#include <asm/irq.h>
#include <asm/setup.h>
#include <asm/page.h>
+#include <asm/pgtable-hwdef.h>
#include <asm/pgtable.h>
#include <asm/tlbflush.h>
#include <asm/mach/map.h>
#include <asm/mach/serial_sa1100.h>
#include <asm/arch/assabet.h>
+#include <asm/arch/mcp.h>
#include "generic.h"
.set_speed = assabet_irda_set_speed,
};
+static struct mcp_plat_data assabet_mcp_data = {
+ .mccr0 = MCCR0_ADM,
+ .sclk_rate = 11981000,
+};
+
static void __init assabet_init(void)
{
/*
sa11x0_set_flash_data(&assabet_flash_data, assabet_flash_resources,
ARRAY_SIZE(assabet_flash_resources));
sa11x0_set_irda_data(&assabet_irda_data);
+ sa11x0_set_mcp_data(&assabet_mcp_data);
}
/*
GPDR |= 0x3fc; /* Configure GPIO 9:2 as outputs */
GPSR = 0x3fc; /* Write 0xFF to GPIO 9:2 */
GPDR &= ~(0x3fc); /* Configure GPIO 9:2 as inputs */
- for(i = 100; i--; scr = GPLR); /* Read GPIO 9:2 */
+ for(i = 100; i--; ) /* Read GPIO 9:2 */
+ scr = GPLR;
GPDR |= 0x3fc; /* restore correct pin direction */
scr &= 0x3fc; /* save as system configuration byte. */
SCR_value = scr;
};
static struct map_desc assabet_io_desc[] __initdata = {
- /* virtual physical length type */
- { 0xf1000000, 0x12000000, 0x00100000, MT_DEVICE }, /* Board Control Register */
- { 0xf2800000, 0x4b800000, 0x00800000, MT_DEVICE } /* MQ200 */
+ { /* Board Control Register */
+ .virtual = 0xf1000000,
+ .pfn = __phys_to_pfn(0x12000000),
+ .length = 0x00100000,
+ .type = MT_DEVICE
+ }, { /* MQ200 */
+ .virtual = 0xf2800000,
+ .pfn = __phys_to_pfn(0x4b800000),
+ .length = 0x00800000,
+ .type = MT_DEVICE
+ }
};
static void __init assabet_map_io(void)
MACHINE_START(ASSABET, "Intel-Assabet")
- BOOT_MEM(0xc0000000, 0x80000000, 0xf8000000)
- BOOT_PARAMS(0xc0000100)
- FIXUP(fixup_assabet)
- MAPIO(assabet_map_io)
- INITIRQ(sa1100_init_irq)
+ .phys_io = 0x80000000,
+ .io_pg_offst = ((0xf8000000) >> 18) & 0xfffc,
+ .boot_params = 0xc0000100,
+ .fixup = fixup_assabet,
+ .map_io = assabet_map_io,
+ .init_irq = sa1100_init_irq,
.timer = &sa1100_timer,
.init_machine = assabet_init,
MACHINE_END