+if ARCH_SA1100
menu "SA11x0 Implementations"
config SA1100_ASSABET
bool "Assabet"
- depends on ARCH_SA1100
help
Say Y here if you are using the Intel(R) StrongARM(R) SA-1110
Microprocessor Development Board (also known as the Assabet).
config ASSABET_NEPONSET
bool "Include support for Neponset"
depends on SA1100_ASSABET
+ select SA1111
help
Say Y here if you are using the Intel(R) StrongARM(R) SA-1110
Microprocessor Development Board (Assabet) with the SA-1111
Development Board (Nepon).
-config SA1100_ADSBITSY
- bool "ADS Bitsy"
- depends on ARCH_SA1100
- help
- Say Y here if you are using Applied Data Systems Intel(R)
- StrongARM(R) 1110 based Bitsy, 3 x 5 inches in size, Compaq - IPAQ -
- like platform. See
- <http://www.applieddata.net/products_bitsySpec.asp> for more
- information.
-
-config SA1100_BRUTUS
- bool "Brutus"
- depends on ARCH_SA1100
- help
- Say Y here if you are using the Intel(R) StrongARM(R) SA-1100
- Microprocessor Development Board (also known as the Brutus).
-
config SA1100_CERF
bool "CerfBoard"
- depends on ARCH_SA1100
help
The Intrinsyc CerfBoard is based on the StrongARM 1110 (Discontinued).
More information is available at:
endchoice
+config SA1100_COLLIE
+ bool "Sharp Zaurus SL5500"
+ select SHARP_LOCOMO
+ select SHARP_SCOOP
+ select SHARP_PARAM
+ help
+ Say Y here to support the Sharp Zaurus SL5500 PDAs.
+
config SA1100_H3100
bool "Compaq iPAQ H3100"
- depends on ARCH_SA1100
help
Say Y here if you intend to run this kernel on the Compaq iPAQ
H3100 handheld computer. Information about this machine and the
config SA1100_H3600
bool "Compaq iPAQ H3600/H3700"
- depends on ARCH_SA1100
help
Say Y here if you intend to run this kernel on the Compaq iPAQ
H3600 handheld computer. Information about this machine and the
config SA1100_H3800
bool "Compaq iPAQ H3800"
- depends on ARCH_SA1100
help
Say Y here if you intend to run this kernel on the Compaq iPAQ H3800
series handheld computer. Information about this machine and the
depends on SA1100_H3100 || SA1100_H3600 || SA1100_H3800
default y
-#dep_bool ' Consus' CONFIG_SA1100_CONSUS $CONFIG_ARCH_SA1100
-#dep_bool ' Empeg' CONFIG_SA1100_EMPEG $CONFIG_ARCH_SA1100
-config SA1100_EXTENEX1
- bool "Extenex HandHeld Theater (Squashtail)"
- depends on ARCH_SA1100
-
-config SA1100_EXTENEX1_16MB
- bool "Support 16 MB of DRAM (not just 8)"
- depends on SA1100_EXTENEX1
-
-config SA1100_FLEXANET
- bool "FlexaNet"
- depends on ARCH_SA1100
- help
- Say Y here if you intend to run this kernel on the FlexaNet
- handheld instruments. Information about this machine can be
- found at: <http://www.flexanet.com/>.
-
-config SA1100_FREEBIRD
- bool "FreeBird-v1.1"
- depends on ARCH_SA1100
- help
- Support the FreeBird board used in Coventive embedded products. See
- Documentation/arm/SA1100/Freebird for more.
-
-config SA1100_GRAPHICSCLIENT
- bool "GraphicsClient Plus"
- depends on ARCH_SA1100
- help
- Say Y here if you are using an Applied Data Systems Intel(R)
- StrongARM(R) SA-1100 based Graphics Client SBC. See
- <http://www.flatpanels.com/> for information on this system.
-
-config SA1100_GRAPHICSMASTER
- bool "GraphicsMaster"
- depends on ARCH_SA1100
- help
- Say Y here if you are using an Applied Data Systems Intel(R)
- StrongARM(R) SA-1100 based Graphics Master SBC with SA-1111
- StrongARM companion chip. See
- <http://www.applieddata.net/products_masterSpec.asp> for information
- on this system.
-
config SA1100_BADGE4
bool "HP Labs BadgePAD 4"
- depends on ARCH_SA1100
+ select SA1111
help
Say Y here if you want to build a kernel for the HP Laboratories
BadgePAD 4.
config SA1100_JORNADA720
bool "HP Jornada 720"
- depends on ARCH_SA1100
+ select SA1111
help
Say Y here if you want to build a kernel for the HP Jornada 720
handheld computer. See <http://www.hp.com/jornada/products/720>
config SA1100_HACKKIT
bool "HackKit Core CPU Board"
- depends on ARCH_SA1100
help
Say Y here to support the HackKit Core CPU Board
<http://hackkit.eletztrick.de>;
-config SA1100_HUW_WEBPANEL
- bool "HuW WebPanel"
- depends on ARCH_SA1100
- help
- Say Y here to support the HuW Webpanel produced by Hoeft & Wessel
- AG. English-language website is at
- <http://www.hoeft-wessel.de/en.htm>; credits and build instructions
- at Documentation/arm/SA1100/HUW_WEBPANEL.
-
-config SA1100_ITSY
- bool "Itsy"
- depends on ARCH_SA1100
- help
- Say Y here if you are using the Compaq Itsy experimental pocket
- computer. See <http://research.compaq.com/wrl/projects/itsy/> for
- more information.
-
config SA1100_LART
bool "LART"
- depends on ARCH_SA1100
help
Say Y here if you are using the Linux Advanced Radio Terminal
- (also known as the LART). See <http://www.lart.tudelft.nl/> for
+ (also known as the LART). See <http://www.lartmaker.nl/> for
information on the LART.
-config SA1100_NANOENGINE
- bool "nanoEngine"
- depends on ARCH_SA1100
- help
- The nanoEngine is a StrongARM 1110-based single board computer
- from Bright Star Engineering. More information is available at:
- <http://www.brightstareng.com/arm/nanoeng.htm>.
-
- Say Y if configuring for a nanoEngine.
- Say N otherwise.
-
-config SA1100_OMNIMETER
- bool "OmniMeter"
- depends on ARCH_SA1100
- help
- Say Y here if you are using the inhand electronics OmniMeter. See
- <http://www.inhandelectronics.com/omnimeter.asp> for details.
-
-config SA1100_PANGOLIN
- bool "Pangolin"
- depends on ARCH_SA1100
- help
- Pangolin is a StrongARM 1110-based evaluation platform produced
- by Dialogue Technology. It has EISA slots for ease of configuration
- with SDRAM/Flash memory card, USB/Serial/Audio card, Compact Flash
- card, and TFT-LCD card.
-
- Say Y if configuring for a Pangolin.
- Say N otherwise.
-
config SA1100_PLEB
bool "PLEB"
- depends on ARCH_SA1100
help
- Say Y here if you are using a Portable Linux Embedded Board
- (also known as PLEB). See <http://www.cse.unsw.edu.au/~pleb/>
+ Say Y here if you are using version 1 of the Portable Linux
+ Embedded Board (also known as PLEB).
+ See <http://www.disy.cse.unsw.edu.au/Hardware/PLEB/>
for more information.
-config SA1100_PT_SYSTEM3
- bool "PT System 3"
- depends on ARCH_SA1100
- help
- Say Y here if you intend to build a kernel suitable to run on
- a Pruftechnik Digital Board. For more information see
- <http://www.pruftechnik.com/>
-
config SA1100_SHANNON
bool "Shannon"
- depends on ARCH_SA1100
help
The Shannon (also known as a Tuxscreen, and also as a IS2630) was a
limited edition webphone produced by Philips. The Shannon is a SA1100
platform with a 640x480 LCD, touchscreen, CIR keyboard, PCMCIA slots,
and a telco interface.
-config SA1100_SHERMAN
- bool "Sherman"
- depends on ARCH_SA1100
- help
- Say Y here to support the Blazie Engineering `Sherman' StrongARM
- 1110-based SBC, used primarily in assistance products for the
- visually impaired. The company is now Freedom Scientific, with
- a website at <http://www.freedomscientific.com/>. The Sherman
- product, however, appears to have been discontinued.
-
config SA1100_SIMPAD
bool "Simpad"
- depends on ARCH_SA1100
help
The SIEMENS webpad SIMpad is based on the StrongARM 1110. There
are two different versions CL4 and SL4. CL4 has 32MB RAM and 16MB
like CL4 in additional it has a PCMCIA-Slot. For more information
visit <http://www.my-siemens.com/> or <http://www.siemens.ch/>.
-config SA1100_PFS168
- bool "Tulsa"
- depends on ARCH_SA1100
- help
- The Radisys Corp. PFS-168 (aka Tulsa) is an IntelĀ® StrongArmĀ® SA-1110 based
- computer which includes the SA-1111 Microprocessor Companion Chip and other
- custom I/O designed to add connectivity and multimedia features for vending
- and business machine applications. Say Y here if you require support for
- this target.
-
-config SA1100_VICTOR
- bool "Victor"
- depends on ARCH_SA1100
- help
- Say Y here if you are using a Visu Aide Intel(R) StrongARM(R)
- SA-1100 based Victor Digital Talking Book Reader. See
- <http://www.visuaide.com/products.html> for information on
- this system.
-
-config SA1100_XP860
- bool "XP860"
- depends on ARCH_SA1100
- help
- :: Config help missing ::
- :: 06 August 2002 ::
-
-config SA1100_YOPY
- bool "Yopy"
- depends on ARCH_SA1100
- help
- Say Y here to support the Yopy PDA. Product information at
- <http://www.yopy.com/>. See Documentation/arm/SA1100/Yopy
- for more.
-
-config SA1100_STORK
- bool "Stork"
- depends on ARCH_SA1100
- help
- Say Y here if you intend to run this kernel on the Stork
- handheld computer.
-
-#config SA1100_TRIZEPS
-# bool "Trizeps"
-# depends on ARCH_SA1100
-# help
-# :: write me ::
-
-#config TRIZEPS_MFTB2
-# bool "MFTB2"
-# depends on SA1100_TRIZEPS
-# help
-# :: write me ::
-
config SA1100_SSP
tristate "Generic PIO SSP"
- depends on ARCH_SA1100
help
Say Y here to enable support for the generic PIO SSP driver.
This isn't for audio support, but for attached sensors and
other devices, eg for BadgePAD 4 sensor support, or Jornada
720 touchscreen support.
-config SA1100_USB
- tristate "SA1100 USB function support"
- depends on ARCH_SA1100
-
-config SA1100_USB_NETLINK
- tristate "Support for SA11x0 USB network link function"
- depends on SA1100_USB
-
-config SA1100_USB_CHAR
- tristate "Support for SA11x0 USB character device emulation"
- depends on SA1100_USB
-
config H3600_SLEEVE
tristate "Compaq iPAQ Handheld sleeve support"
- depends on SA1100_H3600
+ depends on SA1100_H3100 || SA1100_H3600
help
Choose this option to enable support for extension packs (sleeves)
for the Compaq iPAQ H3XXX series of handheld computers. This option
endmenu
+endif