* The author(s) of this software shall not be held liable for damages
* of any nature resulting due to the use of this software. This
* software is provided AS-IS with no warranties.
- *
+ *
* Date Errata Description
* 20020525 N44, O17 12.5% or 25% DC causes lockup
*
*/
-#include <linux/config.h>
#include <linux/kernel.h>
-#include <linux/module.h>
+#include <linux/module.h>
#include <linux/init.h>
#include <linux/smp.h>
#include <linux/cpufreq.h>
#include <linux/slab.h>
#include <linux/cpumask.h>
+#include <linux/sched.h> /* current / set_cpus_allowed() */
-#include <asm/processor.h>
+#include <asm/processor.h>
#include <asm/msr.h>
#include <asm/timex.h>
} else {
dprintk("CPU#%d setting duty cycle to %d%%\n",
cpu, ((125 * newstate) / 10));
- /* bits 63 - 5 : reserved
+ /* bits 63 - 5 : reserved
* bit 4 : enable/disable
* bits 3-1 : duty cycle
* bit 0 : reserved
}
/* run on each logical CPU, see section 13.15.3 of IA32 Intel Architecture Software
- * Developer's Manual, Volume 3
+ * Developer's Manual, Volume 3
*/
cpus_allowed = current->cpus_allowed;
static unsigned int cpufreq_p4_get_frequency(struct cpuinfo_x86 *c)
{
- if ((c->x86 == 0x06) && (c->x86_model == 0x09)) {
- /* Pentium M (Banias) */
- printk(KERN_WARNING PFX "Warning: Pentium M detected. "
- "The speedstep_centrino module offers voltage scaling"
- " in addition of frequency scaling. You should use "
- "that instead of p4-clockmod, if possible.\n");
- return speedstep_get_processor_frequency(SPEEDSTEP_PROCESSOR_PM);
- }
-
- if ((c->x86 == 0x06) && (c->x86_model == 0x0D)) {
- /* Pentium M (Dothan) */
- printk(KERN_WARNING PFX "Warning: Pentium M detected. "
- "The speedstep_centrino module offers voltage scaling"
- " in addition of frequency scaling. You should use "
- "that instead of p4-clockmod, if possible.\n");
- /* on P-4s, the TSC runs with constant frequency independent whether
- * throttling is active or not. */
- p4clockmod_driver.flags |= CPUFREQ_CONST_LOOPS;
- return speedstep_get_processor_frequency(SPEEDSTEP_PROCESSOR_PM);
+ if (c->x86 == 0x06) {
+ if (cpu_has(c, X86_FEATURE_EST))
+ printk(KERN_WARNING PFX "Warning: EST-capable CPU detected. "
+ "The acpi-cpufreq module offers voltage scaling"
+ " in addition of frequency scaling. You should use "
+ "that instead of p4-clockmod, if possible.\n");
+ switch (c->x86_model) {
+ case 0x0E: /* Core */
+ case 0x0F: /* Core Duo */
+ p4clockmod_driver.flags |= CPUFREQ_CONST_LOOPS;
+ return speedstep_get_processor_frequency(SPEEDSTEP_PROCESSOR_PCORE);
+ case 0x0D: /* Pentium M (Dothan) */
+ p4clockmod_driver.flags |= CPUFREQ_CONST_LOOPS;
+ /* fall through */
+ case 0x09: /* Pentium M (Banias) */
+ return speedstep_get_processor_frequency(SPEEDSTEP_PROCESSOR_PM);
+ }
}
if (c->x86 != 0xF) {
- printk(KERN_WARNING PFX "Unknown p4-clockmod-capable CPU. Please send an e-mail to <linux@brodo.de>\n");
+ printk(KERN_WARNING PFX "Unknown p4-clockmod-capable CPU. Please send an e-mail to <cpufreq@lists.linux.org.uk>\n");
return 0;
}
return speedstep_get_processor_frequency(SPEEDSTEP_PROCESSOR_P4D);
}
-
+
static int cpufreq_p4_cpu_init(struct cpufreq_policy *policy)
{
has_N44_O17_errata[policy->cpu] = 1;
dprintk("has errata -- disabling low frequencies\n");
}
-
+
/* get max frequency */
stock_freq = cpufreq_p4_get_frequency(c);
if (!stock_freq)
p4clockmod_table[i].frequency = (stock_freq * i)/8;
}
cpufreq_frequency_table_get_attr(p4clockmod_table, policy->cpu);
-
+
/* cpuinfo and default policy values */
policy->governor = CPUFREQ_DEFAULT_GOVERNOR;
policy->cpuinfo.transition_latency = 1000000; /* assumed */
static int cpufreq_p4_cpu_exit(struct cpufreq_policy *policy)
{
- cpufreq_frequency_table_put_attr(policy->cpu);
+ cpufreq_frequency_table_put_attr(policy->cpu);
return 0;
}
};
static struct cpufreq_driver p4clockmod_driver = {
- .verify = cpufreq_p4_verify,
+ .verify = cpufreq_p4_verify,
.target = cpufreq_p4_target,
.init = cpufreq_p4_cpu_init,
.exit = cpufreq_p4_cpu_exit,
static int __init cpufreq_p4_init(void)
-{
+{
struct cpuinfo_x86 *c = cpu_data;
int ret;
/*
- * THERM_CONTROL is architectural for IA32 now, so
+ * THERM_CONTROL is architectural for IA32 now, so
* we can rely on the capability checks
*/
if (c->x86_vendor != X86_VENDOR_INTEL)