**
*/
-#include <linux/config.h>
#include <linux/types.h>
#include <linux/kernel.h>
#include <linux/module.h>
** If a device prefetches beyond the end of a valid pdir entry, it will cause
** a hard failure, ie. MCA. Version 3.0 and later of the zx1 LBA should
** disconnect on 4k boundaries and prevent such issues. If the device is
-** particularly agressive, this option will keep the entire pdir valid such
+** particularly aggressive, this option will keep the entire pdir valid such
** that prefetching will hit a valid address. This could severely impact
** error containment, and is therefore off by default. The page that is
** used for spill-over is poisoned, so that should help debugging somewhat.
*/
#define DELAYED_RESOURCE_CNT 64
+#define PCI_DEVICE_ID_HP_SX2000_IOC 0x12ec
+
#define ZX1_IOC_ID ((PCI_DEVICE_ID_HP_ZX1_IOC << 16) | PCI_VENDOR_ID_HP)
#define ZX2_IOC_ID ((PCI_DEVICE_ID_HP_ZX2_IOC << 16) | PCI_VENDOR_ID_HP)
#define REO_IOC_ID ((PCI_DEVICE_ID_HP_REO_IOC << 16) | PCI_VENDOR_ID_HP)
#define SX1000_IOC_ID ((PCI_DEVICE_ID_HP_SX1000_IOC << 16) | PCI_VENDOR_ID_HP)
+#define SX2000_IOC_ID ((PCI_DEVICE_ID_HP_SX2000_IOC << 16) | PCI_VENDOR_ID_HP)
#define ZX1_IOC_OFFSET 0x1000 /* ACPI reports SBA, we want IOC */
/*
** DMA_CHUNK_SIZE is used by the SCSI mid-layer to break up
-** (or rather not merge) DMA's into managable chunks.
+** (or rather not merge) DMAs into manageable chunks.
** On parisc, this is more of the software/tuning constraint
-** rather than the HW. I/O MMU allocation alogorithms can be
-** faster with smaller size is (to some degree).
+** rather than the HW. I/O MMU allocation algorithms can be
+** faster with smaller sizes (to some degree).
*/
#define DMA_CHUNK_SIZE (BITS_PER_LONG*iovp_size)
* See Documentation/DMA-mapping.txt
*/
void *
-sba_alloc_coherent (struct device *dev, size_t size, dma_addr_t *dma_handle, int flags)
+sba_alloc_coherent (struct device *dev, size_t size, dma_addr_t *dma_handle, gfp_t flags)
{
struct ioc *ioc;
void *addr;
* SAC (single address cycle) addressable, so allocate a
* pseudo-device to enforce that.
*/
- sac = kmalloc(sizeof(*sac), GFP_KERNEL);
+ sac = kzalloc(sizeof(*sac), GFP_KERNEL);
if (!sac)
panic(PFX "Couldn't allocate struct pci_dev");
- memset(sac, 0, sizeof(*sac));
- controller = kmalloc(sizeof(*controller), GFP_KERNEL);
+ controller = kzalloc(sizeof(*controller), GFP_KERNEL);
if (!controller)
panic(PFX "Couldn't allocate struct pci_controller");
- memset(controller, 0, sizeof(*controller));
controller->iommu = ioc;
sac->sysdata = controller;
{ ZX1_IOC_ID, "zx1", ioc_zx1_init },
{ ZX2_IOC_ID, "zx2", NULL },
{ SX1000_IOC_ID, "sx1000", NULL },
+ { SX2000_IOC_ID, "sx2000", NULL },
};
static struct ioc * __init
struct ioc *ioc;
struct ioc_iommu *info;
- ioc = kmalloc(sizeof(*ioc), GFP_KERNEL);
+ ioc = kzalloc(sizeof(*ioc), GFP_KERNEL);
if (!ioc)
return NULL;
- memset(ioc, 0, sizeof(*ioc));
-
ioc->next = ioc_list;
ioc_list = ioc;
if (pxm < 0)
return;
- node = pxm_to_nid_map[pxm];
+ node = pxm_to_node(pxm);
if (node >= MAX_NUMNODES || !node_online(node))
return;
if (!iovp_shift)
iovp_shift = min(PAGE_SHIFT, 16);
}
- ACPI_MEM_FREE(dev_info);
+ kfree(dev_info);
/*
* default anything not caught above or specified on cmdline to 4k
static int __init
sba_init(void)
{
+ if (!ia64_platform_is("hpzx1") && !ia64_platform_is("hpzx1_swiotlb"))
+ return 0;
+
acpi_bus_register_driver(&acpi_sba_ioc_driver);
- if (!ioc_list)
+ if (!ioc_list) {
+#ifdef CONFIG_IA64_GENERIC
+ extern int swiotlb_late_init_with_default_size (size_t size);
+
+ /*
+ * If we didn't find something sba_iommu can claim, we
+ * need to setup the swiotlb and switch to the dig machvec.
+ */
+ if (swiotlb_late_init_with_default_size(64 * (1<<20)) != 0)
+ panic("Unable to find SBA IOMMU or initialize "
+ "software I/O TLB: Try machvec=dig boot option");
+ machvec_init("dig");
+#else
+ panic("Unable to find SBA IOMMU: Try a generic or DIG kernel");
+#endif
return 0;
+ }
+
+#if defined(CONFIG_IA64_GENERIC) || defined(CONFIG_IA64_HP_ZX1_SWIOTLB)
+ /*
+ * hpzx1_swiotlb needs to have a fairly small swiotlb bounce
+ * buffer setup to support devices with smaller DMA masks than
+ * sba_iommu can handle.
+ */
+ if (ia64_platform_is("hpzx1_swiotlb")) {
+ extern void hwsw_init(void);
+
+ hwsw_init();
+ }
+#endif
#ifdef CONFIG_PCI
{
subsys_initcall(sba_init); /* must be initialized after ACPI etc., but before any drivers... */
-extern void dig_setup(char**);
-/*
- * MAX_DMA_ADDRESS needs to be setup prior to paging_init to do any good,
- * so we use the platform_setup hook to fix it up.
- */
-void __init
-sba_setup(char **cmdline_p)
-{
- MAX_DMA_ADDRESS = ~0UL;
- dig_setup(cmdline_p);
-}
-
static int __init
nosbagart(char *str)
{