#include <linux/sysdev.h>
#include <linux/bcd.h>
#include <linux/efi.h>
+#include <linux/mca.h>
#include <asm/io.h>
#include <asm/smp.h>
#include "io_ports.h"
-extern spinlock_t i8259A_lock;
+#include <asm/i8259.h>
+
int pit_latch_buggy; /* extern */
#include "do_timer.h"
-u64 jiffies_64 = INITIAL_JIFFIES;
-
-EXPORT_SYMBOL(jiffies_64);
-
-unsigned long cpu_khz; /* Detected as we calibrate the TSC */
+unsigned int cpu_khz; /* Detected as we calibrate the TSC */
+EXPORT_SYMBOL(cpu_khz);
extern unsigned long wall_jiffies;
-spinlock_t rtc_lock = SPIN_LOCK_UNLOCKED;
+DEFINE_SPINLOCK(rtc_lock);
+EXPORT_SYMBOL(rtc_lock);
+
+#include <asm/i8253.h>
-spinlock_t i8253_lock = SPIN_LOCK_UNLOCKED;
+DEFINE_SPINLOCK(i8253_lock);
EXPORT_SYMBOL(i8253_lock);
-struct timer_opts *cur_timer = &timer_none;
+struct timer_opts *cur_timer __read_mostly = &timer_none;
+
+/*
+ * This is a special lock that is owned by the CPU and holds the index
+ * register we are working with. It is required for NMI access to the
+ * CMOS/RTC registers. See include/asm-i386/mc146818rtc.h for details.
+ */
+volatile unsigned long cmos_lock = 0;
+EXPORT_SYMBOL(cmos_lock);
+
+/* Routines for accessing the CMOS RAM/RTC. */
+unsigned char rtc_cmos_read(unsigned char addr)
+{
+ unsigned char val;
+ lock_cmos_prefix(addr);
+ outb_p(addr, RTC_PORT(0));
+ val = inb_p(RTC_PORT(1));
+ lock_cmos_suffix(addr);
+ return val;
+}
+EXPORT_SYMBOL(rtc_cmos_read);
+
+void rtc_cmos_write(unsigned char val, unsigned char addr)
+{
+ lock_cmos_prefix(addr);
+ outb_p(addr, RTC_PORT(0));
+ outb_p(val, RTC_PORT(1));
+ lock_cmos_suffix(addr);
+}
+EXPORT_SYMBOL(rtc_cmos_write);
/*
* This version of gettimeofday has microsecond resolution
set_normalized_timespec(&xtime, sec, nsec);
set_normalized_timespec(&wall_to_monotonic, wtm_sec, wtm_nsec);
- time_adjust = 0; /* stop active adjtime() */
- time_status |= STA_UNSYNC;
- time_maxerror = NTP_PHASE_LIMIT;
- time_esterror = NTP_PHASE_LIMIT;
+ ntp_clear();
write_sequnlock_irq(&xtime_lock);
clock_was_set();
return 0;
{
int retval;
+ WARN_ON(irqs_disabled());
+
/* gets recalled with irq locally disabled */
- spin_lock(&rtc_lock);
+ spin_lock_irq(&rtc_lock);
if (efi_enabled)
retval = efi_set_rtc_mmss(nowtime);
else
retval = mach_set_rtc_mmss(nowtime);
- spin_unlock(&rtc_lock);
+ spin_unlock_irq(&rtc_lock);
return retval;
}
-/* last time the cmos clock got updated */
-static long last_rtc_update;
int timer_ack;
* timer_interrupt() needs to keep up the real-time clock,
* as well as call the "do_timer()" routine every clocktick
*/
-static inline void do_timer_interrupt(int irq, void *dev_id,
- struct pt_regs *regs)
+static inline void do_timer_interrupt(int irq, struct pt_regs *regs)
{
#ifdef CONFIG_X86_IO_APIC
if (timer_ack) {
do_timer_interrupt_hook(regs);
- /*
- * If we have an externally synchronized Linux clock, then update
- * CMOS clock accordingly every ~11 minutes. Set_rtc_mmss() has to be
- * called as close as possible to 500 ms before the new second starts.
- */
- if ((time_status & STA_UNSYNC) == 0 &&
- xtime.tv_sec > last_rtc_update + 660 &&
- (xtime.tv_nsec / 1000)
- >= USEC_AFTER - ((unsigned) TICK_SIZE) / 2 &&
- (xtime.tv_nsec / 1000)
- <= USEC_BEFORE + ((unsigned) TICK_SIZE) / 2) {
- /* horrible...FIXME */
- if (efi_enabled) {
- if (efi_set_rtc_mmss(xtime.tv_sec) == 0)
- last_rtc_update = xtime.tv_sec;
- else
- last_rtc_update = xtime.tv_sec - 600;
- } else if (set_rtc_mmss(xtime.tv_sec) == 0)
- last_rtc_update = xtime.tv_sec;
- else
- last_rtc_update = xtime.tv_sec - 600; /* do it again in 60 s */
- }
-#ifdef CONFIG_MCA
- if( MCA_bus ) {
+ if (MCA_bus) {
/* The PS/2 uses level-triggered interrupts. You can't
turn them off, nor would you want to (any attempt to
enable edge-triggered interrupts usually gets intercepted by a
irq = inb_p( 0x61 ); /* read the current state */
outb_p( irq|0x80, 0x61 ); /* reset the IRQ */
}
-#endif
}
/*
cur_timer->mark_offset();
- do_timer_interrupt(irq, NULL, regs);
+ do_timer_interrupt(irq, regs);
write_sequnlock(&xtime_lock);
+
+#ifdef CONFIG_X86_LOCAL_APIC
+ if (using_apic_timer)
+ smp_send_timer_broadcast_ipi(regs);
+#endif
+
return IRQ_HANDLED;
}
return retval;
}
+EXPORT_SYMBOL(get_cmos_time);
-static long clock_cmos_diff;
+static void sync_cmos_clock(unsigned long dummy);
-static int time_suspend(struct sys_device *dev, u32 state)
+static DEFINE_TIMER(sync_cmos_timer, sync_cmos_clock, 0, 0);
+
+static void sync_cmos_clock(unsigned long dummy)
+{
+ struct timeval now, next;
+ int fail = 1;
+
+ /*
+ * If we have an externally synchronized Linux clock, then update
+ * CMOS clock accordingly every ~11 minutes. Set_rtc_mmss() has to be
+ * called as close as possible to 500 ms before the new second starts.
+ * This code is run on a timer. If the clock is set, that timer
+ * may not expire at the correct time. Thus, we adjust...
+ */
+ if (!ntp_synced())
+ /*
+ * Not synced, exit, do not restart a timer (if one is
+ * running, let it run out).
+ */
+ return;
+
+ do_gettimeofday(&now);
+ if (now.tv_usec >= USEC_AFTER - ((unsigned) TICK_SIZE) / 2 &&
+ now.tv_usec <= USEC_BEFORE + ((unsigned) TICK_SIZE) / 2)
+ fail = set_rtc_mmss(now.tv_sec);
+
+ next.tv_usec = USEC_AFTER - now.tv_usec;
+ if (next.tv_usec <= 0)
+ next.tv_usec += USEC_PER_SEC;
+
+ if (!fail)
+ next.tv_sec = 659;
+ else
+ next.tv_sec = 0;
+
+ if (next.tv_usec >= USEC_PER_SEC) {
+ next.tv_sec++;
+ next.tv_usec -= USEC_PER_SEC;
+ }
+ mod_timer(&sync_cmos_timer, jiffies + timeval_to_jiffies(&next));
+}
+
+void notify_arch_cmos_timer(void)
+{
+ mod_timer(&sync_cmos_timer, jiffies + 1);
+}
+
+static long clock_cmos_diff, sleep_start;
+
+static struct timer_opts *last_timer;
+static int timer_suspend(struct sys_device *dev, pm_message_t state)
{
/*
* Estimate time zone so that set_time can update the clock
*/
clock_cmos_diff = -get_cmos_time();
clock_cmos_diff += get_seconds();
+ sleep_start = get_cmos_time();
+ last_timer = cur_timer;
+ cur_timer = &timer_none;
+ if (last_timer->suspend)
+ last_timer->suspend(state);
return 0;
}
-static int time_resume(struct sys_device *dev)
+static int timer_resume(struct sys_device *dev)
{
unsigned long flags;
- unsigned long sec = get_cmos_time() + clock_cmos_diff;
+ unsigned long sec;
+ unsigned long sleep_length;
+
+#ifdef CONFIG_HPET_TIMER
+ if (is_hpet_enabled())
+ hpet_reenable();
+#endif
+ setup_pit_timer();
+ sec = get_cmos_time() + clock_cmos_diff;
+ sleep_length = (get_cmos_time() - sleep_start) * HZ;
write_seqlock_irqsave(&xtime_lock, flags);
xtime.tv_sec = sec;
xtime.tv_nsec = 0;
+ jiffies_64 += sleep_length;
+ wall_jiffies += sleep_length;
write_sequnlock_irqrestore(&xtime_lock, flags);
+ if (last_timer->resume)
+ last_timer->resume();
+ cur_timer = last_timer;
+ last_timer = NULL;
+ touch_softlockup_watchdog();
return 0;
}
-static struct sysdev_class pit_sysclass = {
- .resume = time_resume,
- .suspend = time_suspend,
- set_kset_name("pit"),
+static struct sysdev_class timer_sysclass = {
+ .resume = timer_resume,
+ .suspend = timer_suspend,
+ set_kset_name("timer"),
};
/* XXX this driverfs stuff should probably go elsewhere later -john */
-static struct sys_device device_i8253 = {
+static struct sys_device device_timer = {
.id = 0,
- .cls = &pit_sysclass,
+ .cls = &timer_sysclass,
};
static int time_init_device(void)
{
- int error = sysdev_class_register(&pit_sysclass);
+ int error = sysdev_class_register(&timer_sysclass);
if (!error)
- error = sysdev_register(&device_i8253);
+ error = sysdev_register(&device_timer);
return error;
}
#ifdef CONFIG_HPET_TIMER
extern void (*late_time_init)(void);
/* Duplicate of time_init() below, with hpet_enable part added */
-void __init hpet_time_init(void)
+static void __init hpet_time_init(void)
{
xtime.tv_sec = get_cmos_time();
- wall_to_monotonic.tv_sec = -xtime.tv_sec;
xtime.tv_nsec = (INITIAL_JIFFIES % HZ) * (NSEC_PER_SEC / HZ);
- wall_to_monotonic.tv_nsec = -xtime.tv_nsec;
+ set_normalized_timespec(&wall_to_monotonic,
+ -xtime.tv_sec, -xtime.tv_nsec);
- if (hpet_enable() >= 0) {
+ if ((hpet_enable() >= 0) && hpet_use_timer) {
printk("Using HPET for base-timer\n");
}
}
#endif
xtime.tv_sec = get_cmos_time();
- wall_to_monotonic.tv_sec = -xtime.tv_sec;
xtime.tv_nsec = (INITIAL_JIFFIES % HZ) * (NSEC_PER_SEC / HZ);
- wall_to_monotonic.tv_nsec = -xtime.tv_nsec;
+ set_normalized_timespec(&wall_to_monotonic,
+ -xtime.tv_sec, -xtime.tv_nsec);
cur_timer = select_timer();
printk(KERN_INFO "Using %s for high-res timesource\n",cur_timer->name);
git://git.onelab.eu / linux-2.6.git / blobdiff