* linux/arch/i386/kernel/reboot.c
*/
+#include <linux/config.h>
#include <linux/mm.h>
#include <linux/module.h>
#include <linux/delay.h>
#include <linux/mc146818rtc.h>
#include <linux/efi.h>
#include <linux/dmi.h>
+#include <linux/ctype.h>
+#include <linux/pm.h>
#include <asm/uaccess.h>
#include <asm/apic.h>
+#include <asm/desc.h>
#include "mach_reboot.h"
#include <linux/reboot_fixups.h>
* Power off function, if any
*/
void (*pm_power_off)(void);
+EXPORT_SYMBOL(pm_power_off);
static int reboot_mode;
static int reboot_thru_bios;
#ifdef CONFIG_SMP
static int reboot_cpu = -1;
-/* shamelessly grabbed from lib/vsprintf.c for readability */
-#define is_digit(c) ((c) >= '0' && (c) <= '9')
#endif
static int __init reboot_setup(char *str)
{
break;
#ifdef CONFIG_SMP
case 's': /* "smp" reboot by executing reset on BSP or other CPU*/
- if (is_digit(*(str+1))) {
+ if (isdigit(*(str+1))) {
reboot_cpu = (int) (*(str+1) - '0');
- if (is_digit(*(str+2)))
+ if (isdigit(*(str+2)))
reboot_cpu = reboot_cpu*10 + (int)(*(str+2) - '0');
}
/* we will leave sorting out the final value
DMI_MATCH(DMI_PRODUCT_NAME, "PowerEdge 2400"),
},
},
+ { /* Handle problems with rebooting on HP laptops */
+ .callback = set_bios_reboot,
+ .ident = "HP Compaq Laptop",
+ .matches = {
+ DMI_MATCH(DMI_SYS_VENDOR, "Hewlett-Packard"),
+ DMI_MATCH(DMI_PRODUCT_NAME, "HP Compaq"),
+ },
+ },
{ }
};
/* Set up the IDT for real mode. */
- __asm__ __volatile__ ("lidt %0" : : "m" (real_mode_idt));
+ load_idt(&real_mode_idt);
/* Set up a GDT from which we can load segment descriptors for real
mode. The GDT is not used in real mode; it is just needed here to
prepare the descriptors. */
- __asm__ __volatile__ ("lgdt %0" : : "m" (real_mode_gdt));
+ load_gdt(&real_mode_gdt);
/* Load the data segment registers, and thus the descriptors ready for
real mode. The base address of each segment is 0x100, 16 times the
:
: "i" ((void *) (0x1000 - sizeof (real_mode_switch) - 100)));
}
+#ifdef CONFIG_APM_MODULE
+EXPORT_SYMBOL(machine_real_restart);
+#endif
void machine_shutdown(void)
{
reboot_cpu_id = 0;
/* See if there has been given a command line override */
- if ((reboot_cpu_id != -1) && (reboot_cpu < NR_CPUS) &&
+ if ((reboot_cpu != -1) && (reboot_cpu < NR_CPUS) &&
cpu_isset(reboot_cpu, cpu_online_map)) {
reboot_cpu_id = reboot_cpu;
}
#endif
}
-void machine_restart(char * __unused)
+void machine_emergency_restart(void)
{
- machine_shutdown();
-
if (!reboot_thru_bios) {
if (efi_enabled) {
efi.reset_system(EFI_RESET_COLD, EFI_SUCCESS, 0, NULL);
- __asm__ __volatile__("lidt %0": :"m" (no_idt));
+ load_idt(&no_idt);
__asm__ __volatile__("int3");
}
/* rebooting needs to touch the page at absolute addr 0 */
mach_reboot_fixups(); /* for board specific fixups */
mach_reboot();
/* That didn't work - force a triple fault.. */
- __asm__ __volatile__("lidt %0": :"m" (no_idt));
+ load_idt(&no_idt);
__asm__ __volatile__("int3");
}
}
machine_real_restart(jump_to_bios, sizeof(jump_to_bios));
}
-EXPORT_SYMBOL(machine_restart);
+void machine_restart(char * __unused)
+{
+ machine_shutdown();
+ machine_emergency_restart();
+}
void machine_halt(void)
{
}
-EXPORT_SYMBOL(machine_halt);
-
void machine_power_off(void)
{
- lapic_shutdown();
-
- if (efi_enabled)
- efi.reset_system(EFI_RESET_SHUTDOWN, EFI_SUCCESS, 0, NULL);
- if (pm_power_off)
+ if (pm_power_off) {
+ machine_shutdown();
pm_power_off();
+ }
}
-EXPORT_SYMBOL(machine_power_off);