*/
.text
-#include <linux/config.h>
#include <linux/threads.h>
#include <linux/linkage.h>
#include <asm/segment.h>
#include <asm/desc.h>
#include <asm/cache.h>
#include <asm/thread_info.h>
-#include <asm/asm_offsets.h>
+#include <asm/asm-offsets.h>
#include <asm/setup.h>
/*
*/
ENTRY(startup_32)
+#ifdef CONFIG_PARAVIRT
+ movl %cs, %eax
+ testl $0x3, %eax
+ jnz startup_paravirt
+#endif
+
/*
* Set segments to known values.
*/
subl %edi,%ecx
shrl $2,%ecx
rep ; stosl
+/*
+ * Copy bootup parameters out of the way.
+ * Note: %esi still has the pointer to the real-mode data.
+ * With the kexec as boot loader, parameter segment might be loaded beyond
+ * kernel image and might not even be addressable by early boot page tables.
+ * (kexec on panic case). Hence copy out the parameters before initializing
+ * page tables.
+ */
+ movl $(boot_params - __PAGE_OFFSET),%edi
+ movl $(PARAM_SIZE/4),%ecx
+ cld
+ rep
+ movsl
+ movl boot_params - __PAGE_OFFSET + NEW_CL_POINTER,%esi
+ andl %esi,%esi
+ jnz 2f # New command line protocol
+ cmpw $(OLD_CL_MAGIC),OLD_CL_MAGIC_ADDR
+ jne 1f
+ movzwl OLD_CL_OFFSET,%esi
+ addl $(OLD_CL_BASE_ADDR),%esi
+2:
+ movl $(saved_command_line - __PAGE_OFFSET),%edi
+ movl $(COMMAND_LINE_SIZE/4),%ecx
+ rep
+ movsl
+1:
/*
* Initialize page tables. This creates a PDE and a set of page
movl %eax,%fs
movl %eax,%gs
- xorl %ebx,%ebx
- incl %ebx /* This is a secondary processor (AP) */
-
/*
* New page tables may be in 4Mbyte page mode and may
* be using the global pages.
#define cr4_bits mmu_cr4_features-__PAGE_OFFSET
movl cr4_bits,%edx
andl %edx,%edx
- jz 3f
+ jz 6f
movl %cr4,%eax # Turn on paging options (PSE,PAE,..)
orl %edx,%eax
movl %eax,%cr4
+ btl $5, %eax # check if PAE is enabled
+ jnc 6f
+
+ /* Check if extended functions are implemented */
+ movl $0x80000000, %eax
+ cpuid
+ cmpl $0x80000000, %eax
+ jbe 6f
+ mov $0x80000001, %eax
+ cpuid
+ /* Execute Disable bit supported? */
+ btl $20, %edx
+ jnc 6f
+
+ /* Setup EFER (Extended Feature Enable Register) */
+ movl $0xc0000080, %ecx
+ rdmsr
+
+ btsl $11, %eax
+ /* Make changes effective */
+ wrmsr
+
+6:
+ /* This is a secondary processor (AP) */
+ xorl %ebx,%ebx
+ incl %ebx
+
3:
#endif /* CONFIG_SMP */
*/
call setup_idt
-/*
- * Copy bootup parameters out of the way.
- * Note: %esi still has the pointer to the real-mode data.
- */
- movl $boot_params,%edi
- movl $(PARAM_SIZE/4),%ecx
- cld
- rep
- movsl
- movl boot_params+NEW_CL_POINTER,%esi
- andl %esi,%esi
- jnz 2f # New command line protocol
- cmpw $(OLD_CL_MAGIC),OLD_CL_MAGIC_ADDR
- jne 1f
- movzwl OLD_CL_OFFSET,%esi
- addl $(OLD_CL_BASE_ADDR),%esi
-2:
- movl $saved_command_line,%edi
- movl $(COMMAND_LINE_SIZE/4),%ecx
- rep
- movsl
-1:
checkCPUtype:
movl $-1,X86_CPUID # -1 for no CPUID initially
movl %eax,%cr0
call check_x87
- incb ready
+ call setup_pda
lgdt cpu_gdt_descr
lidt idt_descr
ljmp $(__KERNEL_CS),$1f
movl %eax,%ds
movl %eax,%es
- xorl %eax,%eax # Clear FS/GS and LDT
+ xorl %eax,%eax # Clear FS and LDT
movl %eax,%fs
- movl %eax,%gs
lldt %ax
+
+ movl $(__KERNEL_PDA),%eax
+ mov %eax,%gs
+
cld # gcc2 wants the direction flag cleared at all times
+ pushl $0 # fake return address for unwinder
#ifdef CONFIG_SMP
- movb ready, %cl
- cmpb $1,%cl
- je 1f # the first CPU calls start_kernel
- # all other CPUs call initialize_secondary
- call initialize_secondary
- jmp L6
-1:
+ movb ready, %cl
+ movb $1, ready
+ cmpb $0,%cl # the first CPU calls start_kernel
+ jne initialize_secondary # all other CPUs call initialize_secondary
#endif /* CONFIG_SMP */
- call start_kernel
-L6:
- jmp L6 # main should never return here, but
- # just in case, we know what happens.
+ jmp start_kernel
/*
* We depend on ET to be correct. This checks for 287/387.
.byte 0xDB,0xE4 /* fsetpm for 287, ignored by 387 */
ret
+/*
+ * Point the GDT at this CPU's PDA. On boot this will be
+ * cpu_gdt_table and boot_pda; for secondary CPUs, these will be
+ * that CPU's GDT and PDA.
+ */
+setup_pda:
+ /* get the PDA pointer */
+ movl start_pda, %eax
+
+ /* slot the PDA address into the GDT */
+ mov cpu_gdt_descr+2, %ecx
+ mov %ax, (__KERNEL_PDA+0+2)(%ecx) /* base & 0x0000ffff */
+ shr $16, %eax
+ mov %al, (__KERNEL_PDA+4+0)(%ecx) /* base & 0x00ff0000 */
+ mov %ah, (__KERNEL_PDA+4+3)(%ecx) /* base & 0xff000000 */
+ ret
+
/*
* setup_idt
*
addl $8,%edi
dec %ecx
jne rp_sidt
+
+.macro set_early_handler handler,trapno
+ lea \handler,%edx
+ movl $(__KERNEL_CS << 16),%eax
+ movw %dx,%ax
+ movw $0x8E00,%dx /* interrupt gate - dpl=0, present */
+ lea idt_table,%edi
+ movl %eax,8*\trapno(%edi)
+ movl %edx,8*\trapno+4(%edi)
+.endm
+
+ set_early_handler handler=early_divide_err,trapno=0
+ set_early_handler handler=early_illegal_opcode,trapno=6
+ set_early_handler handler=early_protection_fault,trapno=13
+ set_early_handler handler=early_page_fault,trapno=14
+
ret
+early_divide_err:
+ xor %edx,%edx
+ pushl $0 /* fake errcode */
+ jmp early_fault
+
+early_illegal_opcode:
+ movl $6,%edx
+ pushl $0 /* fake errcode */
+ jmp early_fault
+
+early_protection_fault:
+ movl $13,%edx
+ jmp early_fault
+
+early_page_fault:
+ movl $14,%edx
+ jmp early_fault
+
+early_fault:
+ cld
+#ifdef CONFIG_PRINTK
+ movl $(__KERNEL_DS),%eax
+ movl %eax,%ds
+ movl %eax,%es
+ cmpl $2,early_recursion_flag
+ je hlt_loop
+ incl early_recursion_flag
+ movl %cr2,%eax
+ pushl %eax
+ pushl %edx /* trapno */
+ pushl $fault_msg
+#ifdef CONFIG_EARLY_PRINTK
+ call early_printk
+#else
+ call printk
+#endif
+#endif
+hlt_loop:
+ hlt
+ jmp hlt_loop
+
/* This is the default interrupt "handler" :-) */
ALIGN
ignore_int:
cld
+#ifdef CONFIG_PRINTK
pushl %eax
pushl %ecx
pushl %edx
movl $(__KERNEL_DS),%eax
movl %eax,%ds
movl %eax,%es
+ cmpl $2,early_recursion_flag
+ je hlt_loop
+ incl early_recursion_flag
pushl 16(%esp)
pushl 24(%esp)
pushl 32(%esp)
pushl 40(%esp)
pushl $int_msg
+#ifdef CONFIG_EARLY_PRINTK
+ call early_printk
+#else
call printk
+#endif
addl $(5*4),%esp
popl %ds
popl %es
popl %edx
popl %ecx
popl %eax
+#endif
iret
+#ifdef CONFIG_PARAVIRT
+startup_paravirt:
+ cld
+ movl $(init_thread_union+THREAD_SIZE),%esp
+
+ /* We take pains to preserve all the regs. */
+ pushl %edx
+ pushl %ecx
+ pushl %eax
+
+ /* paravirt.o is last in link, and that probe fn never returns */
+ pushl $__start_paravirtprobe
+1:
+ movl 0(%esp), %eax
+ pushl (%eax)
+ movl 8(%esp), %eax
+ call *(%esp)
+ popl %eax
+
+ movl 4(%esp), %eax
+ movl 8(%esp), %ecx
+ movl 12(%esp), %edx
+
+ addl $4, (%esp)
+ jmp 1b
+#endif
+
/*
* Real beginning of normal "text" segment
*/
* This starts the data section.
*/
.data
+ENTRY(start_pda)
+ .long boot_pda
ENTRY(stack_start)
.long init_thread_union+THREAD_SIZE
ready: .byte 0
+early_recursion_flag:
+ .long 0
+
int_msg:
.asciz "Unknown interrupt or fault at EIP %p %p %p\n"
+fault_msg:
+ .ascii "Int %d: CR2 %p err %p EIP %p CS %p flags %p\n"
+ .asciz "Stack: %p %p %p %p %p %p %p %p\n"
+
/*
* The IDT and GDT 'descriptors' are a strange 48-bit object
* only used by the lidt and lgdt instructions. They are not
.globl boot_gdt_descr
.globl idt_descr
-.globl cpu_gdt_descr
ALIGN
# early boot GDT descriptor (must use 1:1 address mapping)
# boot GDT descriptor (later on used by CPU#0):
.word 0 # 32 bit align gdt_desc.address
-cpu_gdt_descr:
+ENTRY(cpu_gdt_descr)
.word GDT_ENTRIES*8-1
.long cpu_gdt_table
- .fill NR_CPUS-1,8,0 # space for the other GDT descriptors
-
/*
* The boot_gdt_table must mirror the equivalent in setup.S and is
* used only for booting.
/*
* The Global Descriptor Table contains 28 quadwords, per-CPU.
*/
- .align PAGE_SIZE_asm
+ .align L1_CACHE_BYTES
ENTRY(cpu_gdt_table)
.quad 0x0000000000000000 /* NULL descriptor */
.quad 0x0000000000000000 /* 0x0b reserved */
.quad 0x0000000000000000 /* 0x80 TSS descriptor */
.quad 0x0000000000000000 /* 0x88 LDT descriptor */
- /* Segments used for calling PnP BIOS */
- .quad 0x00c09a0000000000 /* 0x90 32-bit code */
- .quad 0x00809a0000000000 /* 0x98 16-bit code */
- .quad 0x0080920000000000 /* 0xa0 16-bit data */
- .quad 0x0080920000000000 /* 0xa8 16-bit data */
- .quad 0x0080920000000000 /* 0xb0 16-bit data */
+ /*
+ * Segments used for calling PnP BIOS have byte granularity.
+ * They code segments and data segments have fixed 64k limits,
+ * the transfer segment sizes are set at run time.
+ */
+ .quad 0x00409a000000ffff /* 0x90 32-bit code */
+ .quad 0x00009a000000ffff /* 0x98 16-bit code */
+ .quad 0x000092000000ffff /* 0xa0 16-bit data */
+ .quad 0x0000920000000000 /* 0xa8 16-bit data */
+ .quad 0x0000920000000000 /* 0xb0 16-bit data */
+
/*
* The APM segments have byte granularity and their bases
- * and limits are set at run time.
+ * are set at run time. All have 64k limits.
*/
- .quad 0x00409a0000000000 /* 0xb8 APM CS code */
- .quad 0x00009a0000000000 /* 0xc0 APM CS 16 code (16 bit) */
- .quad 0x0040920000000000 /* 0xc8 APM DS data */
+ .quad 0x00409a000000ffff /* 0xb8 APM CS code */
+ .quad 0x00009a000000ffff /* 0xc0 APM CS 16 code (16 bit) */
+ .quad 0x004092000000ffff /* 0xc8 APM DS data */
- .quad 0x0000000000000000 /* 0xd0 - unused */
- .quad 0x0000000000000000 /* 0xd8 - unused */
+ .quad 0x00c0920000000000 /* 0xd0 - ESPFIX SS */
+ .quad 0x00cf92000000ffff /* 0xd8 - PDA */
.quad 0x0000000000000000 /* 0xe0 - unused */
.quad 0x0000000000000000 /* 0xe8 - unused */
.quad 0x0000000000000000 /* 0xf0 - unused */
.quad 0x0000000000000000 /* 0xf8 - GDT entry 31: double-fault TSS */
-#ifdef CONFIG_SMP
- .fill (NR_CPUS-1)*GDT_ENTRIES,8,0 /* other CPU's GDT */
-#endif