bool
default y
-config UID16
+config RWSEM_GENERIC_SPINLOCK
bool
default y
-config RWSEM_GENERIC_SPINLOCK
+config RWSEM_XCHGADD_ALGORITHM
+ bool
+
+config ARCH_HAS_ILOG2_U32
+ bool
+ default n
+
+config ARCH_HAS_ILOG2_U64
+ bool
+ default n
+
+config GENERIC_HWEIGHT
bool
default y
-config RWSEM_XCHGADD_ALGORITHM
+config GENERIC_CALIBRATE_DELAY
+ bool
+ default y
+
+config TIME_LOW_RES
bool
+ default y
+config ARCH_MAY_HAVE_PC_FDC
+ bool
+ depends on Q40 || (BROKEN && SUN3X)
+ default y
mainmenu "Linux/68k Kernel Configuration"
source "init/Kconfig"
-
menu "Platform dependent setup"
config EISA
select MMU_SUN3 if MMU
help
This option enables support for the Sun 3 series of workstations
- (3/50, 3/60, 3/1xx, 3/2xx systems). Enabling this option requires
- that all other hardware types must be disabled, as Sun 3 kernels
- are incompatible with all other m68k targets (including Sun 3x!).
+ (3/50, 3/60, 3/1xx, 3/2xx systems). Enabling this option requires
+ that all other hardware types must be disabled, as Sun 3 kernels
+ are incompatible with all other m68k targets (including Sun 3x!).
If you don't want to compile a kernel exclusively for a Sun 3, say N.
drivers for SCSI, Ethernet and serial ports later on.
config HP300
- bool "HP9000/300 support"
+ bool "HP9000/300 and HP9000/400 support"
depends on !MMU_SUN3
help
- This option enables support for the HP9000/300 series of
- workstations. Support for these machines is still very experimental.
- If you plan to try to use the kernel on such a machine say Y here.
+ This option enables support for the HP9000/300 and HP9000/400 series
+ of workstations. Support for these machines is still somewhat
+ experimental. If you plan to try to use the kernel on such a machine
+ say Y here.
Everybody else says N.
config DIO
bool "DIO bus support"
depends on HP300
+ default y
help
Say Y here to enable support for the "DIO" expansion bus used in
HP300 machines. If you are using such a system you almost certainly
is hardwired on. The 53c710 SCSI driver is known to suffer from
this problem.
-endmenu
+source "mm/Kconfig"
+endmenu
menu "General setup"
Include support in the kernel for pcmcia on Amiga 1200 and Amiga
600. If you intend to use pcmcia cards say Y; otherwise say N.
-config STRAM_SWAP
- bool "Support for ST-RAM as swap space"
- depends on ATARI && BROKEN
- ---help---
- Some Atari 68k macines (including the 520STF and 1020STE) divide
- their addressible memory into ST and TT sections. The TT section
- (up to 512MB) is the main memory; the ST section (up to 4MB) is
- accessible to the built-in graphics board, runs slower, and is
- present mainly for backward compatibility with older machines.
-
- This enables support for using (parts of) ST-RAM as swap space,
- instead of as normal system memory. This can first enhance system
- performance if you have lots of alternate RAM (compared to the size
- of ST-RAM), because executable code always will reside in faster
- memory. ST-RAM will remain as ultra-fast swap space. On the other
- hand, it allows much improved dynamic allocations of ST-RAM buffers
- for device driver modules (e.g. floppy, ACSI, SLM printer, DMA
- sound). The probability that such allocations at module load time
- fail is drastically reduced.
-
config STRAM_PROC
bool "ST-RAM statistics in /proc"
depends on ATARI
help
- Say Y here to report ST-RAM usage statistics in /proc/stram. See
- the help for CONFIG_STRAM_SWAP for discussion of ST-RAM and its
- uses.
+ Say Y here to report ST-RAM usage statistics in /proc/stram.
config HEARTBEAT
bool "Use power LED as a heartbeat" if AMIGA || APOLLO || ATARI || MAC ||Q40
endmenu
-source "drivers/Kconfig"
+source "net/Kconfig"
+source "drivers/Kconfig"
menu "Character devices"
config HPDCA
tristate "HP DCA serial support"
- depends on DIO
+ depends on DIO && SERIAL_8250
help
If you want to use the internal "DCA" serial ports on an HP300
machine, say Y here.
+config HPAPCI
+ tristate "HP APCI serial support"
+ depends on HP300 && SERIAL_8250 && EXPERIMENTAL
+ help
+ If you want to use the internal "APCI" serial ports on an HP400
+ machine, say Y here.
+
config MVME147_SCC
bool "SCC support for MVME147 serial ports"
depends on MVME147
config SERIAL167
bool "CD2401 support for MVME166/7 serial ports"
- depends on MVME16x && BROKEN
+ depends on MVME16x
help
This is the driver for the serial ports on the Motorola MVME166,
167, and 172 boards. Everyone using one of these boards should say
config SERIAL_CONSOLE
bool "Support for serial port console"
- depends on (AMIGA || ATARI || MAC || HP300 || SUN3 || SUN3X || VME || APOLLO) && (ATARI_MFPSER=y || ATARI_SCC=y || ATARI_MIDI=y || MAC_SCC=y || AMIGA_BUILTIN_SERIAL=y || GVPIOEXT=y || MULTIFACE_III_TTY=y || HPDCA=y || SERIAL=y || MVME147_SCC || SERIAL167 || MVME162_SCC || BVME6000_SCC || DN_SERIAL)
+ depends on (AMIGA || ATARI || MAC || SUN3 || SUN3X || VME || APOLLO) && (ATARI_MFPSER=y || ATARI_SCC=y || ATARI_MIDI=y || MAC_SCC=y || AMIGA_BUILTIN_SERIAL=y || GVPIOEXT=y || MULTIFACE_III_TTY=y || SERIAL=y || MVME147_SCC || SERIAL167 || MVME162_SCC || BVME6000_SCC || DN_SERIAL)
---help---
If you say Y here, it will be possible to use a serial port as the
system console (the system console is the device which receives all
source "fs/Kconfig"
-menu "Kernel hacking"
-
-config DEBUG_KERNEL
- bool "Kernel debugging"
-
-config MAGIC_SYSRQ
- bool "Magic SysRq key"
- depends on DEBUG_KERNEL
- help
- If you say Y here, you will have some control over the system even
- if the system crashes for example during kernel debugging (e.g., you
- will be able to flush the buffer cache to disk, reboot the system
- immediately or dump some status information). This is accomplished
- by pressing various keys while holding SysRq (Alt+PrintScreen). It
- also works on a serial console (on PC hardware at least), if you
- send a BREAK and then within 5 seconds a command keypress. The
- keys are documented in <file:Documentation/sysrq.txt>. Don't say Y
- unless you really know what this hack does.
-
-config DEBUG_SLAB
- bool "Debug memory allocations"
- depends on DEBUG_KERNEL
-
-config DEBUG_BUGVERBOSE
- bool "Verbose BUG() reporting"
- depends on DEBUG_KERNEL
-
-config DEBUG_INFO
- bool "Compile the kernel with debug info"
- depends on DEBUG_KERNEL
- help
- If you say Y here the resulting kernel image will include
- debugging info resulting in a larger kernel image.
- Say Y here only if you plan to use gdb to debug the kernel.
- If you don't debug the kernel, you can say N.
-
-endmenu
+source "arch/m68k/Kconfig.debug"
+
+source "kernel/vserver/Kconfig"
source "security/Kconfig"
source "crypto/Kconfig"
source "lib/Kconfig"
-
git://git.onelab.eu / linux-2.6.git / blobdiff