config IA64
bool
+ select ATA_NONSTANDARD if ATA
default y
help
The Itanium Processor Family is Intel's 64-bit successor to
bool
default y
+config SWIOTLB
+ bool
+ default y
+
config RWSEM_XCHGADD_ALGORITHM
bool
default y
+config ARCH_HAS_ILOG2_U32
+ bool
+ default n
+
+config ARCH_HAS_ILOG2_U64
+ bool
+ default n
+
+config GENERIC_FIND_NEXT_BIT
+ bool
+ default y
+
+config GENERIC_CALIBRATE_DELAY
+ bool
+ default y
+
config TIME_INTERPOLATION
bool
default y
+config DMI
+ bool
+ default y
+
config EFI
bool
default y
bool
default y
+config XEN
+ bool "Xen hypervisor support"
+ default y
+ help
+ Enable Xen hypervisor support. Resulting kernel runs
+ both as a guest OS on Xen and natively on hardware.
+
+config XEN_IA64_VDSO_PARAVIRT
+ bool
+ depends on XEN && !ITANIUM
+ default y
+ help
+ vDSO paravirtualization
+
+config SCHED_NO_NO_OMIT_FRAME_POINTER
+ bool
+ default y
+
+config IA64_UNCACHED_ALLOCATOR
+ bool
+ select GENERIC_ALLOCATOR
+
+config AUDIT_ARCH
+ bool
+ default y
+
choice
prompt "System type"
default IA64_GENERIC
config IA64_GENERIC
bool "generic"
+ select ACPI
+ select PCI
select NUMA
select ACPI_NUMA
- select VIRTUAL_MEM_MAP
- select DISCONTIGMEM
help
This selects the system type of your hardware. A "generic" kernel
will run on any supported IA-64 system. However, if you configure
a kernel for your specific system, it will be faster and smaller.
- generic For any supported IA-64 system
- DIG-compliant For DIG ("Developer's Interface Guide") compliant systems
- HP-zx1/sx1000 For HP systems
- SGI-SN2 For SGI Altix systems
- Ski-simulator For the HP simulator <http://www.hpl.hp.com/research/linux/ski/>
+ generic For any supported IA-64 system
+ DIG-compliant For DIG ("Developer's Interface Guide") compliant systems
+ HP-zx1/sx1000 For HP systems
+ HP-zx1/sx1000+swiotlb For HP systems with (broken) DMA-constrained devices.
+ SGI-SN2 For SGI Altix systems
+ Ski-simulator For the HP simulator <http://www.hpl.hp.com/research/linux/ski/>
If you don't know what to do, choose "generic".
Build a kernel that runs on HP zx1 and sx1000 systems. This adds
support for the HP I/O MMU.
+config IA64_HP_ZX1_SWIOTLB
+ bool "HP-zx1/sx1000 with software I/O TLB"
+ help
+ Build a kernel that runs on HP zx1 and sx1000 systems even when they
+ have broken PCI devices which cannot DMA to full 32 bits. Apart
+ from support for the HP I/O MMU, this includes support for the software
+ I/O TLB, which allows supporting the broken devices at the expense of
+ wasting some kernel memory (about 2MB by default).
+
config IA64_SGI_SN2
bool "SGI-SN2"
help
endchoice
+choice
+ prompt "Page Table Levels"
+ default PGTABLE_3
+
+config PGTABLE_3
+ bool "3 Levels"
+
+config PGTABLE_4
+ depends on !IA64_PAGE_SIZE_64KB
+ bool "4 Levels"
+
+endchoice
+
+source kernel/Kconfig.hz
+
config IA64_BRL_EMU
bool
depends on ITANIUM
default y
-config ITANIUM_BSTEP_SPECIFIC
- bool "Itanium B-step specific code"
- depends on ITANIUM
- help
- Select this option to build a kernel for an Itanium prototype system
- with a B-step CPU. You have a B-step CPU if the "revision" field in
- /proc/cpuinfo has a value in the range from 1 to 4.
-
# align cache-sensitive data to 128 bytes
config IA64_L1_CACHE_SHIFT
int
default "7" if MCKINLEY
default "6" if ITANIUM
-# align cache-sensitive data to 64 bytes
-config NUMA
- bool "NUMA support"
- depends on !IA64_HP_SIM
- default y if IA64_SGI_SN2
- help
- Say Y to compile the kernel to support NUMA (Non-Uniform Memory
- Access). This option is for configuring high-end multiprocessor
- server systems. If in doubt, say N.
-
-config VIRTUAL_MEM_MAP
- bool "Virtual mem map"
- default y if !IA64_HP_SIM
- help
- Say Y to compile the kernel with support for a virtual mem map.
- This code also only takes effect if a memory hole of greater than
- 1 Gb is found during boot. You must turn this option on if you
- require the DISCONTIGMEM option for your machine. If you are
- unsure, say Y.
-
-config DISCONTIGMEM
- bool "Discontiguous memory support"
- depends on (IA64_DIG || IA64_SGI_SN2 || IA64_GENERIC || IA64_HP_ZX1) && NUMA && VIRTUAL_MEM_MAP
- default y if (IA64_SGI_SN2 || IA64_GENERIC) && NUMA
- help
- Say Y to support efficient handling of discontiguous physical memory,
- for architectures which are either NUMA (Non-Uniform Memory Access)
- or have huge holes in the physical address space for other reasons.
- See <file:Documentation/vm/numa> for more.
-
config IA64_CYCLONE
bool "Cyclone (EXA) Time Source support"
help
depends on !IA64_HP_SIM
default y
-config IA64_SGI_SN_SIM
- bool "SGI Medusa Simulator Support"
- depends on IA64_SGI_SN2
+config IA64_SGI_SN_XP
+ tristate "Support communication between SGI SSIs"
+ depends on IA64_GENERIC || IA64_SGI_SN2
+ select IA64_UNCACHED_ALLOCATOR
help
- If you are compiling a kernel that will run under SGI's IA-64
- simulator (Medusa) then say Y, otherwise say N.
+ An SGI machine can be divided into multiple Single System
+ Images which act independently of each other and have
+ hardware based memory protection from the others. Enabling
+ this feature will allow for direct communication between SSIs
+ based on a network adapter and DMA messaging.
config FORCE_MAX_ZONEORDER
- int
- default "18"
+ int "MAX_ORDER (11 - 17)" if !HUGETLB_PAGE
+ range 11 17 if !HUGETLB_PAGE
+ default "17" if HUGETLB_PAGE
+ default "11"
config SMP
bool "Symmetric multi-processing support"
If you don't know what to do here, say N.
config NR_CPUS
- int "Maximum number of CPUs (2-512)"
- range 2 512
+ int "Maximum number of CPUs (2-1024)"
+ range 2 1024
depends on SMP
- default "64"
+ default "1024"
help
You should set this to the number of CPUs in your system, but
keep in mind that a kernel compiled for, e.g., 2 CPUs will boot but
performance hit.
config HOTPLUG_CPU
- bool "Support for hot-pluggable CPUs (EXPERIMENTAL)"
- depends on SMP && HOTPLUG && EXPERIMENTAL
+ bool "Support for hot-pluggable CPUs (EXPERIMENTAL)"
+ depends on SMP && EXPERIMENTAL
+ select HOTPLUG
default n
- ---help---
- Say Y here to experiment with turning CPUs off and on. CPUs
- can be controlled through /sys/devices/system/cpu/cpu#.
- Say N if you want to disable CPU hotplug.
+ ---help---
+ Say Y here to experiment with turning CPUs off and on. CPUs
+ can be controlled through /sys/devices/system/cpu/cpu#.
+ Say N if you want to disable CPU hotplug.
+
+config ARCH_ENABLE_MEMORY_HOTPLUG
+ def_bool y
+
+config SCHED_SMT
+ bool "SMT scheduler support"
+ depends on SMP
+ help
+ Improves the CPU scheduler's decision making when dealing with
+ Intel IA64 chips with MultiThreading at a cost of slightly increased
+ overhead in some places. If unsure say N here.
+
+config PERMIT_BSP_REMOVE
+ bool "Support removal of Bootstrap Processor"
+ depends on HOTPLUG_CPU
+ default n
+ ---help---
+ Say Y here if your platform SAL will support removal of BSP with HOTPLUG_CPU
+ support.
+
+config FORCE_CPEI_RETARGET
+ bool "Force assumption that CPEI can be re-targetted"
+ depends on PERMIT_BSP_REMOVE
+ default n
+ ---help---
+ Say Y if you need to force the assumption that CPEI can be re-targetted to
+ any cpu in the system. This hint is available via ACPI 3.0 specifications.
+ Tiger4 systems are capable of re-directing CPEI to any CPU other than BSP.
+ This option it useful to enable this feature on older BIOS's as well.
+ You can also enable this by using boot command line option force_cpei=1.
config PREEMPT
bool "Preemptible Kernel"
Say Y here if you are building a kernel for a desktop, embedded
or real-time system. Say N if you are unsure.
-config HAVE_DEC_LOCK
+source "mm/Kconfig"
+
+config ARCH_SELECT_MEMORY_MODEL
+ def_bool y
+
+config ARCH_DISCONTIGMEM_ENABLE
+ def_bool y
+ help
+ Say Y to support efficient handling of discontiguous physical memory,
+ for architectures which are either NUMA (Non-Uniform Memory Access)
+ or have huge holes in the physical address space for other reasons.
+ See <file:Documentation/vm/numa> for more.
+
+config ARCH_FLATMEM_ENABLE
+ def_bool y
+
+config ARCH_SPARSEMEM_ENABLE
+ def_bool y
+ depends on ARCH_DISCONTIGMEM_ENABLE
+
+config ARCH_DISCONTIGMEM_DEFAULT
+ def_bool y if (IA64_SGI_SN2 || IA64_GENERIC || IA64_HP_ZX1 || IA64_HP_ZX1_SWIOTLB)
+ depends on ARCH_DISCONTIGMEM_ENABLE
+
+config NUMA
+ bool "NUMA support"
+ depends on !IA64_HP_SIM && !FLATMEM
+ default y if IA64_SGI_SN2
+ select ACPI_NUMA if ACPI
+ help
+ Say Y to compile the kernel to support NUMA (Non-Uniform Memory
+ Access). This option is for configuring high-end multiprocessor
+ server systems. If in doubt, say N.
+
+config NODES_SHIFT
+ int "Max num nodes shift(3-10)"
+ range 3 10
+ default "10"
+ depends on NEED_MULTIPLE_NODES
+ help
+ This option specifies the maximum number of nodes in your SSI system.
+ MAX_NUMNODES will be 2^(This value).
+ If in doubt, use the default.
+
+config ARCH_POPULATES_NODE_MAP
+ def_bool y
+
+# VIRTUAL_MEM_MAP and FLAT_NODE_MEM_MAP are functionally equivalent.
+# VIRTUAL_MEM_MAP has been retained for historical reasons.
+config VIRTUAL_MEM_MAP
+ bool "Virtual mem map"
+ depends on !SPARSEMEM
+ default y if !IA64_HP_SIM
+ help
+ Say Y to compile the kernel with support for a virtual mem map.
+ This code also only takes effect if a memory hole of greater than
+ 1 Gb is found during boot. You must turn this option on if you
+ require the DISCONTIGMEM option for your machine. If you are
+ unsure, say Y.
+
+config HOLES_IN_ZONE
bool
- depends on (SMP || PREEMPT)
- default y
+ default y if VIRTUAL_MEM_MAP
+
+config HAVE_ARCH_EARLY_PFN_TO_NID
+ def_bool y
+ depends on NEED_MULTIPLE_NODES
+
+config HAVE_ARCH_NODEDATA_EXTENSION
+ def_bool y
+ depends on NUMA
config IA32_SUPPORT
bool "Support for Linux/x86 binaries"
To use this option, you have to ensure that the "/proc file system
support" (CONFIG_PROC_FS) is enabled, too.
+config SGI_SN
+ def_bool y if (IA64_SGI_SN2 || IA64_GENERIC)
+
+config IA64_ESI
+ bool "ESI (Extensible SAL Interface) support"
+ help
+ If you say Y here, support is built into the kernel to
+ make ESI calls. ESI calls are used to support vendor-specific
+ firmware extensions, such as the ability to inject memory-errors
+ for test-purposes. If you're unsure, say N.
+
+source "drivers/sn/Kconfig"
+
+config KEXEC
+ bool "kexec system call (EXPERIMENTAL)"
+ depends on EXPERIMENTAL && !IA64_HP_SIM && (!SMP || HOTPLUG_CPU)
+ help
+ kexec is a system call that implements the ability to shutdown your
+ current kernel, and to start another kernel. It is like a reboot
+ but it is indepedent of the system firmware. And like a reboot
+ you can start any kernel with it, not just Linux.
+
+ The name comes from the similiarity to the exec system call.
+
+ It is an ongoing process to be certain the hardware in a machine
+ is properly shutdown, so do not be surprised if this code does not
+ initially work for you. It may help to enable device hotplugging
+ support. As of this writing the exact hardware interface is
+ strongly in flux, so no good recommendation can be made.
+
+config CRASH_DUMP
+ bool "kernel crash dumps (EXPERIMENTAL)"
+ depends on EXPERIMENTAL && IA64_MCA_RECOVERY && !IA64_HP_SIM && (!SMP || HOTPLUG_CPU)
+ help
+ Generate crash dump after being started by kexec.
+
source "drivers/firmware/Kconfig"
source "fs/Kconfig.binfmt"
menu "Power management and ACPI"
-config PM
- bool "Power Management support"
- depends on IA64_GENERIC || IA64_DIG || IA64_HP_ZX1
- default y
- help
- "Power Management" means that parts of your computer are shut
- off or put into a power conserving "sleep" mode if they are not
- being used. There are two competing standards for doing this: APM
- and ACPI. If you want to use either one, say Y here and then also
- to the requisite support below.
-
- Power Management is most important for battery powered laptop
- computers; if you have a laptop, check out the Linux Laptop home
- page on the WWW at <http://www.linux-on-laptops.com/> and the
- Battery Powered Linux mini-HOWTO, available from
- <http://www.tldp.org/docs.html#howto>.
-
- Note that, even if you say N here, Linux on the x86 architecture
- will issue the hlt instruction if nothing is to be done, thereby
- sending the processor to sleep and saving power.
-
-config ACPI
- bool
- depends on !IA64_HP_SIM
- default y
-
-if !IA64_HP_SIM
+source "kernel/power/Kconfig"
source "drivers/acpi/Kconfig"
+if PM
+
+source "arch/ia64/kernel/cpufreq/Kconfig"
+
endif
endmenu
config PCI
bool "PCI support"
help
- Find out whether you have a PCI motherboard. PCI is the name of a
- bus system, i.e. the way the CPU talks to the other stuff inside
- your box. Other bus systems are ISA, EISA, MicroChannel (MCA) or
- VESA. If you have PCI, say Y, otherwise N.
-
- The PCI-HOWTO, available from
- <http://www.tldp.org/docs.html#howto>, contains valuable
- information about which PCI hardware does work under Linux and which
- doesn't.
+ Real IA-64 machines all have PCI/PCI-X/PCI Express busses. Say Y
+ here unless you are using a simulator without PCI support.
config PCI_DOMAINS
bool
default PCI
+config XEN_PCIDEV_FRONTEND
+ bool "Xen PCI Frontend"
+ depends on PCI && XEN
+ default y
+ help
+ The PCI device frontend driver allows the kernel to import arbitrary
+ PCI devices from a PCI backend to support PCI driver domains.
+
+config XEN_PCIDEV_FE_DEBUG
+ bool "Xen PCI Frontend Debugging"
+ depends on XEN_PCIDEV_FRONTEND
+ default n
+ help
+ Enables some debug statements within the PCI Frontend.
+
+source "drivers/pci/pcie/Kconfig"
+
source "drivers/pci/Kconfig"
source "drivers/pci/hotplug/Kconfig"
endif
+source "net/Kconfig"
+
source "drivers/Kconfig"
+config MSPEC
+ tristate "Memory special operations driver"
+ depends on IA64
+ select IA64_UNCACHED_ALLOCATOR
+ help
+ If you have an ia64 and you want to enable memory special
+ operations support (formerly known as fetchop), say Y here,
+ otherwise say N.
+
source "fs/Kconfig"
source "lib/Kconfig"
+#
+# Use the generic interrupt handling code in kernel/irq/:
+#
+config GENERIC_HARDIRQS
+ bool
+ default y
+
+config GENERIC_IRQ_PROBE
+ bool
+ default y
+
+config GENERIC_PENDING_IRQ
+ bool
+ depends on GENERIC_HARDIRQS && SMP
+ default y
+
+config IRQ_PER_CPU
+ bool
+ default y
+
source "arch/ia64/hp/sim/Kconfig"
+menu "Instrumentation Support"
+ depends on EXPERIMENTAL
+
source "arch/ia64/oprofile/Kconfig"
+config KPROBES
+ bool "Kprobes (EXPERIMENTAL)"
+ depends on KALLSYMS && EXPERIMENTAL && MODULES
+ help
+ Kprobes allows you to trap at almost any kernel address and
+ execute a callback function. register_kprobe() establishes
+ a probepoint and specifies the callback. Kprobes is useful
+ for kernel debugging, non-intrusive instrumentation and testing.
+ If in doubt, say "N".
+endmenu
+
source "arch/ia64/Kconfig.debug"
source "kernel/vserver/Kconfig"
source "security/Kconfig"
source "crypto/Kconfig"
+
+#
+# override default values of drivers/xen/Kconfig
+#
+if XEN
+config XEN_UTIL
+ default n
+
+config HAVE_ARCH_ALLOC_SKB
+ default y
+
+config HAVE_ARCH_DEV_ALLOC_SKB
+ default y
+
+config XEN_BALLOON
+ default y
+
+config XEN_SKBUFF
+ default y
+
+config XEN_DEVMEM
+ default n
+
+config XEN_REBOOT
+ default y
+
+config XEN_SMPBOOT
+ default n
+endif
+
+source "drivers/xen/Kconfig"
git://git.onelab.eu / linux-2.6.git / blobdiff