* published by the Free Software Foundation.
*
* ChangeLog:
- * 03-06-2004 John Lenz <jelenz@wisc.edu>
+ * 2006 Pavel Machek <pavel@suse.cz>
+ * 03-06-2004 John Lenz <lenz@cs.wisc.edu>
* 06-04-2002 Chris Larson <kergoth@digitalnemesis.net>
* 04-16-2001 Lineo Japan,Inc. ...
*/
#include <linux/kernel.h>
#include <linux/tty.h>
#include <linux/delay.h>
-#include <linux/device.h>
+#include <linux/platform_device.h>
#include <linux/mtd/mtd.h>
#include <linux/mtd/partitions.h>
#include <linux/timer.h>
#include <asm/hardware/scoop.h>
#include <asm/mach/sharpsl_param.h>
#include <asm/hardware/locomo.h>
+#include <asm/arch/mcp.h>
#include "generic.h"
.resource = collie_scoop_resources,
};
+static struct scoop_pcmcia_dev collie_pcmcia_scoop[] = {
+{
+ .dev = &colliescoop_device.dev,
+ .irq = COLLIE_IRQ_GPIO_CF_IRQ,
+ .cd_irq = COLLIE_IRQ_GPIO_CF_CD,
+ .cd_irq_str = "PCMCIA0 CD",
+},
+};
+
+static struct scoop_pcmcia_config collie_pcmcia_config = {
+ .devs = &collie_pcmcia_scoop[0],
+ .num_devs = 1,
+};
+
+
+static struct mcp_plat_data collie_mcp_data = {
+ .mccr0 = MCCR0_ADM,
+ .sclk_rate = 11981000,
+};
+
+#ifdef CONFIG_SHARP_LOCOMO
+/*
+ * low-level UART features.
+ */
+static struct locomo_dev *uart_dev = NULL;
+
+static void collie_uart_set_mctrl(struct uart_port *port, u_int mctrl)
+{
+ if (!uart_dev) return;
+
+ if (mctrl & TIOCM_RTS)
+ locomo_gpio_write(uart_dev, LOCOMO_GPIO_RTS, 0);
+ else
+ locomo_gpio_write(uart_dev, LOCOMO_GPIO_RTS, 1);
+
+ if (mctrl & TIOCM_DTR)
+ locomo_gpio_write(uart_dev, LOCOMO_GPIO_DTR, 0);
+ else
+ locomo_gpio_write(uart_dev, LOCOMO_GPIO_DTR, 1);
+}
+
+static u_int collie_uart_get_mctrl(struct uart_port *port)
+{
+ int ret = TIOCM_CD;
+ unsigned int r;
+ if (!uart_dev) return ret;
+
+ r = locomo_gpio_read_output(uart_dev, LOCOMO_GPIO_CTS & LOCOMO_GPIO_DSR);
+ if (r & LOCOMO_GPIO_CTS)
+ ret |= TIOCM_CTS;
+ if (r & LOCOMO_GPIO_DSR)
+ ret |= TIOCM_DSR;
+
+ return ret;
+}
+
+static struct sa1100_port_fns collie_port_fns __initdata = {
+ .set_mctrl = collie_uart_set_mctrl,
+ .get_mctrl = collie_uart_get_mctrl,
+};
+
+static int collie_uart_probe(struct locomo_dev *dev)
+{
+ uart_dev = dev;
+ return 0;
+}
+
+static int collie_uart_remove(struct locomo_dev *dev)
+{
+ uart_dev = NULL;
+ return 0;
+}
+
+static struct locomo_driver collie_uart_driver = {
+ .drv = {
+ .name = "collie_uart",
+ },
+ .devid = LOCOMO_DEVID_UART,
+ .probe = collie_uart_probe,
+ .remove = collie_uart_remove,
+};
+
+static int __init collie_uart_init(void) {
+ return locomo_driver_register(&collie_uart_driver);
+}
+device_initcall(collie_uart_init);
+
+#endif
+
static struct resource locomo_resources[] = {
[0] = {
static void collie_set_vpp(int vpp)
{
- write_scoop_reg(SCOOP_GPCR, read_scoop_reg(SCOOP_GPCR) | COLLIE_SCP_VPEN);
- if (vpp) {
- write_scoop_reg(SCOOP_GPWR, read_scoop_reg(SCOOP_GPWR) | COLLIE_SCP_VPEN);
- } else {
- write_scoop_reg(SCOOP_GPWR, read_scoop_reg(SCOOP_GPWR) & ~COLLIE_SCP_VPEN);
- }
+ write_scoop_reg(&colliescoop_device.dev, SCOOP_GPCR, read_scoop_reg(&colliescoop_device.dev, SCOOP_GPCR) | COLLIE_SCP_VPEN);
+ if (vpp)
+ write_scoop_reg(&colliescoop_device.dev, SCOOP_GPWR, read_scoop_reg(&colliescoop_device.dev, SCOOP_GPWR) | COLLIE_SCP_VPEN);
+ else
+ write_scoop_reg(&colliescoop_device.dev, SCOOP_GPWR, read_scoop_reg(&colliescoop_device.dev, SCOOP_GPWR) & ~COLLIE_SCP_VPEN);
}
static struct flash_platform_data collie_flash_data = {
GPDR |= GPIO_32_768kHz;
TUCR = TUCR_32_768kHz;
+ platform_scoop_config = &collie_pcmcia_config;
+
ret = platform_add_devices(devices, ARRAY_SIZE(devices));
if (ret) {
printk(KERN_WARNING "collie: Unable to register LoCoMo device\n");
sa11x0_set_flash_data(&collie_flash_data, collie_flash_resources,
ARRAY_SIZE(collie_flash_resources));
+ sa11x0_set_mcp_data(&collie_mcp_data);
sharpsl_save_param();
}
static struct map_desc collie_io_desc[] __initdata = {
- /* virtual physical length type */
- {0xe8000000, 0x00000000, 0x02000000, MT_DEVICE}, /* 32M main flash (cs0) */
- {0xea000000, 0x08000000, 0x02000000, MT_DEVICE}, /* 32M boot flash (cs1) */
+ { /* 32M main flash (cs0) */
+ .virtual = 0xe8000000,
+ .pfn = __phys_to_pfn(0x00000000),
+ .length = 0x02000000,
+ .type = MT_DEVICE
+ }, { /* 32M boot flash (cs1) */
+ .virtual = 0xea000000,
+ .pfn = __phys_to_pfn(0x08000000),
+ .length = 0x02000000,
+ .type = MT_DEVICE
+ }
};
static void __init collie_map_io(void)
{
sa1100_map_io();
iotable_init(collie_io_desc, ARRAY_SIZE(collie_io_desc));
+
+#ifdef CONFIG_SHARP_LOCOMO
+ sa1100_register_uart_fns(&collie_port_fns);
+#endif
+ sa1100_register_uart(0, 3);
+ sa1100_register_uart(1, 1);
}
MACHINE_START(COLLIE, "Sharp-Collie")
- BOOT_MEM(0xc0000000, 0x80000000, 0xf8000000)
- MAPIO(collie_map_io)
- INITIRQ(sa1100_init_irq)
+ .phys_io = 0x80000000,
+ .io_pg_offst = ((0xf8000000) >> 18) & 0xfffc,
+ .map_io = collie_map_io,
+ .init_irq = sa1100_init_irq,
.timer = &sa1100_timer,
.init_machine = collie_init,
MACHINE_END