk *clk)
+int s3c24xx_register_clock(struct clk *clk)
{
clk->owner = THIS_MODULE;
- atomic_set(&clk->used, 0);
+
+ if (clk->enable == NULL)
+ clk->enable = clk_null_enable;
/* add to the list of available clocks */
- down(&clocks_sem);
+ mutex_lock(&clocks_mutex);
list_add(&clk->list, &clocks);
- up(&clocks_sem);
+ mutex_unlock(&clocks_mutex);
return 0;
}
/* initalise all the clocks */
-static int __init s3c2410_init_clocks(void)
+int __init s3c24xx_setup_clocks(unsigned long xtal,
+ unsigned long fclk,
+ unsigned long hclk,
+ unsigned long pclk)
{
- struct clk *clkp = init_clocks;
- int ptr;
- int ret;
-
- printk(KERN_INFO "S3C2410 Clock control, (c) 2004 Simtec Electronics\n");
+ printk(KERN_INFO "S3C24XX Clocks, (c) 2004 Simtec Electronics\n");
/* initialise the main system clocks */
- clk_h.rate = s3c2410_hclk;
- clk_p.rate = s3c2410_pclk;
- clk_f.rate = s3c2410_fclk;
+ clk_xtal.rate = xtal;
+ clk_upll.rate = s3c2410_get_pll(__raw_readl(S3C2410_UPLLCON), xtal);
+
+ clk_mpll.rate = fclk;
+ clk_h.rate = hclk;
+ clk_p.rate = pclk;
+ clk_f.rate = fclk;
- /* set the enabled clocks to a minimal (known) state */
- __raw_writel(S3C2410_CLKCON_PWMT | S3C2410_CLKCON_UART0 | S3C2410_CLKCON_UART1 | S3C2410_CLKCON_UART2 | S3C2410_CLKCON_GPIO | S3C2410_CLKCON_RTC, S3C2410_CLKCON);
+ /* assume uart clocks are correctly setup */
/* register our clocks */
- if (s3c2410_register_clock(&clk_f) < 0)
+ if (s3c24xx_register_clock(&clk_xtal) < 0)
+ printk(KERN_ERR "failed to register master xtal\n");
+
+ if (s3c24xx_register_clock(&clk_mpll) < 0)
+ printk(KERN_ERR "failed to register mpll clock\n");
+
+ if (s3c24xx_register_clock(&clk_upll) < 0)
+ printk(KERN_ERR "failed to register upll clock\n");
+
+ if (s3c24xx_register_clock(&clk_f) < 0)
printk(KERN_ERR "failed to register cpu fclk\n");
- if (s3c2410_register_clock(&clk_h) < 0)
+ if (s3c24xx_register_clock(&clk_h) < 0)
printk(KERN_ERR "failed to register cpu hclk\n");
- if (s3c2410_register_clock(&clk_p) < 0)
+ if (s3c24xx_register_clock(&clk_p) < 0)
printk(KERN_ERR "failed to register cpu pclk\n");
- for (ptr = 0; ptr < ARRAY_SIZE(init_clocks); ptr++, clkp++) {
- ret = s3c2410_register_clock(clkp);
- if (ret < 0) {
- printk(KERN_ERR "Failed to register clock %s (%d)\n",
- clkp->name, ret);
- }
- }
-
return 0;
}
-
-arch_initcall(s3c2410_init_clocks);
-
git://git.onelab.eu / linux-2.6.git / blobdiff