# 19990713 Artur Skawina <skawina@geocities.com>
# Added '-march' and '-mpreferred-stack-boundary' support
#
+# 20050320 Kianusch Sayah Karadji <kianusch@sk-tech.net>
+# Added support for GEODE CPU
+
+HAS_BIARCH := $(call cc-option-yn, -m32)
+ifeq ($(HAS_BIARCH),y)
+AS := $(AS) --32
+LD := $(LD) -m elf_i386
+CC := $(CC) -m32
+endif
LDFLAGS := -m elf_i386
OBJCOPYFLAGS := -O binary -R .note -R .comment -S
-LDFLAGS_vmlinux :=
+ifdef CONFIG_RELOCATABLE
+LDFLAGS_vmlinux := --emit-relocs
+endif
CHECKFLAGS += -D__i386__
-CFLAGS += -pipe -msoft-float
+CFLAGS += -pipe -msoft-float -mregparm=3
# prevent gcc from keeping the stack 16 byte aligned
CFLAGS += $(call cc-option,-mpreferred-stack-boundary=2)
-align := $(cc-option-align)
-cflags-$(CONFIG_M386) += -march=i386
-cflags-$(CONFIG_M486) += -march=i486
-cflags-$(CONFIG_M586) += -march=i586
-cflags-$(CONFIG_M586TSC) += -march=i586
-cflags-$(CONFIG_M586MMX) += $(call cc-option,-march=pentium-mmx,-march=i586)
-cflags-$(CONFIG_M686) += -march=i686
-cflags-$(CONFIG_MPENTIUMII) += -march=i686 $(call cc-option,-mtune=pentium2)
-cflags-$(CONFIG_MPENTIUMIII) += -march=i686 $(call cc-option,-mtune=pentium3)
-cflags-$(CONFIG_MPENTIUMM) += -march=i686 $(call cc-option,-mtune=pentium3)
-cflags-$(CONFIG_MPENTIUM4) += -march=i686 $(call cc-option,-mtune=pentium4)
-cflags-$(CONFIG_MK6) += -march=k6
-# Please note, that patches that add -march=athlon-xp and friends are pointless.
-# They make zero difference whatsosever to performance at this time.
-cflags-$(CONFIG_MK7) += $(call cc-option,-march=athlon,-march=i686 $(align)-functions=4)
-cflags-$(CONFIG_MK8) += $(call cc-option,-march=k8,$(call cc-option,-march=athlon,-march=i686 $(align)-functions=4))
-cflags-$(CONFIG_MCRUSOE) += -march=i686 $(align)-functions=0 $(align)-jumps=0 $(align)-loops=0
-cflags-$(CONFIG_MEFFICEON) += -march=i686 $(call cc-option,-mtune=pentium3) $(align)-functions=0 $(align)-jumps=0 $(align)-loops=0
-cflags-$(CONFIG_MWINCHIPC6) += $(call cc-option,-march=winchip-c6,-march=i586)
-cflags-$(CONFIG_MWINCHIP2) += $(call cc-option,-march=winchip2,-march=i586)
-cflags-$(CONFIG_MWINCHIP3D) += $(call cc-option,-march=winchip2,-march=i586)
-cflags-$(CONFIG_MCYRIXIII) += $(call cc-option,-march=c3,-march=i486) $(align)-functions=0 $(align)-jumps=0 $(align)-loops=0
-cflags-$(CONFIG_MVIAC3_2) += $(call cc-option,-march=c3-2,-march=i686)
-
-# AMD Elan support
-cflags-$(CONFIG_X86_ELAN) += -march=i486
-
-# -mregparm=3 works ok on gcc-3.0 and later
-#
-GCC_VERSION := $(call cc-version)
-cflags-$(CONFIG_REGPARM) += $(shell if [ $(GCC_VERSION) -ge 0300 ] ; then echo "-mregparm=3"; fi ;)
+# CPU-specific tuning. Anything which can be shared with UML should go here.
+include $(srctree)/arch/i386/Makefile.cpu
+
+# temporary until string.h is fixed
+cflags-y += -ffreestanding
+
+# this works around some issues with generating unwind tables in older gccs
+# newer gccs do it by default
+cflags-y += -maccumulate-outgoing-args
-# Disable unit-at-a-time mode, it makes gcc use a lot more stack
-# due to the lack of sharing of stacklots.
-CFLAGS += $(call cc-option,-fno-unit-at-a-time)
+# Disable unit-at-a-time mode on pre-gcc-4.0 compilers, it makes gcc use
+# a lot more stack due to the lack of sharing of stacklots:
+CFLAGS += $(shell if [ $(call cc-version) -lt 0400 ] ; then echo $(call cc-option,-fno-unit-at-a-time); fi ;)
+
+# do binutils support CFI?
+cflags-y += $(call as-instr,.cfi_startproc\n.cfi_endproc,-DCONFIG_AS_CFI=1,)
+AFLAGS += $(call as-instr,.cfi_startproc\n.cfi_endproc,-DCONFIG_AS_CFI=1,)
+
+# is .cfi_signal_frame supported too?
+cflags-y += $(call as-instr,.cfi_startproc\n.cfi_signal_frame\n.cfi_endproc,-DCONFIG_AS_CFI_SIGNAL_FRAME=1,)
+AFLAGS += $(call as-instr,.cfi_startproc\n.cfi_signal_frame\n.cfi_endproc,-DCONFIG_AS_CFI_SIGNAL_FRAME=1,)
CFLAGS += $(cflags-y)
+cppflags-$(CONFIG_XEN) += \
+ -D__XEN_INTERFACE_VERSION__=$(CONFIG_XEN_INTERFACE_VERSION)
+
+CPPFLAGS += $(cppflags-y)
+
# Default subarch .c files
mcore-y := mach-default
mflags-$(CONFIG_X86_SUMMIT) := -Iinclude/asm-i386/mach-summit
mcore-$(CONFIG_X86_SUMMIT) := mach-default
+# Xen subarch support
+mflags-$(CONFIG_X86_XEN) := -Iinclude/asm-i386/mach-xen
+mcore-$(CONFIG_X86_XEN) := mach-xen
+
# generic subarchitecture
mflags-$(CONFIG_X86_GENERICARCH) := -Iinclude/asm-i386/mach-generic
mcore-$(CONFIG_X86_GENERICARCH) := mach-default
boot := arch/i386/boot
-.PHONY: zImage bzImage compressed zlilo bzlilo \
- zdisk bzdisk fdimage fdimage144 fdimage288 install
+PHONY += zImage bzImage compressed zlilo bzlilo \
+ zdisk bzdisk fdimage fdimage144 fdimage288 isoimage install
+
+ifdef CONFIG_XEN
+CPPFLAGS := -Iinclude$(if $(KBUILD_SRC),2)/asm/mach-xen $(CPPFLAGS)
+head-y := arch/i386/kernel/head-xen.o arch/i386/kernel/init_task-xen.o
+boot := arch/i386/boot-xen
+.PHONY: vmlinuz
+all: vmlinuz
+vmlinuz: vmlinux
+ $(Q)$(MAKE) $(build)=$(boot) $@
+
+install:
+ $(Q)$(MAKE) $(build)=$(boot) XENGUEST=$(XENGUEST) $@
+else
all: bzImage
# KBUILD_IMAGE specify target image being built
zdisk bzdisk: vmlinux
$(Q)$(MAKE) $(build)=$(boot) BOOTIMAGE=$(KBUILD_IMAGE) zdisk
-install fdimage fdimage144 fdimage288: vmlinux
+fdimage fdimage144 fdimage288 isoimage: vmlinux
$(Q)$(MAKE) $(build)=$(boot) BOOTIMAGE=$(KBUILD_IMAGE) $@
-prepare: include/asm-$(ARCH)/asm_offsets.h
-CLEAN_FILES += include/asm-$(ARCH)/asm_offsets.h
-
-arch/$(ARCH)/kernel/asm-offsets.s: include/asm include/linux/version.h \
- include/config/MARKER
-
-include/asm-$(ARCH)/asm_offsets.h: arch/$(ARCH)/kernel/asm-offsets.s
- $(call filechk,gen-asm-offsets)
+install:
+ $(Q)$(MAKE) $(build)=$(boot) BOOTIMAGE=$(KBUILD_IMAGE) install
+endif
archclean:
$(Q)$(MAKE) $(clean)=arch/i386/boot
echo ' install to $$(INSTALL_PATH) and run lilo'
echo ' bzdisk - Create a boot floppy in /dev/fd0'
echo ' fdimage - Create a boot floppy image'
+ echo ' isoimage - Create a boot CD-ROM image'
endef
-CLEAN_FILES += arch/$(ARCH)/boot/fdimage arch/$(ARCH)/boot/mtools.conf
+CLEAN_FILES += arch/$(ARCH)/boot/fdimage \
+ arch/$(ARCH)/boot/image.iso \
+ arch/$(ARCH)/boot/mtools.conf
+CLEAN_FILES += vmlinuz vmlinux-stripped