--- /dev/null
+/*
+ * linux/arch/arm/plat-omap/mux.c
+ *
+ * Utility to set the Omap MUX and PULL_DWN registers from a table in mux.h
+ *
+ * Copyright (C) 2003 - 2005 Nokia Corporation
+ *
+ * Written by Tony Lindgren <tony.lindgren@nokia.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
+ *
+ */
+#include <linux/config.h>
+#include <linux/module.h>
+#include <linux/init.h>
+#include <linux/kernel.h>
+#include <asm/system.h>
+#include <asm/io.h>
+#include <linux/spinlock.h>
+#include <asm/arch/mux.h>
+
+#ifdef CONFIG_OMAP_MUX
+
+#define OMAP24XX_L4_BASE 0x48000000
+#define OMAP24XX_PULL_ENA (1 << 3)
+#define OMAP24XX_PULL_UP (1 << 4)
+
+static struct pin_config * pin_table;
+static unsigned long pin_table_sz;
+
+extern struct pin_config * omap730_pins;
+extern struct pin_config * omap1xxx_pins;
+extern struct pin_config * omap24xx_pins;
+
+int __init omap_mux_register(struct pin_config * pins, unsigned long size)
+{
+ pin_table = pins;
+ pin_table_sz = size;
+
+ return 0;
+}
+
+/*
+ * Sets the Omap MUX and PULL_DWN registers based on the table
+ */
+int __init_or_module omap_cfg_reg(const unsigned long index)
+{
+ static DEFINE_SPINLOCK(mux_spin_lock);
+
+ unsigned long flags;
+ struct pin_config *cfg;
+ unsigned int reg_orig = 0, reg = 0, pu_pd_orig = 0, pu_pd = 0,
+ pull_orig = 0, pull = 0;
+ unsigned int mask, warn = 0;
+
+ if (!pin_table)
+ BUG();
+
+ if (index >= pin_table_sz) {
+ printk(KERN_ERR "Invalid pin mux index: %lu (%lu)\n",
+ index, pin_table_sz);
+ dump_stack();
+ return -ENODEV;
+ }
+
+ cfg = (struct pin_config *)&pin_table[index];
+ if (cpu_is_omap24xx()) {
+ u8 reg = 0;
+
+ reg |= cfg->mask & 0x7;
+ if (cfg->pull_val)
+ reg |= OMAP24XX_PULL_ENA;
+ if(cfg->pu_pd_val)
+ reg |= OMAP24XX_PULL_UP;
+#ifdef CONFIG_OMAP_MUX_DEBUG
+ printk("Muxing %s (0x%08x): 0x%02x -> 0x%02x\n",
+ cfg->name, OMAP24XX_L4_BASE + cfg->mux_reg,
+ omap_readb(OMAP24XX_L4_BASE + cfg->mux_reg), reg);
+#endif
+ omap_writeb(reg, OMAP24XX_L4_BASE + cfg->mux_reg);
+
+ return 0;
+ }
+
+ /* Check the mux register in question */
+ if (cfg->mux_reg) {
+ unsigned tmp1, tmp2;
+
+ spin_lock_irqsave(&mux_spin_lock, flags);
+ reg_orig = omap_readl(cfg->mux_reg);
+
+ /* The mux registers always seem to be 3 bits long */
+ mask = (0x7 << cfg->mask_offset);
+ tmp1 = reg_orig & mask;
+ reg = reg_orig & ~mask;
+
+ tmp2 = (cfg->mask << cfg->mask_offset);
+ reg |= tmp2;
+
+ if (tmp1 != tmp2)
+ warn = 1;
+
+ omap_writel(reg, cfg->mux_reg);
+ spin_unlock_irqrestore(&mux_spin_lock, flags);
+ }
+
+ /* Check for pull up or pull down selection on 1610 */
+ if (!cpu_is_omap1510()) {
+ if (cfg->pu_pd_reg && cfg->pull_val) {
+ spin_lock_irqsave(&mux_spin_lock, flags);
+ pu_pd_orig = omap_readl(cfg->pu_pd_reg);
+ mask = 1 << cfg->pull_bit;
+
+ if (cfg->pu_pd_val) {
+ if (!(pu_pd_orig & mask))
+ warn = 1;
+ /* Use pull up */
+ pu_pd = pu_pd_orig | mask;
+ } else {
+ if (pu_pd_orig & mask)
+ warn = 1;
+ /* Use pull down */
+ pu_pd = pu_pd_orig & ~mask;
+ }
+ omap_writel(pu_pd, cfg->pu_pd_reg);
+ spin_unlock_irqrestore(&mux_spin_lock, flags);
+ }
+ }
+
+ /* Check for an associated pull down register */
+ if (cfg->pull_reg) {
+ spin_lock_irqsave(&mux_spin_lock, flags);
+ pull_orig = omap_readl(cfg->pull_reg);
+ mask = 1 << cfg->pull_bit;
+
+ if (cfg->pull_val) {
+ if (pull_orig & mask)
+ warn = 1;
+ /* Low bit = pull enabled */
+ pull = pull_orig & ~mask;
+ } else {
+ if (!(pull_orig & mask))
+ warn = 1;
+ /* High bit = pull disabled */
+ pull = pull_orig | mask;
+ }
+
+ omap_writel(pull, cfg->pull_reg);
+ spin_unlock_irqrestore(&mux_spin_lock, flags);
+ }
+
+ if (warn) {
+#ifdef CONFIG_OMAP_MUX_WARNINGS
+ printk(KERN_WARNING "MUX: initialized %s\n", cfg->name);
+#endif
+ }
+
+#ifdef CONFIG_OMAP_MUX_DEBUG
+ if (cfg->debug || warn) {
+ printk("MUX: Setting register %s\n", cfg->name);
+ printk(" %s (0x%08x) = 0x%08x -> 0x%08x\n",
+ cfg->mux_reg_name, cfg->mux_reg, reg_orig, reg);
+
+ if (!cpu_is_omap1510()) {
+ if (cfg->pu_pd_reg && cfg->pull_val) {
+ printk(" %s (0x%08x) = 0x%08x -> 0x%08x\n",
+ cfg->pu_pd_name, cfg->pu_pd_reg,
+ pu_pd_orig, pu_pd);
+ }
+ }
+
+ if (cfg->pull_reg)
+ printk(" %s (0x%08x) = 0x%08x -> 0x%08x\n",
+ cfg->pull_name, cfg->pull_reg, pull_orig, pull);
+ }
+#endif
+
+#ifdef CONFIG_OMAP_MUX_ERRORS
+ return warn ? -ETXTBSY : 0;
+#else
+ return 0;
+#endif
+}
+EXPORT_SYMBOL(omap_cfg_reg);
+#else
+#define omap_mux_init() do {} while(0)
+#define omap_cfg_reg(x) do {} while(0)
+#endif /* CONFIG_OMAP_MUX */
git://git.onelab.eu / linux-2.6.git / blobdiff