bool
default y
-source "init/Kconfig"
+config GENERIC_IOMAP
+ bool
+ default y
+source "init/Kconfig"
menu "Processor type and features"
config X86_VOYAGER
bool "Voyager (NCR)"
help
- Voyager is a MCA based 32 way capable SMP architecture proprietary
- to NCR Corp. Machine classes 345x/35xx/4100/51xx are voyager based.
-
+ Voyager is an MCA-based 32-way capable SMP architecture proprietary
+ to NCR Corp. Machine classes 345x/35xx/4100/51xx are Voyager-based.
+
*** WARNING ***
-
+
If you do not specifically know you have a Voyager based machine,
- say N here otherwise the kernel you build will not be bootable.
+ say N here, otherwise the kernel you build will not be bootable.
config X86_NUMAQ
bool "NUMAQ (IBM/Sequent)"
select DISCONTIGMEM
select NUMA
help
- This option is used for getting Linux to run on a (IBM/Sequent) NUMA
+ This option is used for getting Linux to run on a (IBM/Sequent) NUMA
multiquad box. This changes the way that processors are bootstrapped,
and uses Clustered Logical APIC addressing mode instead of Flat Logical.
You will need a new lynxer.elf file to flash your firmware with - send
depends on SMP
help
Support for Unisys ES7000 systems. Say 'Y' here if this kernel is
- supposed to run on an IA32-based Unisys ES7000 system.
- Only choose this option if you have such a system, otherwise you
+ supposed to run on an IA32-based Unisys ES7000 system.
+ Only choose this option if you have such a system, otherwise you
should say N here.
endchoice
- "K6" for the AMD K6, K6-II and K6-III (aka K6-3D).
- "Athlon" for the AMD K7 family (Athlon/Duron/Thunderbird).
- "Crusoe" for the Transmeta Crusoe series.
+ - "Efficeon" for the Transmeta Efficeon series.
- "Winchip-C6" for original IDT Winchip.
- "Winchip-2" for IDT Winchip 2.
- "Winchip-2A" for IDT Winchips with 3dNow! capabilities.
bool "586/K5/5x86/6x86/6x86MX"
help
Select this for an 586 or 686 series processor such as the AMD K5,
- the Intel 5x86 or 6x86, or the Intel 6x86MX. This choice does not
+ the Cyrix 5x86, 6x86 and 6x86MX. This choice does not
assume the RDTSC (Read Time Stamp Counter) instruction.
config M586TSC
like a 586 with TSC, and sets some GCC optimization flags (like a
Pentium Pro with no alignment requirements).
+config MEFFICEON
+ bool "Efficeon"
+ help
+ Select this for a Transmeta Efficeon processor.
+
config MWINCHIPC6
bool "Winchip-C6"
help
endchoice
config X86_GENERIC
- bool "Generic x86 support"
+ bool "Generic x86 support"
help
Instead of just including optimizations for the selected
x86 variant (e.g. PII, Crusoe or Athlon), include some more
int
default "7" if MPENTIUM4 || X86_GENERIC
default "4" if X86_ELAN || M486 || M386
- default "5" if MWINCHIP3D || MWINCHIP2 || MWINCHIPC6 || MCRUSOE || MCYRIXIII || MK6 || MPENTIUMIII || MPENTIUMII || M686 || M586MMX || M586TSC || M586 || MVIAC3_2
+ default "5" if MWINCHIP3D || MWINCHIP2 || MWINCHIPC6 || MCRUSOE || MEFFICEON || MCYRIXIII || MK6 || MPENTIUMIII || MPENTIUMII || M686 || M586MMX || M586TSC || M586 || MVIAC3_2
default "6" if MK7 || MK8 || MPENTIUMM
config RWSEM_GENERIC_SPINLOCK
config X86_GOOD_APIC
bool
- depends on MK7 || MPENTIUM4 || MPENTIUMM || MPENTIUMIII || MPENTIUMII || M686 || M586MMX || MK8
+ depends on MK7 || MPENTIUM4 || MPENTIUMM || MPENTIUMIII || MPENTIUMII || M686 || M586MMX || MK8 || MEFFICEON
default y
config X86_INTEL_USERCOPY
bool
- depends on MPENTIUM4 || MPENTIUMM || MPENTIUMIII || MPENTIUMII || M586MMX || X86_GENERIC || MK8 || MK7
+ depends on MPENTIUM4 || MPENTIUMM || MPENTIUMIII || MPENTIUMII || M586MMX || X86_GENERIC || MK8 || MK7 || MEFFICEON
default y
config X86_USE_PPRO_CHECKSUM
bool
- depends on MWINCHIP3D || MWINCHIP2 || MWINCHIPC6 || MCYRIXIII || MK7 || MK6 || MPENTIUM4 || MPENTIUMM || MPENTIUMIII || MPENTIUMII || M686 || MK8 || MVIAC3_2
+ depends on MWINCHIP3D || MWINCHIP2 || MWINCHIPC6 || MCYRIXIII || MK7 || MK6 || MPENTIUM4 || MPENTIUMM || MPENTIUMIII || MPENTIUMII || M686 || MK8 || MVIAC3_2 || MEFFICEON
default y
config X86_USE_3DNOW
depends on !SMP && X86_UP_IOAPIC
default y
+config KERNEL_HZ
+ int "Timer Frequency (100-20000)"
+ range 100 20000
+ default "1000"
+ help
+ This allows you to specify the frequency at which the
+ kernel timer interrupt will occur.
+
config X86_TSC
bool
- depends on (MWINCHIP3D || MWINCHIP2 || MCRUSOE || MCYRIXIII || MK7 || MK6 || MPENTIUM4 || MPENTIUMM || MPENTIUMIII || MPENTIUMII || M686 || M586MMX || M586TSC || MK8 || MVIAC3_2) && !X86_NUMAQ
+ depends on (MWINCHIP3D || MWINCHIP2 || MCRUSOE || MEFFICEON || MCYRIXIII || MK7 || MK6 || MPENTIUM4 || MPENTIUMM || MPENTIUMIII || MPENTIUMII || M686 || M586MMX || M586TSC || MK8 || MVIAC3_2) && !X86_NUMAQ
default y
config X86_MCE
config X86_MCE_P4THERMAL
bool "check for P4 thermal throttling interrupt."
- depends on X86_MCE && (X86_UP_APIC || SMP)
+ depends on X86_MCE && (X86_UP_APIC || SMP) && !X86_VISWS
help
Enabling this feature will cause a message to be printed when the P4
enters thermal throttling.
endchoice
+choice
+ prompt "Memory Split User Space"
+ default SPLIT_3GB
+ help
+ A different Userspace/Kernel split allows you to
+ utilize up to alsmost 3GB of RAM without the requirement
+ for HIGHMEM. It also increases the available lowmem.
+
+config SPLIT_3GB
+ bool "3.0GB/1.0GB Kernel (Default)"
+ help
+ This is the default split of 3GB userspace to 1GB kernel
+ space, which will result in about 860MB of lowmem.
+
+config SPLIT_25GB
+ bool "2.5GB/1.5GB Kernel"
+ help
+ This split provides 2.5GB userspace and 1.5GB kernel
+ space, which will result in about 1370MB of lowmem.
+
+config SPLIT_2GB
+ bool "2.0GB/2.0GB Kernel"
+ help
+ This split provides 2GB userspace and 2GB kernel
+ space, which will result in about 1880MB of lowmem.
+
+config SPLIT_15GB
+ bool "1.5GB/2.5GB Kernel"
+ help
+ This split provides 1.5GB userspace and 2.5GB kernel
+ space, which will result in about 2390MB of lowmem.
+
+config SPLIT_1GB
+ bool "1.0GB/3.0GB Kernel"
+ help
+ This split provides 1GB userspace and 3GB kernel
+ space, which will result in about 2900MB of lowmem.
+
+endchoice
+
config HIGHMEM
bool
depends on HIGHMEM64G || HIGHMEM4G
source "drivers/acpi/Kconfig"
menu "APM (Advanced Power Management) BIOS Support"
-depends on PM
+depends on PM && !X86_VISWS
config APM
tristate "APM (Advanced Power Management) BIOS support"
endmenu
-
menu "Bus options (PCI, PCMCIA, EISA, MCA, ISA)"
config X86_VISWS_APIC
config PCI_MMCONFIG
bool
- depends on PCI && (PCI_GOMMCONFIG || PCI_GOANY)
+ depends on PCI && (PCI_GOMMCONFIG || (PCI_GOANY && ACPI))
select ACPI_BOOT
default y
tristate "NatSemi SCx200 support"
depends on !X86_VOYAGER
help
- This provides basic support for the National Semiconductor SCx200
+ This provides basic support for the National Semiconductor SCx200
processor. Right now this is just a driver for the GPIO pins.
If you don't know what to do here, say N.
endmenu
-
menu "Executable file formats"
source "fs/Kconfig.binfmt"
source "arch/i386/oprofile/Kconfig"
+source "arch/i386/Kconfig.debug"
-menu "Kernel hacking"
+source "kernel/vserver/Kconfig"
-config DEBUG_KERNEL
- bool "Kernel debugging"
- help
- Say Y here if you are developing drivers or trying to debug and
- identify kernel problems.
-
-config EARLY_PRINTK
- bool "Early printk" if EMBEDDED
- default y
- help
- Write kernel log output directly into the VGA buffer or to a serial
- port.
-
- This is useful for kernel debugging when your machine crashes very
- early before the console code is initialized. For normal operation
- it is not recommended because it looks ugly and doesn't cooperate
- with klogd/syslogd or the X server. You should normally N here,
- unless you want to debug such a crash.
-
-config DEBUG_STACKOVERFLOW
- bool "Check for stack overflows"
- depends on DEBUG_KERNEL
-
-config DEBUG_STACK_USAGE
- bool "Stack utilization instrumentation"
- depends on DEBUG_KERNEL
- help
- Enables the display of the minimum amount of free stack which each
- task has ever had available in the sysrq-T and sysrq-P debug output.
-
- This option will slow down process creation somewhat.
-
-config DEBUG_SLAB
- bool "Debug memory allocations"
- depends on DEBUG_KERNEL
- help
- Say Y here to have the kernel do limited verification on memory
- allocation as well as poisoning memory on free to catch use of freed
- memory.
-
-config MAGIC_SYSRQ
- bool "Magic SysRq key"
- depends on DEBUG_KERNEL
- help
- If you say Y here, you will have some control over the system even
- if the system crashes for example during kernel debugging (e.g., you
- will be able to flush the buffer cache to disk, reboot the system
- immediately or dump some status information). This is accomplished
- by pressing various keys while holding SysRq (Alt+PrintScreen). It
- also works on a serial console (on PC hardware at least), if you
- send a BREAK and then within 5 seconds a command keypress. The
- keys are documented in <file:Documentation/sysrq.txt>. Don't say Y
- unless you really know what this hack does.
-
-config DEBUG_SPINLOCK
- bool "Spinlock debugging"
- depends on DEBUG_KERNEL
- help
- Say Y here and build SMP to catch missing spinlock initialization
- and certain other kinds of spinlock errors commonly made. This is
- best used in conjunction with the NMI watchdog so that spinlock
- deadlocks are also debuggable.
-
-config DEBUG_PAGEALLOC
- bool "Page alloc debugging"
- depends on DEBUG_KERNEL
- help
- Unmap pages from the kernel linear mapping after free_pages().
- This results in a large slowdown, but helps to find certain types
- of memory corruptions.
-
-config DEBUG_HIGHMEM
- bool "Highmem debugging"
- depends on DEBUG_KERNEL && HIGHMEM
- help
- This options enables addition error checking for high memory systems.
- Disable for production systems.
-
-config DEBUG_INFO
- bool "Compile the kernel with debug info"
- depends on DEBUG_KERNEL
- help
- If you say Y here the resulting kernel image will include
- debugging info resulting in a larger kernel image.
- Say Y here only if you plan to use gdb to debug the kernel.
- If you don't debug the kernel, you can say N.
-
-config DEBUG_SPINLOCK_SLEEP
- bool "Sleep-inside-spinlock checking"
- help
- If you say Y here, various routines which may sleep will become very
- noisy if they are called with a spinlock held.
+source "security/Kconfig"
-config FRAME_POINTER
- bool "Compile the kernel with frame pointers"
- help
- If you say Y here the resulting kernel image will be slightly larger
- and slower, but it will give very useful debugging information.
- If you don't debug the kernel, you can say N, but we may not be able
- to solve problems without frame pointers.
+source "crypto/Kconfig"
-config 4KSTACKS
- bool "Use 4Kb for kernel stacks instead of 8Kb"
- help
- If you say Y here the kernel will use a 4Kb stacksize for the
- kernel stack attached to each process/thread. This facilitates
- running more threads on a system and also reduces the pressure
- on the VM subsystem for higher order allocations. This option
- will also use IRQ stacks to compensate for the reduced stackspace.
+source "lib/Kconfig"
-config X86_FIND_SMP_CONFIG
+#
+# Use the generic interrupt handling code in kernel/irq/:
+#
+config GENERIC_HARDIRQS
bool
- depends on X86_LOCAL_APIC || X86_VOYAGER
default y
-config X86_MPPARSE
+config GENERIC_IRQ_PROBE
bool
- depends on X86_LOCAL_APIC && !X86_VISWS
default y
-endmenu
-
-source "security/Kconfig"
-
-source "crypto/Kconfig"
-
-source "lib/Kconfig"
-
config X86_SMP
bool
depends on SMP && !X86_VOYAGER
git://git.onelab.eu / linux-2.6.git / blobdiff