/*
* Atari interrupt handling scheme:
* --------------------------------
- *
+ *
* All interrupt source have an internal number (defined in
* <asm/atariints.h>): Autovector interrupts are 1..7, then follow ST-MFP,
* TT-MFP, SCC, and finally VME interrupts. Vector numbers for the latter can
* be allocated by atari_register_vme_int().
*
* Each interrupt can be of three types:
- *
+ *
* - SLOW: The handler runs with all interrupts enabled, except the one it
* was called by (to avoid reentering). This should be the usual method.
* But it is currently possible only for MFP ints, since only the MFP
* the sr copy in the frame.
*/
+#if 0
#define NUM_INT_SOURCES (8 + NUM_ATARI_SOURCES)
*/
static struct irqparam irq_param[NUM_INT_SOURCES];
-/*
- * Bitmap for free interrupt vector numbers
- * (new vectors starting from 0x70 can be allocated by
- * atari_register_vme_int())
- */
-static int free_vme_vec_bitmap;
-
/* check for valid int number (complex, sigh...) */
#define IS_VALID_INTNO(n) \
((n) > 0 && \
" movew %%d1,%%sr\n" /* set IPL = previous value */ \
" addql #1,%a0\n" \
" lea %a1,%%a0\n" \
-" pea %%sp@\n" /* push addr of frame */ \
+" pea %%sp@\n" /* push addr of frame */ \
" movel %%a0@(4),%%sp@-\n" /* push handler data */ \
-" pea (%c3+8)\n" /* push int number */ \
+" pea (%c3+8)\n" /* push int number */ \
" movel %%a0@,%%a0\n" \
" jbsr %%a0@\n" /* call the handler */ \
" addql #8,%%sp\n" \
" addql #4,%%sp\n" \
" orw #0x0600,%%sr\n" \
" andw #0xfeff,%%sr\n" /* set IPL = 6 again */ \
-" orb #(1<<(%c3&7)),%a4:w\n" /* now unmask the int again */ \
+" orb #(1<<(%c3&7)),%a4:w\n" /* now unmask the int again */ \
" jbra ret_from_interrupt\n" \
: : "i" (&kstat_cpu(0).irqs[n+8]), "i" (&irq_handler[n+8]), \
"n" (PT_OFF_SR), "n" (n), \
void atari_fast_prio_irq_dummy (void) {
__asm__ (__ALIGN_STR "\n"
"atari_fast_irq_handler:\n\t"
- "orw #0x700,%%sr\n" /* disable all interrupts */
+ "orw #0x700,%%sr\n" /* disable all interrupts */
"atari_prio_irq_handler:\n\t"
"addl %3,%2\n\t" /* preempt_count() += HARDIRQ_OFFSET */
SAVE_ALL_INT "\n\t"
/* get vector number from stack frame and convert to source */
"bfextu %%sp@(%c1){#4,#10},%%d0\n\t"
"subw #(0x40-8),%%d0\n\t"
- "jpl 1f\n\t"
+ "jpl 1f\n\t"
"addw #(0x40-8-0x18),%%d0\n"
"1:\tlea %a0,%%a0\n\t"
"addql #1,%%a0@(%%d0:l:4)\n\t"
"lea irq_handler,%%a0\n\t"
"lea %%a0@(%%d0:l:8),%%a0\n\t"
- "pea %%sp@\n\t" /* push frame address */
+ "pea %%sp@\n\t" /* push frame address */
"movel %%a0@(4),%%sp@-\n\t" /* push handler data */
"movel %%d0,%%sp@-\n\t" /* push int number */
"movel %%a0@,%%a0\n\t"
);
for (;;);
}
+#endif
+
+/*
+ * Bitmap for free interrupt vector numbers
+ * (new vectors starting from 0x70 can be allocated by
+ * atari_register_vme_int())
+ */
+static int free_vme_vec_bitmap;
/* GK:
* HBL IRQ handler for Falcon. Nobody needs it :-)
"orw #0x200,%sp@\n\t" /* set saved ipl to 2 */
"rte");
-/* Defined in entry.S; only increments 'num_spurious' */
-asmlinkage void bad_interrupt(void);
-
-extern void atari_microwire_cmd( int cmd );
+extern void atari_microwire_cmd(int cmd);
extern int atari_SCC_reset_done;
+static int atari_startup_irq(unsigned int irq)
+{
+ m68k_irq_startup(irq);
+ atari_turnon_irq(irq);
+ atari_enable_irq(irq);
+ return 0;
+}
+
+static void atari_shutdown_irq(unsigned int irq)
+{
+ atari_disable_irq(irq);
+ atari_turnoff_irq(irq);
+ m68k_irq_shutdown(irq);
+
+ if (irq == IRQ_AUTO_4)
+ vectors[VEC_INT4] = falcon_hblhandler;
+}
+
+static struct irq_controller atari_irq_controller = {
+ .name = "atari",
+ .lock = SPIN_LOCK_UNLOCKED,
+ .startup = atari_startup_irq,
+ .shutdown = atari_shutdown_irq,
+ .enable = atari_enable_irq,
+ .disable = atari_disable_irq,
+};
+
/*
* void atari_init_IRQ (void)
*
void __init atari_init_IRQ(void)
{
- int i;
-
- /* initialize the vector table */
- for (i = 0; i < NUM_INT_SOURCES; ++i) {
- vectors[IRQ_SOURCE_TO_VECTOR(i)] = bad_interrupt;
- }
+ m68k_setup_user_interrupt(VEC_USER, NUM_ATARI_SOURCES - IRQ_USER, NULL);
+ m68k_setup_irq_controller(&atari_irq_controller, 1, NUM_ATARI_SOURCES - 1);
/* Initialize the MFP(s) */
* enabled in VME mask
*/
tt_scu.vme_mask = 0x60; /* enable MFP and SCC ints */
- }
- else {
+ } else {
/* If no SCU and no Hades, the HSYNC interrupt needs to be
* disabled this way. (Else _inthandler in kernel/sys_call.S
* gets overruns)
*/
- if (!MACH_IS_HADES)
+ if (!MACH_IS_HADES) {
vectors[VEC_INT2] = falcon_hblhandler;
+ vectors[VEC_INT4] = falcon_hblhandler;
+ }
}
if (ATARIHW_PRESENT(PCM_8BIT) && ATARIHW_PRESENT(MICROWIRE)) {
be in an atasound_init(), that doesn't exist yet. */
atari_microwire_cmd(MW_LM1992_PSG_HIGH);
}
-
+
stdma_init();
/* Initialize the PSG: all sounds off, both ports output */
}
-static irqreturn_t atari_call_irq_list( int irq, void *dev_id, struct pt_regs *fp )
-{
- irq_node_t *node;
-
- for (node = (irq_node_t *)dev_id; node; node = node->next)
- node->handler(irq, node->dev_id, fp);
- return IRQ_HANDLED;
-}
-
-
-/*
- * atari_request_irq : add an interrupt service routine for a particular
- * machine specific interrupt source.
- * If the addition was successful, it returns 0.
- */
-
-int atari_request_irq(unsigned int irq, irqreturn_t (*handler)(int, void *, struct pt_regs *),
- unsigned long flags, const char *devname, void *dev_id)
-{
- int vector;
- unsigned long oflags = flags;
-
- /*
- * The following is a hack to make some PCI card drivers work,
- * which set the SA_SHIRQ flag.
- */
-
- flags &= ~SA_SHIRQ;
-
- if (flags == SA_INTERRUPT) {
- printk ("%s: SA_INTERRUPT changed to IRQ_TYPE_SLOW for %s\n",
- __FUNCTION__, devname);
- flags = IRQ_TYPE_SLOW;
- }
- if (flags < IRQ_TYPE_SLOW || flags > IRQ_TYPE_PRIO) {
- printk ("%s: Bad irq type 0x%lx <0x%lx> requested from %s\n",
- __FUNCTION__, flags, oflags, devname);
- return -EINVAL;
- }
- if (!IS_VALID_INTNO(irq)) {
- printk ("%s: Unknown irq %d requested from %s\n",
- __FUNCTION__, irq, devname);
- return -ENXIO;
- }
- vector = IRQ_SOURCE_TO_VECTOR(irq);
-
- /*
- * Check type/source combination: slow ints are (currently)
- * only possible for MFP-interrupts.
- */
- if (flags == IRQ_TYPE_SLOW &&
- (irq < STMFP_SOURCE_BASE || irq >= SCC_SOURCE_BASE)) {
- printk ("%s: Slow irq requested for non-MFP source %d from %s\n",
- __FUNCTION__, irq, devname);
- return -EINVAL;
- }
-
- if (vectors[vector] == bad_interrupt) {
- /* int has no handler yet */
- irq_handler[irq].handler = handler;
- irq_handler[irq].dev_id = dev_id;
- irq_param[irq].flags = flags;
- irq_param[irq].devname = devname;
- vectors[vector] =
- (flags == IRQ_TYPE_SLOW) ? slow_handlers[irq-STMFP_SOURCE_BASE] :
- (flags == IRQ_TYPE_FAST) ? atari_fast_irq_handler :
- atari_prio_irq_handler;
- /* If MFP int, also enable and umask it */
- atari_turnon_irq(irq);
- atari_enable_irq(irq);
-
- return 0;
- }
- else if (irq_param[irq].flags == flags) {
- /* old handler is of same type -> handlers can be chained */
- irq_node_t *node;
- unsigned long flags;
-
- local_irq_save(flags);
-
- if (irq_handler[irq].handler != atari_call_irq_list) {
- /* Only one handler yet, make a node for this first one */
- if (!(node = new_irq_node()))
- return -ENOMEM;
- node->handler = irq_handler[irq].handler;
- node->dev_id = irq_handler[irq].dev_id;
- node->devname = irq_param[irq].devname;
- node->next = NULL;
-
- irq_handler[irq].handler = atari_call_irq_list;
- irq_handler[irq].dev_id = node;
- irq_param[irq].devname = "chained";
- }
-
- if (!(node = new_irq_node()))
- return -ENOMEM;
- node->handler = handler;
- node->dev_id = dev_id;
- node->devname = devname;
- /* new handlers are put in front of the queue */
- node->next = irq_handler[irq].dev_id;
- irq_handler[irq].dev_id = node;
-
- local_irq_restore(flags);
- return 0;
- } else {
- printk ("%s: Irq %d allocated by other type int (call from %s)\n",
- __FUNCTION__, irq, devname);
- return -EBUSY;
- }
-}
-
-void atari_free_irq(unsigned int irq, void *dev_id)
-{
- unsigned long flags;
- int vector;
- irq_node_t **list, *node;
-
- if (!IS_VALID_INTNO(irq)) {
- printk("%s: Unknown irq %d\n", __FUNCTION__, irq);
- return;
- }
-
- vector = IRQ_SOURCE_TO_VECTOR(irq);
- if (vectors[vector] == bad_interrupt)
- goto not_found;
-
- local_irq_save(flags);
-
- if (irq_handler[irq].handler != atari_call_irq_list) {
- /* It's the only handler for the interrupt */
- if (irq_handler[irq].dev_id != dev_id) {
- local_irq_restore(flags);
- goto not_found;
- }
- irq_handler[irq].handler = NULL;
- irq_handler[irq].dev_id = NULL;
- irq_param[irq].devname = NULL;
- vectors[vector] = bad_interrupt;
- /* If MFP int, also disable it */
- atari_disable_irq(irq);
- atari_turnoff_irq(irq);
-
- local_irq_restore(flags);
- return;
- }
-
- /* The interrupt is chained, find the irq on the list */
- for(list = (irq_node_t **)&irq_handler[irq].dev_id; *list; list = &(*list)->next) {
- if ((*list)->dev_id == dev_id) break;
- }
- if (!*list) {
- local_irq_restore(flags);
- goto not_found;
- }
-
- (*list)->handler = NULL; /* Mark it as free for reallocation */
- *list = (*list)->next;
-
- /* If there's now only one handler, unchain the interrupt, i.e. plug in
- * the handler directly again and omit atari_call_irq_list */
- node = (irq_node_t *)irq_handler[irq].dev_id;
- if (node && !node->next) {
- irq_handler[irq].handler = node->handler;
- irq_handler[irq].dev_id = node->dev_id;
- irq_param[irq].devname = node->devname;
- node->handler = NULL; /* Mark it as free for reallocation */
- }
-
- local_irq_restore(flags);
- return;
-
-not_found:
- printk("%s: tried to remove invalid irq\n", __FUNCTION__);
- return;
-}
-
-
/*
* atari_register_vme_int() returns the number of a free interrupt vector for
* hardware with a programmable int vector (probably a VME board).
{
int i;
- for(i = 0; i < 32; i++)
- if((free_vme_vec_bitmap & (1 << i)) == 0)
+ for (i = 0; i < 32; i++)
+ if ((free_vme_vec_bitmap & (1 << i)) == 0)
break;
-
- if(i == 16)
+
+ if (i == 16)
return 0;
free_vme_vec_bitmap |= 1 << i;
- return (VME_SOURCE_BASE + i);
+ return VME_SOURCE_BASE + i;
}
void atari_unregister_vme_int(unsigned long irq)
{
- if(irq >= VME_SOURCE_BASE && irq < VME_SOURCE_BASE + VME_MAX_SOURCES) {
+ if (irq >= VME_SOURCE_BASE && irq < VME_SOURCE_BASE + VME_MAX_SOURCES) {
irq -= VME_SOURCE_BASE;
free_vme_vec_bitmap &= ~(1 << irq);
}
}
-int show_atari_interrupts(struct seq_file *p, void *v)
-{
- int i;
-
- for (i = 0; i < NUM_INT_SOURCES; ++i) {
- if (vectors[IRQ_SOURCE_TO_VECTOR(i)] == bad_interrupt)
- continue;
- if (i < STMFP_SOURCE_BASE)
- seq_printf(p, "auto %2d: %10u ",
- i, kstat_cpu(0).irqs[i]);
- else
- seq_printf(p, "vec $%02x: %10u ",
- IRQ_SOURCE_TO_VECTOR(i),
- kstat_cpu(0).irqs[i]);
-
- if (irq_handler[i].handler != atari_call_irq_list) {
- seq_printf(p, "%s\n", irq_param[i].devname);
- }
- else {
- irq_node_t *n;
- for( n = (irq_node_t *)irq_handler[i].dev_id; n; n = n->next ) {
- seq_printf(p, "%s\n", n->devname);
- if (n->next)
- seq_puts(p, " " );
- }
- }
- }
- if (num_spurious)
- seq_printf(p, "spurio.: %10u\n", num_spurious);
-
- return 0;
-}
-
-
git://git.onelab.eu / linux-2.6.git / blobdiff